2-3/8" Grommet Set for 2" Hole, Putty
Description
2-3/8 Grommet Set For 2 Inch Hole Use
2-3/8 grommet set for 2 inch hole gives you a two-piece solution with a grommet cap and matching hole liner, so the edge of a 2 inch bore hole is finished cleanly and wires pass through a defined opening. The cap has a permanent cut out for wires, which keeps the cable opening consistent and avoids improvised field cuts around the hole. This style grommet is part of a range available in eight sizes from 3/4 inch bore hole diameter to 4 inch bore hole diameter, so it aligns with common cutout sizes on multimedia and workspace components. The SAP description grommet+cap, putty identifies the putty color finish, which blends with many neutral work surfaces in shelf, closet, and garage organization layouts.
Key Grommet Details For Workspace Planning
- The two-piece design with grommet cap and hole liner covers the raw bore edge, which helps present a finished look on desks, shelves, and closet panels where cables pass through.
- The permanent cut out in the cap defines a consistent wire path, which helps route cords through the work surface without enlarging the hole or weakening the surrounding material.
- The 2-3/8 grommet set for 2 inch hole pairs the stated size with the 2 inch bore requirement, which helps match the grommet to standard drilled openings in multimedia and workspace components.
- The availability in eight sizes from 3/4 inch bore hole diameter to 4 inch bore hole diameter supports layouts using multiple cutout sizes, which helps keep a coordinated look across different stations.
- The SAP description grommet+cap, putty and web description category of multimedia and workspace components tie this part to workstation cable pass-through roles, which streamlines planning for organized wire runs.
Mounting This Grommet In A 2 Inch Bore
This style grommet is designed for a 2 inch bore hole diameter, so it works where the panel or desktop has already been drilled to that measurement. The two-piece structure with cap and hole liner lets the liner sit inside the 2 inch bore while the cap covers the opening from the surface side, which results in a neat cable entry point. Being part of a grommet range used on multimedia and workspace components keeps this set aligned with typical panel-thickness cutouts used in those environments.
Using This TG3-93 Grommet In Real Projects
Where This Putty Grommet Set Performs Best
The product name 2-3/8 grommet set for 2 inch hole, putty and its placement under shelf, closet and garage organization and multimedia and workspace components show it working in desktops, worktops, and storage panels that carry cables. The 2 inch bore hole diameter reference ties directly to standard hole saw sizes used in those panels, so this set fits pre-planned routing points. With the cap and liner sold together, the edge of the cutout and the visible opening are handled as one matched assembly, which supports a consistent appearance across multiple work areas. The putty color identified in both the product name and SAP description suits neutral furniture and casework where a low-contrast cable pass-through is desired around equipment or power strips.
Details That Support Repeatable Wire Pass-Through Results
The cap has a permanent cut out for wires, so every installation presents the same opening geometry, which is useful when multiple grommets in a run must guide similar cable bundles. The style being available in eight sizes from 3/4 inch bore hole diameter to 4 inch bore hole diameter means the same design language can be carried across small device leads and larger cable clusters, simplifying layout decisions. Identifying the manufacturer part number as TG3-93 ties this exact putty version to Doug Mockett and Company, Inc., which helps match the appearance when repeating the part within a project. Being categorized under grommets within multimedia and workspace components emphasizes its role as a dedicated cable pass-through point, which helps keep wiring paths predictable on built-in work surfaces and organization systems.
Common Questions About The TG3-93 Grommet Set
What hole size does this grommet set work with?
This 2-3/8 grommet set for 2 inch hole is designed for a 2 inch bore hole diameter, so it matches standard 2 inch drilled openings in worktops and panels.
How does the two-piece grommet construction help my installation?
The grommet+cap, putty design uses a hole liner and separate cap, so the liner finishes the bore edge while the cap presents a clean, defined opening at the surface.
What is the purpose of the permanent wire cut out in the cap?
The cap has permanent cut out for wires, providing a fixed cable opening that guides cords through the surface without altering the bore size.
Where is this grommet typically used in projects?
This style grommet is listed under multimedia and workspace components and shelf, closet and garage organization, so it serves as a cable pass-through in those installations.
What does the TG3-93 part number indicate?
The manufacturer part TG3-93 from Doug Mockett and Company, Inc. identifies this specific putty color grommet+cap set within the TG3 family.
Are there other bore sizes available in this grommet style?
This style grommet is available in eight sizes from 3/4 inch bore hole diameter to 4 inch bore hole diameter, covering a range of cutout requirements.
Selecting This Grommet Set For Your Layout
The 2-3/8 grommet set for 2 inch hole, putty pairs a grommet cap and hole liner around a 2 inch bore, so a single part finishes both the cut edge and the visible wire opening. With a permanent cut out for wires and sizing that matches standard multimedia and workspace openings, this TG3-93 set from Doug Mockett and Company, Inc. supports clean, repeatable cable routing wherever Wurth Baer Supply projects call for a neutral putty pass-through.
