1-3/4" Grommet Cap and Liner Set for 1-1/2" Hole, Putty

1-3/4 Grommet Cap And Liner Set For Clean Pass-Through

1-3/4 grommet cap and liner set from Doug Mockett and Company, Inc. creates a finished pass-through in a 1-1/2 inch hole, which helps tidy cable routes in desktops, cabinets, or panels while covering raw bore edges for a more professional look. This style grommet has two pieces, a grommet cap and a hole liner, so the liner seats in the bore while the cap finishes the surface for a snug, uniform opening. The cap has a permanent cut out for wires that lets cords pass through the center opening without extra cutting in the field, saving layout time on repetitive installations. As part of Mockett multimedia and workspace components, this grommet fits into standard work surfaces or closets where wire management is needed, helping organize small cable runs at the panel level.

Key Grommet Details That Support Daily Use

• The 1-3/4 inch grommet cap size matched to a 1-1/2 inch bore hole lets the liner sit in the drilled opening while the cap overlaps the edge, which helps hide drill tolerances and keeps the cutout looking consistent across multiple panels.
• The two-piece design with separate cap and hole liner lets the liner protect the sidewalls of the bore while the cap handles cable access, which reduces wear on the panel material around the cutout during everyday cord movement.
• The cap has a permanent cut out for wires, so cables always pass through the same shaped opening, which helps maintain a controlled exit point for cords and avoids rough field modifications during installation.
• The grommet is categorized under multimedia and workspace components, so it is suited to desks, workstations, or similar surfaces, which simplifies selecting it for runs where data, power, or AV cables pass through furniture or cabinetry.
• The product is identified as a grommet cap and liner set, so both bore protection and surface finishing functions are handled by the same part number, which streamlines ordering for repeated shop or jobsite builds.

Hole, Bore, And Cap Fit For This Grommet

This grommet cap and liner set is designed for a 1-1/2 inch bore hole, so drilling that hole size establishes the opening where the liner seats, giving a defined target for both shop and field fabrication. The cap is described as 1-3/4 inch, so it extends beyond the bore diameter and overlaps the panel surface, helping cover minor chip-out at the edge of the drilled hole. This style grommet uses a hole liner, so the liner engages the vertical walls of the bore and the cap interfaces with the liner, which provides a predictable fit once the correct bore size is drilled. With its permanent wire cut out in the cap, the fit between the bore, liner, and cap keeps cables grouped through a central passage instead of wandering against unfinished panel edges.

Using This Grommet Set In Workspace Projects

Where This Putty Grommet Works In Furniture

This Doug Mockett and Company, Inc. grommet sits in the grommets product class and multimedia and workspace components category, so it matches applications like desks, workstations, and cabinetry where cables transition through a panel. The putty version identified by manufacturer part BG3-93 offers a neutral tone in those environments, helping the 1-3/4 inch cap visually blend into many laminate or painted work surfaces. Because the grommet is specified for a 1-1/2 inch bore hole, it suits layouts that already use that drill size across panels, supporting consistent hole planning on shop drawings. The combination of cap and liner helps finish both the top surface and bore walls, giving a more refined look to modest cable pass-throughs in office, closet, or garage organization layouts.

Why The Wire Cutout And Liner Improve Results

The cap on this style grommet has a permanent cut out for wires, so every opening presents a fixed cable path rather than a field-altered notch, which helps keep cord exits uniform from one station or cabinet to the next. The two-piece approach with grommet cap and hole liner means the liner protects the drilled 1-1/2 inch bore while the cap covers the face, which supports cleaner edges over time as wires slide against the grommet instead of bare substrate. The 1-3/4 inch cap dimension relative to the 1-1/2 inch bore means the cap overhangs the hole, which can hide small drilling imperfections and keep the finished diameter visually consistent even when panels vary slightly. Being sold in full box quantities only ties this grommet to batch work, letting shops standardize on one BG3-93 part for runs of desks, tops, or panels that share the same cable-routing layout.

Common Questions About The BG3-93 Grommet Set

Selecting This Grommet Set For Your Next Run

The 1-3/4 grommet cap and liner set for a 1-1/2 inch hole in putty gives a defined solution for finishing cable pass-throughs in desks, cabinets, or closet systems. With its two-piece style, the Doug Mockett and Company, Inc. BG3-93 set handles both bore protection and surface finishing, simplifying repeat use across a job. The permanent wire cut out in the cap sets a consistent route for cords, supporting tidy layouts in multimedia and workspace components. When a project calls for multiple matching openings using a 1-1/2 inch bore hole, this full box quantity offering lets shops standardize on a single grommet detail.