2" Grommet Set For Clean Wire Pass-Through

2" grommet set for 1-3/4" hole white describes a two-piece Doug Mockett and Company, Inc. grommet designed for routing wires through a work surface, so cable runs pass through a finished opening instead of a raw bore hole. The set is identified as Manufacturer Part # SG3-95, which ties this specific size and color directly to the Doug Mockett line for repeat ordering and matching across projects. The product sits in the Multimedia and Workspace Components grommets category, so it is suited to desks, counters, or similar surfaces where wires need an organized pass-through point. The white finish lets the grommet visually blend into light-colored worktops and furniture, which helps keep the installation looking intentional rather than like a retrofit opening cut into the surface.

Practical Details That Support Workspace Wiring

• This style grommet has two pieces; grommet cap and hole liner, so the bore hole edge is covered by a liner while the cap finishes the top side, giving a cleaner, more professional appearance around the opening.
• The cap has a permanent cut out for wires, providing a fixed cable opening that keeps cords in a defined path, which helps reduce strain on conductors and keeps the work surface tidier over daily use.
• The set is part of a series available in eight sizes from 3/4" bore hole depth diameter to 4" bore hole diameter, so installers can standardize on this style across different hole sizes while keeping a consistent look and function.
• The described set is a 2" grommet set for 1-3/4" hole, meaning the liner is sized for a 1-3/4" bore hole while the visible grommet face is 2", giving edge coverage that hides minor drilling irregularities.

Mounting Fit Around The 1-3/4 Inch Bore Hole

The 2" grommet set for 1-3/4" hole uses a hole liner sized to drop into a 1-3/4" bore hole, so installers can drill that standard diameter and rely on the liner to cover the cut edge. The 2" grommet dimension then refers to the cap profile at the surface, which overlaps the liner and surrounding material, helping mask slight tear-out or chipping from drilling. Because the cap has a permanent cut out for wires, there is no need to modify the opening after drilling; cables pass through the designated opening in the cap, which supports a predictable routing path on every install.

Where Doug Mockett SG3-95 Grommet Set Works

White Grommet And Liner For Workspace Surfaces

The Doug Mockett and Company, Inc. SG3-95 grommet is classified under Multimedia and Workspace Components, so it aligns with applications like desks, countertops, and workstations where signal or power cables need to route through the surface. Its role in the Grommets product class means it is intended as the finishing interface between the bore hole and the wiring, giving a defined, durable edge for the cable path. The 2" grommet dimension paired with a 1-3/4" bore hole lets the visible cap sit slightly larger than the drilled opening, which helps give a precise-looking installation even when holes are cut quickly with standard bits. The white color supports use on light cabinetry or laminate worktops where a neutral pass-through point is desired.

Details That Support Consistent Cable Management Results

The grommet cap with permanent cut out for wires creates a dedicated exit path, so repeated installations can follow the same cable routing pattern, maintaining consistent layouts across multiple workstations. The two-piece design, with grommet cap and hole liner, means the liner engages the bore hole while the cap finishes the surface, which aids in repeatable seating depth and alignment from one install to the next. Being part of a range available in eight sizes from 3/4" bore hole depth diameter to 4" bore hole diameter allows planners to choose the SG3-95 size for 1-3/4" holes while coordinating other sizes in the same style where different bore diameters are present. The SAP description "GROMMET+CAP, WHITE" reinforces that this configuration is a combined cap and liner in a white finish, helping standardize specifications and ordering on larger jobs.

Common Questions About This White Wire Grommet Set

Selecting This SG3-95 Grommet For Your Project

The 2" grommet set for 1-3/4" hole white from Doug Mockett and Company, Inc. combines a grommet cap and hole liner sized for a 1-3/4" bore hole, giving a defined, white-finished pass-through point for wires on multimedia and workspace surfaces. With its permanent cut out for wires and membership in a broader eight-size series, this SG3-95 model supports consistent cable routing and appearance wherever a 1-3/4" bore hole is part of the layout.