Description
2-3/8 Grommet Set For 2 Inch Hole Use
2-3/8 grommet set for 2 inch hole white is a two-piece Doug Mockett and Company, Inc. TG3-95 grommet designed to finish a 2 inch bore hole cleanly. The set uses a grommet cap and matching hole liner so the cut edge of the work surface is covered all around, which helps present a finished opening in desktop, shelf, closet, or garage organization projects. The white color supports a neutral look in multimedia and workspace components where a visible trim ring is part of the design. The 2-3/8 inch grommet size is matched to a 2 inch bore hole, giving a predictable fit for hole boring and layout in shop or field work. As part of Wurth Baer Supply's grommet offering, this set fits into typical woodworking workflows where wire pass-through and surface appearance both matter.
Practical Details Of This White Grommet Set
- This style grommet has two pieces - a grommet cap and a hole liner - so both the top surface and inner edge of the 2 inch bore hole are finished in a consistent white ring for a neater installation.
- The cap has a permanent cut out for wires, creating a defined cable path through the work surface so cords from multimedia or workspace components pass through the 2 inch hole without bearing directly on the panel edge.
- The 2-3/8 inch grommet size for a 2 inch bore hole lets installers drill a standard round opening and then drop in the liner and cap, which supports repeatable layouts across multiple workstations, shelves, or closets.
- As a grommet in the Shelf, Closet & Garage Organization and Multimedia and Workspace Components categories, this part is suited to routing power or data cables through cabinetry and worktops so installations stay organized behind the finished white trim.
Fit And Installation Role In Bored 2 Inch Holes
The 2-3/8 grommet set for 2 inch hole white is sized so a 2 inch bore hole accepts the liner first, then the cap, turning a drilled opening into a controlled cable pass-through. The hole liner works as a sleeve around the bore hole depth diameter, which protects the edge of the panel and provides a consistent seat for the cap. With the cap's permanent cut out for wires, cables exit the work surface at a single fixed opening, guiding the routing pattern in multimedia and workspace installations. Using this TG3-95 grommet as the trim point simplifies layout because the installer only needs to plan the 2 inch hole location to integrate cable paths into closet, shelf, or garage organization projects.
Using The TG3-95 Grommet Set In Projects
Where This Doug Mockett Grommet Set Fits Best
The TG3-95 grommet from Doug Mockett and Company, Inc. sits in the Grommets product class under Shelf, Closet & Garage Organization and Multimedia and Workspace Components, which positions it for projects where cables must pass through a panel. The 2-3/8 inch grommet set for 2 inch hole white serves worktops, shelves, and panels with a 2 inch bore hole, letting installers use a single hole size across multiple locations. The white finish can be matched to light-colored cabinetry or work surfaces so the visible ring around the opening reads as part of the overall design rather than a contrasting trim piece. In closets and garage organization, the set provides a route for power cords, chargers, or low-voltage leads through panels while maintaining a defined circular opening.
Why The Two-Piece Design Supports Repeatable Results
The two-piece construction - a grommet cap and a hole liner - means the bore hole depth diameter is handled by the liner while the cap finishes the surface, so the installer works with one consistent assembly rather than field-building an edge treatment. The permanent cut out for wires in the cap fixes the exit point of cords, which helps standardize cable presentation across multiple workstations or cabinet sections. Because the grommet is defined as a 2-3/8 inch set for a 2 inch bore hole, boring operations can be planned with a single drill size, improving alignment when repeating that 2 inch hole through a run of panels. In multimedia and workspace components, this consistency keeps equipment cabling organized around the same opening style wherever the TG3-95 grommet is used.
Common Questions About The TG3-95 White Grommet
What is the role of the TG3-95 grommet set?
The TG3-95 grommet set provides a finished opening in a 2 inch bore hole so cables can pass through shelves, closets, garages, and work surfaces with a defined white trim ring.
How does the two-piece grommet and cap design work?
The grommet and cap white set uses a liner in the bore hole and a cap on the surface, so the drilled edge and visible opening are both finished for a cleaner cable pass-through.
Why is the grommet described as 2-3/8 for a 2 inch hole?
The 2-3/8 grommet set for 2 inch hole white is sized so a 2 inch bore hole receives the liner while the outer ring dimension defines the visible trim at the panel surface.
How does the permanent wire cutout affect cable routing?
The cap has a permanent cut out for wires, which establishes a single exit point at the grommet so multimedia and workspace cables follow a predictable path through the panel.
Where is this grommet typically applied?
This style grommet is listed for Shelf, Closet & Garage Organization and Multimedia and Workspace Components, so it serves cabinet, closet, and workstation panels carrying cables.
What does the white finish contribute in an installation?
The white grommet set for 2 inch hole presents a neutral trim around the opening, supporting projects built with light-colored closets, shelves, or worktops.
Select This Grommet Set For 2 Inch Bore Work
The 2-3/8 grommet set for 2 inch hole white offers a defined way to finish cable pass-through points when drilling 2 inch bore holes in shelves, closets, garages, or work surfaces. With its two-piece grommet cap and hole liner design, the TG3-95 set from Doug Mockett and Company, Inc. turns a bored opening into a controlled route for wiring in multimedia and workspace components. For projects running multiple identical openings, this grommet standardizes the visible trim and cable exit so Wurth Baer Supply customers can plan layouts around a single, consistent grommet detail.
