Round wire grommets from Doug Mockett and Company, Inc. give you a dedicated pass-through point in desktops, shelves, or panels by using a matched cap and liner set, so wire runs stay predictable and controlled across the surface. This style grommet is built as two pieces - a grommet cap and a hole liner - which means the liner addresses the bore hole edge while the cap presents a finished opening on the working face. The cap has a permanent cut out for wires, providing a fixed opening that keeps cables in a consistent path instead of drifting across the work area. Available in eight sizes from 3/4 inch bore hole diameter to 4 inch bore hole diameter, this BG5-3 brass plated option fits into that range so you can align the bore hole to the job layout and panel size.
This Round Wire Grommets, 3/4 inch to 4 inch Bore Hole Two Piece Plastic - Doug Mockett And Company, Inc. BG5-3 part is designed around a bore hole installation, so the panel receives a drilled opening sized within the 3/4 inch to 4 inch diameter range of the series. The hole liner from this style grommet occupies that bore, addressing the raw edge and establishing a cylindrical seat. The grommet cap then interfaces with the liner, presenting the brass plated face and the permanent wire cut out at the top. That relationship between bore hole, liner, and cap helps keep the visible opening consistent, even when panel material varies across different furniture or cabinetry runs.
The Round Wire Grommets, 3/4 inch to 4 inch Bore Hole Two Piece Plastic - Doug Mockett And Company, Inc. BG5-3 part sits in the Multimedia and Workspace Components category, placing it in environments where cables pass through desks, counters, and cabinetry panels. As a grommet in the Grommets product class, it serves as the transition point between the front working surface and the concealed space behind or below, allowing wire runs to move from devices to power or data access. The brass plated cap surface, as indicated in the SAP description, supports use in installations where visible trim needs to relate to brass-toned hardware or fixtures in the surrounding workspace. By relying on a matching cap and hole liner design, the assembly maintains a defined passage even as panels flex within normal conditions.
The two-piece plastic construction described for this style grommet provides a cap and liner relationship that accommodates the bore hole while presenting a controlled opening topside. Within the available eight sizes from 3/4 inch bore hole diameter to 4 inch bore hole diameter, an installer can select a BG5-series option that matches the planned opening in desktops or cabinet panels used for computer equipment or other multimedia setups. The permanent cut out for wires on the cap sets a stable pattern for cable routing, important when arranging power, data, or audio leads along the same path. In day-to-day workspace use, that fixed opening helps maintain cable routing consistency across multiple workstations that share the same grommet specification.
The BG5-3 part is a Round Wire Grommets, 3/4 inch to 4 inch Bore Hole Two Piece Plastic assembly, so it functions as a wire pass-through point in a drilled panel opening.
The BG5-3 grommet uses a hole liner in the bore hole and a cap above, so the liner addresses the hole edge while the cap forms the visible, brass plated wire opening.
The BG5-3 cap has a permanent cut out for wires, creating a fixed passage that keeps cables grouped through one defined opening in the work surface.
The series with BG5-3 is available in eight sizes from 3/4 inch bore hole diameter to 4 inch bore hole diameter, supporting different panel openings for varied layouts.
The SAP description GROMMET+CAP,BRASS PLATED indicates a brass plated cap surface, which visually aligns with brass-toned hardware around the workspace opening.
The BG5-3 grommet is listed under Multimedia and Workspace Components in the Grommets class, positioning it for use in cabinetry and furniture for cable routing.
The Round Wire Grommets, 3/4 inch to 4 inch Bore Hole Two Piece Plastic - Doug Mockett And Company, Inc. BG5-3 design pairs a brass plated cap with a dedicated hole liner, giving each bore hole a defined, repeatable cable opening. With a permanent cut out for wires on the cap and a liner built for bore hole installation, the assembly supports organized routing in multimedia and workspace components. For projects where grommets from 3/4 inch to 4 inch bore hole diameter are specified, this BG5-3 option from Wurth Baer Supply aligns the visible trim and wire passage with the broader layout.
Sold In: 5 Set
