3-1/2" Grommet Cap and Liner Set, Polished Brass

3-1/2 Grommet Cap And Liner For Clean Wire Pass

3-1/2 grommet cap and liner gives a finished wire pass-through point in shelves, closets, or multimedia work surfaces. The product is a grommet cap and liner set, so the bore edge and the visible opening both get a matched treatment, which helps keep cut edges covered on the work surface side and inside the hole. The style grommet has two pieces - grommet cap and hole liner - so you can drill the specified bore and then drop the liner and cap in as a pair, creating a consistent wire port across similar work areas. The cap has a permanent cut out for wires, which keeps a defined opening rather than an adjustable shutter, so cables route the same way every time. The grommet is polished brass and brass plated, which presents a bright brass appearance that coordinates with brass-toned hardware on cabinetry or desks.

Key Grommet Details For Workspace Planning

• The grommet cap and liner set format lets the liner sit in the bore while the cap finishes the surface, so installers can hide raw hole edges and present a uniform trim ring around wire exits.
• The cap has a permanent cut out for wires, which maintains a fixed opening size and position, supporting predictable routing paths when repeating the same layout across multiple tops or panels.
• The grommet is polished brass and brass plated, so the visible cap surface offers a brass look that can align with other brass-finished components in multimedia and workspace builds.
• The grommet style is part of a line available in eight sizes from 3/4 inch bore hole diameter to 4 inch bore hole diameter, which allows selection across that range to keep a consistent style where different bore sizes are required.
• The product is identified as Manufacturer Part XG5-3 in the grommets class from Doug Mockett and Company, Inc., so specifiers can call out this exact style when matching to other multimedia and workspace components.

Installation Use Around The Bore Hole Opening

This style grommet is designed around a bore hole opening, so the cap and liner work together with a drilled hole in the work surface. The product is part of a group that covers bore hole diameters from 3/4 inch to 4 inch, so this specific 3-1/2 inch grommet cap and liner set fits into that sizing family when planning hole saw or boring tool selections. The cap has a permanent cut out for wires, meaning the opening is always present, so routing paths do not rely on moving parts during installation. Being a polished brass, brass plated grommet within multimedia and workspace components, it ties into surface hardware planning when positioning wire exits near other visible fittings.

Using This Polished Brass Grommet In Workspaces

Where This Grommet Cap And Liner Set Fits

The grommet is categorized under shelf, closet and garage organization and multimedia and workspace components, so it is suited to panels and tops in those environments where wiring needs to pass through. As a grommet in the grommets product class, it functions specifically as a trim and protection point around a bore hole, rather than as structural hardware. The style grommet has two pieces - grommet cap and hole liner - so the liner nests in the bored opening while the cap sits on the surface, giving both edges of the hole a defined interface that supports repeated cable movement. Because the product is polished brass and brass plated, it visually connects with brass-finished knobs, pulls, or other decorative elements on furniture or closet systems in the same area.

Why The XG5-3 Details Matter For Results

The manufacturer part XG5-3 designation provides a precise reference when ordering or specifying, which helps maintain consistency across multiple workstations, shelves, or closet panels that rely on the same grommet profile. The cap has a permanent cut out for wires, so once the cap and liner set is installed, the wire path is always open and in the same location, which can simplify drawing layouts and field measurements for electricians or low-voltage installers. Being part of a line available in eight sizes from 3/4 inch to 4 inch bore hole diameter, this 3-1/2 inch work surface wire grommet can match the visual style of other bore sizes used nearby, helping maintain a unified appearance even when device or cable bundles demand different hole diameters. The polished brass finish and brass plated description mean the visible surfaces present a brass tone, supporting a coordinated look across multimedia desk grommet locations in offices, home workspaces, or organized storage areas.

Common Questions About The XG5-3 Brass Grommet

Select This Grommet Set For Defined Wire Pass Points

The 3-1/2 grommet cap and liner from Doug Mockett and Company, Inc. offers a polished brass, brass plated finish with a permanent wire cutout, so it gives a consistent wire exit and a finished bore edge wherever a matching XG5-3 opening is planned.