3-1/2" Wire Grommet Set for 3" Hole, White

3-1/2" Wire Grommet Set For Clean Cable Runs

3-1/2" wire grommet set for 3" hole white defines this Doug Mockett and Company, Inc. solution for routing wires through surfaces, so cables pass through a finished opening instead of a raw cutout. The set is designed for a 3" bore hole diameter, which lets installers core a standard circular opening while knowing the liner and cap will cover the cut edge. The style uses a grommet cap and a hole liner as two pieces, so the liner protects the bore hole while the cap finishes the visible surface. The white finish helps this wire pass-through blend into light-colored furniture or work surfaces, keeping the opening visually quiet in office or closet layouts. This style is part of a broader series available in eight sizes from 3/4" bore hole diameter to 4" bore hole diameter, which supports consistent detailing across different cable capacities.

Key Wire Grommet Details For Practical Use

• The grommet set is specified for a 3" bore hole diameter, so drilling that size hole provides a matching opening that the liner occupies tightly for a finished edge.
• The overall grommet is identified as a 3-1/2" wire grommet set, which gives extra flange coverage around the 3" bore and helps hide minor chipping at the hole perimeter in wood or laminate.
• The design uses two pieces, a grommet cap and a hole liner, so the liner shields the cut surface while the cap creates the visible trim ring where wires exit.
• The cap has a permanent cut out for wires, creating a defined pass-through opening that keeps cables grouped and reduces abrasion at the edge.
• The white version under manufacturer part XG3-95 aligns with light-colored desks, shelving, or closet components, keeping the cable exit point visually consistent with those surfaces.

Grommet Fit And Installation Considerations

This wire grommet set is engineered around a 3" bore hole diameter, so boring that hole size establishes the core opening that the liner occupies for a snug mechanical fit. The 3-1/2" identification provides additional flange beyond the bore, which covers the surrounding material and hides roughness around the edge after drilling. Because the style uses two pieces - grommet cap and hole liner - the installer places the liner into the bored opening first, then seats the cap into the liner for a flush surface detail. The permanent cut out for wires means the pass-through opening is fixed, so cable bundles follow a consistent exit point instead of shifting around a partially open ring. The white finish of the cap and liner coordinates with light worktops, shelving, or panel systems, so the completed opening reads as part of the surface rather than a contrasting insert.

Using This Wire Grommet Set In Projects

Where This Grommet Set Is Typically Applied

The 3-1/2" wire grommet set for 3" hole white is suited to surfaces that require a 3" bore hole diameter for cable routing, such as desks, countertops, or workspace panels, because it dresses the opening while allowing wires to pass freely. The two-piece construction with grommet cap and hole liner gives cabinetmakers and shop installers a way to protect the bore hole in wood or composite materials while finishing the top side with a clean white trim. Since the cap has a permanent cut out for wires, this set works well in locations where wires are expected to remain in place, such as fixed computer stations, media shelves, or closet organization runs. The availability of this style in eight sizes from 3/4" bore hole diameter to 4" bore hole diameter supports projects that use multiple cable pass-through points with varying capacities but a consistent visual family. The manufacturer part XG3-95 identifies the specific white version, which helps standardize choice whenever that finish is desired across repeating workstations or shelving runs.

Why These Details Matter For Repeatable Results

The defined 3" bore hole diameter means boring operations can be set once on-site or in the shop, and the same setting is reused wherever this XG3-95 wire grommet set is specified, which helps maintain consistent clearances for cable bundles. The 3-1/2" overall wire grommet set dimension provides extra bearing surface around the opening, so the flange overlaps minor drill wander or chip-out at the edge and preserves a clean finished circle. Because the style uses a grommet cap and hole liner, installers handle finishing and edge protection in one step, with the liner shielding the bore walls while the cap forms the contact point for wires exiting the opening. The permanent cut out for wires fixes the path of the cables, which keeps the opening organized and helps keep wires centered instead of rubbing against raw material. The white finish specified in the SAP description as GROMMET+CAP, WHITE coordinates with light-toned cabinetry, closet systems, and work surfaces, allowing repeated installations without revisiting color decisions.

Common Questions About The XG3-95 Wire Grommet

Selecting This Grommet Set For Your Install

The 3-1/2" wire grommet set for 3" hole white pairs a 3" bore hole diameter with a two-piece grommet cap and hole liner, giving installers a clear drilling target and a clean finished opening for cable pass-through. The permanent cut out for wires in the cap defines the cable path, while the 3-1/2" flange dimension helps visually clean up the drilled area around the hole. For projects using light-colored desks, shelving, or closet components, the GROMMET+CAP, WHITE configuration under manufacturer part XG3-95 provides a repeatable, identifiable choice when planning multiple cable locations.