1-5/16" Grommet Cap and Liner Set for 1" Hole, White

1-5/16 Grommet Cap And Liner Set For Clean Wire Runs

1-5/16 grommet cap and liner set from Doug Mockett and Company, Inc. is a two piece grommet design that manages wires through a 1 inch hole, giving a defined pass through point on desks, shelves, and work surfaces. The cap and hole liner work together to finish the raw 1 inch bore, so the cut edge is covered and the opening looks planned instead of cut on site. The white finish matches light colored surfaces in shelf, closet, and multimedia installations, helping the wire pass through blend with the panel instead of standing out. The OG3-95 grommet style is built specifically for multimedia and workspace components, so it suits office furniture, workstations, and garage organization where cables need a route through the panel. The grommet class construction focuses the opening at one location, which helps keep wiring routes consistent across multiple units.

Wire Grommet Details That Support Daily Use

• This style grommet has two pieces, a grommet cap and a hole liner, which means the 1 inch bore edge is covered on both top and inside surfaces for a neater opening and reduced wear at the panel cut.
• The cap has a permanent cut out for wires, so cables always pass through the same shaped opening, helping maintain cable routing and reducing time spent repositioning or trimming openings on site.
• The set is designed for a 1 inch hole, which ties directly to a standard bore size for many desks and panels, allowing installers to drill a simple, consistent 1 inch opening across a project.
• The grommet is part of a family available in eight sizes from 3/4 inch bore hole depth diameter to 4 inch bore hole diameter, so layouts that mix equipment sizes can still maintain a common look and function across different bore diameters.
• The SAP description "GROMMET+CAP, WHITE" identifies the color at a glance during planning, which supports matching to white panels, closet systems, and workspace furniture across a project schedule.

Grommet For 1 Inch Hole Installation Workflow

The 1-5/16 inch grommet cap and liner set is sized to work with a 1 inch bore hole, so installation starts with a single standard drill size across all panels. The two piece structure means the cap drops into the lined bore, so alignment between the visible top edge and the inside liner is handled by the parts themselves instead of relying on fine trimming of the cut. The permanent cut out for wires in the cap defines a fixed cable path, which streamlines layout when repeating the same hole pattern on multiple work surfaces or closet components. Because this style belongs to the grommets class for multimedia and workspace components, it fits neatly into existing shop workflows where panel drilling and cable routing are already part of the sequence.

Using This Doug Mockett Grommet In Projects

Where This Two Piece Grommet Works Best

The OG3-95 grommet from Doug Mockett and Company, Inc. is defined as a multimedia and workspace component, so it aligns well with desks, conference tables, benching systems, and similar work areas that need organized cable pass through points. Its classification under shelf, closet, and garage organization extends its use into storage systems where power tools, chargers, or electronics require a path for cords through fixed panels. The 1 inch hole requirement lets installers standardize drilling for these applications, so panels in different rooms or zones can still use the same bore size. The white finish fits common closet systems and light colored worktops, so the opening around the cables looks like part of the design instead of a field modification. Because the grommet is part of a family spanning eight bore diameters, planning across mixed furniture or equipment zones can still keep a related look by selecting other sizes within the same style as layouts change.

Details That Support Repeatable Cable Management Results

The two piece layout, with a separate grommet cap and hole liner, creates a defined sleeve around the 1 inch bore that supports repeatable cable management on repeated installations. The liner stabilizes the inner wall of the cutout, so the cap seats consistently and the permanent cut out for wires stays oriented as intended on every unit. That permanent cut out becomes the reference point for cable exit direction, so once the opening orientation is chosen in the first installation, it can be mirrored across additional desks or panels. The OG3-95 part number ties directly to this specific style, which simplifies reordering when additional workstations or storage bays are added later. Being part of the grommets product class signals that the piece is built for panel pass through applications, so it slots naturally into hardware lists alongside other panel drilling and routing tasks without needing unique tools beyond the 1 inch bore operation.

Common Questions About This OG3-95 Grommet

Select This White Grommet For 1 Inch Bore Work

The 1-5/16 grommet cap and liner set for a 1 inch hole from Doug Mockett and Company, Inc. gives a defined, finished pass through point for cables in shelf, closet, garage, and multimedia workspace projects. The two piece structure with a cap and hole liner manages the bore edge while the permanent cut out for wires organizes the actual cable route. The OG3-95 part number and white finish detail support straightforward specifying on material lists. For projects built around 1 inch panel bores where cables must pass cleanly through the surface, this grommet style aligns with that workflow and helps keep the layout consistent.