1-3/4" Grommet Cap and Liner Set for 1-1/2" Hole, Matte Black
Description
1-3/4 Grommet Cap And Liner Set Function
1-3/4 grommet cap and liner set describes a two-piece grommet from Doug Mockett and Company, Inc. that is designed for a 1-1/2 inch hole, so it finishes a standard cutout size used in many work surfaces. The set combines a grommet cap and a hole liner, which creates a clean lined-through opening that protects the edge of the bore hole in typical woodworking applications. The cap has a permanent cut out for wires, allowing cables to pass through while the opening remains consistently shaped for repeat layouts. The product is part of the grommets class in the multimedia and workspace components category, positioning it for desktops, counters, or similar surfaces where wire pass-through is needed. Its matte black finish provides a neutral appearance that blends into many worktops and fixtures.
Key Grommet Details That Support Clean Installs
- This style grommet has two pieces, a grommet cap and a hole liner, so the cut edge of the 1-1/2 inch bore hole is shielded all around for a more finished opening.
- The cap has a permanent cut out for wires, providing a fixed pathway so cables route through the surface without relying on an open, unfinished hole.
- The set is identified as 1-3/4 inch grommet cap and liner for a 1-1/2 inch hole, aligning the visible trim size with a commonly drilled bore to simplify layout decisions.
- The grommet is in the multimedia and workspace components category, matching typical desk, counter, or equipment panel applications where wire pass-through is part of the build.
- The Doug Mockett and Company, Inc. BG3-90 designation ties this matte black grommet to a defined manufacturer part number for repeat specifying and reordering.
Installation Fit Of BG3-90 Grommet Cap Set
The 1-3/4 inch grommet cap and liner set is sized to work with a 1-1/2 inch hole, so the installer drills a straightforward round bore and relies on the liner to bridge between the cut diameter and the finished trim. Because this style grommet has two pieces, the liner seats in the bore while the cap covers the opening, helping the edge sit neatly against the surface. The permanent cut out for wires in the cap fixes the cable opening location, which helps keep pass-through alignment consistent across multiple workstations or cabinets. Being a matte black grommet in the multimedia and workspace components category, it suits dark or neutral surfaces where a low-reflection finish is preferred.
Using This Matte Black Grommet In Work Surfaces
Where This Two-Piece Grommet Set Is Applied
The grommet is part of the shelf, closet and garage organization, multimedia and workspace components grouping, so it fits applications where wires need to pass through shelving, counters, or worktops. The 1-3/4 inch grommet cap and liner set is specified for a 1-1/2 inch hole, matching a practical drill size for typical woodworking or laminate panels. In use, the hole liner drops into the 1-1/2 inch bore hole diameter, so the rough cut edge is concealed and isolated from the cables. The matte black finish from Doug Mockett and Company, Inc. supports installations in darker furniture or fixtures where visible hardware is intended to visually recede. As a BG3-90 grommet, it connects directly to a known manufacturer part number, which supports standardized use across multiple projects for consistent openings.
Why The Wire Cutout And Liner Improve Results
The cap has a permanent cut out for wires, so the opening for cables is always the same shape and location on each BG3-90 grommet, helping create uniform layouts across a run of workstations or cabinets. Because this style grommet has two pieces, the liner and cap work together to protect the cable pathway; the liner guards the 1-1/2 inch bore hole edge while the cap controls how wires exit the surface. The 1-3/4 inch cap size gives a trim ring that overhangs the bore slightly, helping cover minor drilling variances around the hole. As a grommet in the multimedia and workspace components family, it is suited to routing power, data, or similar wires through surfaces instead of leaving open cutouts. The matte black identification in the SAP description as GROMMET+CAP, BLACK signals a dark finish that coordinates with matching hardware or surfaces.
Common Questions About BG3-90 Grommet Details
What hole size does the BG3-90 grommet set work with?
The 1-3/4 inch grommet cap and liner set is for a 1-1/2 inch hole, so a 1-1/2 inch bore establishes the opening this liner and cap are designed to finish.
How does the two-piece cap and liner design function?
The style has two pieces, a grommet cap and hole liner, so the liner seats in the bore hole while the cap covers the top and shapes the cable exit.
What does the permanent cut out for wires do?
The cap has a permanent cut out for wires, giving cables a defined passage that keeps the wire opening consistent and helps stabilize routing through the surface.
Where is this Doug Mockett grommet typically used?
The grommet is in the multimedia and workspace components category, so it suits desks, counters, shelving, and similar surfaces needing wire pass-through.
What does the BG3-90 part number represent?
BG3-90 is the manufacturer part number for this Doug Mockett and Company, Inc. matte black grommet cap and liner set, supporting consistent specification.
How is the color and finish of this grommet described?
The product name specifies matte black, and the SAP description notes GROMMET+CAP, BLACK, so it presents as a dark, non-reflective grommet in use.
Selecting This Grommet Set For Wire Openings
The 1-3/4 inch grommet cap and liner set for a 1-1/2 inch hole from Doug Mockett and Company, Inc. combines a defined wire opening with a protective liner around the bore. As a BG3-90 matte black grommet in the multimedia and workspace components category, it is suited to establishing repeatable cable pass-through points in desks, shelving, and worktops. For projects calling for a 1-1/2 inch bore hole diameter and a finished matte black trim, this two-piece grommet provides an identified part number that supports consistent layout and appearance.
