Round Wire Grommets, 3/4" to 4" Bore Hole Two Piece Plastic - Doug Mockett And Company, Inc. XG3-93D

3 Flip-Top Grommet Desert Sand For Wire Pass-Through

3 flip-top grommet desert sand gives a clean wire pass-through point in work surfaces using Doug Mockett and Company, Inc. XG3-93D two-piece plastic construction. The round wire grommet design manages cables through a 3 inch bore hole, so wires route where needed while the opening stays organized. The flip-top cap with permanent cut out for wires lets cables stay in place while the cap closes over the opening, helping the work surface stay visually tidy during everyday use. Its desert sand finish coordinates with neutral-toned shelves, closets, or multimedia workstations, so the cut hole blends more closely with surrounding surfaces. As part of Doug Mockett round wire grommets from 3/4 inch to 4 inch bore hole sizes, this 3 inch version fits projects using that common opening size, giving installers a repeatable solution across multiple jobs.

Key Wire Grommet Details For Daily Use

• The two-piece plastic design with a grommet cap and hole liner lets the liner edge shield the cut bore hole, so the work surface edge stays protected from cable movement over time.
• The cap with permanent cut out for wires holds a defined cable opening, guiding cords through a consistent channel so cables stay grouped instead of spreading across the desktop.
• The round wire grommet style fits a 3 inch bore hole diameter, aligning with a standard drilled opening so installers can match their boring pattern to this specific XG3-93D part.
• The desert sand finish provides a neutral tone on the visible cap, helping the opening read as part of the surface instead of a stark contrast point in offices or closets.
• Availability across eight bore hole diameter sizes, from 3/4 inch to 4 inch, means this style can be used consistently where different opening sizes are required on the same project run.

Installation Fit For 3 Inch Bore Openings

This flip-top round wire grommet is specified for a 3 inch bore hole diameter, so installers can bore openings with a 3 inch hole saw and expect the XG3-93D to seat properly. The plastic hole liner drops into the bored opening, positioning against the cut edge so cables contact the smooth liner instead of raw substrate. The grommet cap then fits onto the liner, setting the desert sand finish at the surface where it meets the worktop or panel. Because this grommet belongs to a family covering 3/4 inch to 4 inch bore hole sizes, shops can match the opening size to the selected part number and keep boring operations standardized for repeat work.

Using This Round Wire Grommet In Projects

Where This Two Piece Plastic Grommet Fits Best

The Doug Mockett and Company, Inc. XG3-93D round wire grommet fits projects that call for routing cords through desks, countertops, or panels drilled with a 3 inch bore hole. In multimedia and workspace components, this size suits cable clusters for monitors, phones, and power strips passing through a single opening. In shelf, closet, and garage organization work, the two-piece plastic construction sits in vertical or horizontal panels to pass wiring for lighting or electronics through a controlled opening. Because the cap has a permanent cut out for wires, the field opening is already shaped for cable bundles, which reduces layout time when planning where cords will exit the surface. The desert sand finish visually supports light or neutral finishes often used in office, closet, or storage layouts.

Why XG3-93D Details Support Clean Wire Routing

The two-piece design with a grommet cap and hole liner on the XG3-93D separates cosmetic and functional roles, with the liner managing the interface to the 3 inch bore hole while the cap presents the desert sand finish at the surface. This structure means the liner can buffer cables as they move, while the cap maintains a defined opening and finished look. The cap's permanent cut out for wires keeps a fixed cable path, so once cords are routed, they return to the same exit point instead of shifting across the hole. As part of Doug Mockett round wire grommets offered from 3/4 inch to 4 inch bore hole diameters, this model aligns with standardized drilling schemes on casework or worktops, supporting consistent layouts across a job. When repeated on multiple panels, the matching finish and opening geometry help workstations or storage runs look uniform while still allowing practical cable access.

Common Questions About XG3-93D Wire Grommet Use

Selecting This 3 Flip-Top Grommet For Work

The Doug Mockett and Company, Inc. XG3-93D 3 inch flip-top round wire grommet combines a two-piece plastic cap and hole liner with a permanent wire cut out and desert sand finish. For desks, storage, or multimedia layouts that rely on a 3 inch bore hole diameter, this design routes cables through a defined opening while preserving a neat, neutral appearance at the surface. Choose this model when a 3 inch bore, controlled cable path, and desert sand color match the layout requirements on your next installation run.