Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
ice maker drip pan describes this Killarney Metals 144937 pan designed to sit under an ice maker and capture drips or minor leaks so water is contained in a defined area instead of spreading across surrounding surfaces or flooring. The 15 inch width focuses coverage directly beneath compact or undercounter ice makers where the footprint is relatively narrow, which helps keep the pan aligned with the unit base in tight utility, bar, or kitchen layouts. The 24 inch length provides front-to-back coverage to follow the depth of typical machines, so water shedding from lines or fittings lands in the pan across the full depth range. A 1-1/2 inch height gives the pan sidewalls enough depth to hold a meaningful volume of water, which matters when slow leaks develop over time. The stainless steel construction provides a rigid metal body for the drip pan, supporting the weight of the ice maker resting above normal shop or residential floor conditions.
This stainless steel ice maker drip pan is defined by its 15 inch width, 24 inch length, and 1-1/2 inch height, so installers can scale cabinetry openings, floor space, or support platforms around those fixed dimensions for a clean fit. The rectangular footprint allows the pan to be oriented so the longer 24 inch side follows the ice maker depth, which simplifies aligning the machine feet or stand over the containment area. The 1-1/2 inch sidewall height becomes the maximum rise above the mounting surface, allowing trim, toe kicks, or adjacent platforms to be detailed to that height for a flush visual line. Because the pan is constructed from stainless steel, it provides a solid base surface for the appliance, which supports consistent leveling efforts when adjusting the unit on shims or feet.
This 15 inch wide by 24 inch long ice maker drip pan fits applications where the ice maker footprint stays within those plan dimensions, such as narrow undercounter units or compact standalone machines in shops or service areas. The rectangular stainless steel pan can sit directly on finished floors, concrete, or built platforms, so installers can integrate it into bar bases, utility closets, or small equipment banks without reworking the floor shape. The 1-1/2 inch height lets the pan nest into low-height plinths or recesses, keeping the appliance elevation close to surrounding cabinetry or work surfaces while still defining a containment zone under the unit. Because the pan is part of Killarney Metals drip pans, it fits naturally into projects already using similar pans for other equipment, supporting uniform detailing across multiple locations.
The fixed 15 inch by 24 inch footprint gives clear layout numbers so rough carpentry, framing, or millwork can be cut before equipment arrives, reducing field modification once the ice maker is set. The 1-1/2 inch wall height creates a predictable edge elevation, so installers can plan transitions from the pan edge to adjacent flooring or platforms with less scribing. Stainless steel construction keeps the pan rigid under the ice maker weight, supporting accurate leveling because the surface under the appliance stays flat instead of flexing. The defined Killarney Metals 144937 part number lets project teams specify the same ice maker drip pan model for future builds or replacements, which streamlines ordering and keeps dimensions consistent when swapping units or rebuilding a station. The clear stainless ice maker drip pan identity also simplifies documentation on drawings or parts lists, improving communication between designers, installers, and maintenance staff.
The 144937 ice maker drip pan has a 15 inch width, 24 inch length, and 1-1/2 inch height, so installers can size floor space or platforms to those exact measurements.
This ice maker drip pan is stainless steel, giving the pan a rigid metal body that supports the appliance weight and provides a solid surface for leveling.
The 1-1/2 inch height creates sidewalls that hold collected water inside the pan, defining a containment depth that helps manage drips beneath the ice maker.
The 15 inch width suits ice makers with bases that fit within that span, keeping drips from edges inside the pan in tight undercounter or compact layouts.
A stainless steel ice maker drip pan provides a sturdy, flat surface under the unit, supporting stable positioning and helping the pan hold shape under equipment load.
The 24 inch length covers the front-to-back depth under typical ice makers, so installers can align the appliance and know drips from front or rear land in the pan.
The 15 inch by 24 inch by 1-1/2 inch stainless steel ice maker drip pan from Killarney Metals gives a clearly sized, rigid metal basin under your ice maker so drips collect in a controlled footprint. Those fixed dimensions support precise planning of floor area, cabinetry openings, or low platforms around the appliance position. The defined 144937 part number lets you repeat this same stainless steel ice maker drip pan across projects for consistent detailing wherever ice makers are installed. Use this pan when a 15 by 24 inch stainless containment area matches the ice maker base you are setting.