Ice maker drip pan performance matters wherever melting ice or line leaks can damage surrounding surfaces. This 15 inch wide by 24 inch long by 1 inch high ice maker drip pan from Killarney Metals defines a fixed catch zone, so water stays contained instead of spreading into adjacent equipment or flooring. The stainless steel construction provides a solid, non-absorbent surface that does not swell or soften when exposed to water, supporting consistent shape over repeated use. The low 1 inch height keeps the profile shallow, which helps the pan sit under low-clearance ice maker stands or carts while still providing depth for collecting runoff. As part of Wurth Baer Supply offerings in drip pans and shop and safety supplies, this pan fits into a protection strategy focused on managing nuisance water around equipment. The stated dimensions guide layout planning when positioning multiple pans in a row beneath ice makers.
This 15 inch wide by 24 inch long by 1 inch high ice maker drip pan installs as a passive catch surface placed under the ice maker or in the meltwater path. The rectangular footprint allows the pan to align with the machine base so that drips fall directly into the 24 inch long trench area. The low 1 inch height helps the pan sit beneath equipment frames where vertical clearance is limited, supporting placement under existing ice maker stands. Stainless steel construction keeps the pan form stable when it is slid in or out for cleaning, which supports repeatable repositioning without distorting the catch area. The stated dimensions also help align multiple KM-05504 pans side by side or end to end when a longer trench-style catch area is needed under several ice makers in a row.
The KM-05504 ice maker drip pan from Killarney Metals is sized for use where a 15 inch by 24 inch footprint matches the underside of an ice maker or the primary drip zone. In tight shop or equipment rooms, the 15 inch width lets the pan sit within narrow service corridors while still covering the area directly beneath the machine. The 24 inch length supports placement so that both the back edge under water lines and the front edge near access doors fall within the trench area. The 1 inch height keeps the pan profile compact, which can be important under low frames or bases that do not allow tall containment. As a stainless steel drip pan, this KM-05504 model fits environments where water exposure is expected around ice making equipment and a defined, rigid catch surface is needed to protect floors or adjacent assemblies.
The 15 inch width on this KM-05504 stainless steel ice maker pan helps installers predict side-to-side coverage, so they can center the pan under the ice maker and know that routine drips fall within the catch zone. The 24 inch length gives additional front-to-back tolerance, which is useful when the exact drip point varies between models or plumbing layouts but still falls within that 24 inch span. The 1 inch high trench depth establishes a controlled collection area without building excessive height, which allows the pan to function as an open front icemaker trench pan when positioned so water flows into the open end. Stainless steel construction keeps the pan walls and base aligned even after frequent handling, supporting repeatable placement and consistent protection over time. The clear KM-05504 identifier also lets teams document this specific drip pan in equipment standards, so replacements match the original footprint.
The ice maker drip pan measures 15 inches wide by 24 inches long by 1 inch high, which defines the coverage area available for catching meltwater beneath the ice maker.
The KM-05504 ice maker drip pan is stainless steel, providing a rigid, non-absorbent surface that tolerates ongoing water exposure in shop or equipment environments.
The 1 inch height keeps the pan profile low, allowing installers to slide it under ice maker stands where vertical clearance is limited while still retaining collected water.
The description open front icemaker trench pan 24IN, SS indicates a 24 inch long stainless trench-style pan intended to sit in the drip path at the front of an ice maker.
The defined 15 by 24 inch footprint allows planners to allocate floor space accurately and line up the pan under the expected meltwater path of the ice maker.
The KM-05504 part number uniquely identifies this Killarney Metals ice maker drip pan, making future reorders and documentation of standard pans straightforward.
Choose this 15 inch wide by 24 inch long by 1 inch high stainless steel ice maker drip pan when your layout calls for a compact, trench-style catch area beneath or in front of an ice maker. The stainless steel construction supports routine exposure to meltwater in shop and safety applications, while the fixed dimensions simplify planning around existing equipment footprints. The KM-05504 designation links the pan to a specific Killarney Metals design offered by Wurth Baer Supply, which helps standardize drip control across similar installations. Use the stated size and low profile to match this pan to ice maker bases that demand controlled, predictable spill collection.
Sold In: 1 Each