15"W x 24"L x 2"H Ice Maker Drip Pan, Flat Black | Killarney Metals 144940

Ice Maker Drip Pan For Targeted Spill Control

Ice maker drip pan describes this Killarney Metals pan designed to sit under ice-making equipment and catch water where it falls, helping keep the surrounding area drier during normal operation or minor leaks. The stated 15 inch width gives a compact footprint that suits tight spaces while still covering the base of many ice makers, supporting use in crowded shops or utility areas. The 24 inch length extends catch coverage along the depth of the unit, which matters when meltwater or condensation tends to travel toward the front or rear. The 2 inch height creates a defined wall around the perimeter, helping retain collected liquid on the pan until it is removed, which supports cleaner floors and less tracking. The flat black description identifies a neutral, low-visibility finish that blends with darker equipment and shop interiors, helping the pan sit visually in the background around work areas.

Practical Details That Support Shop Use

• The 15 inch width gives a modest side-to-side span that fits beneath ice makers set between cabinets or equipment, so installers can place it without needing extra lateral clearance.
• The 24 inch length offers front-to-back coverage under the machine footprint, providing a defined area to catch drips and condensation that might otherwise reach walkways or storage.
• The 2 inch height forms a continuous lip around the edges, creating a shallow basin that holds collected water, which helps contain small leaks until they can be dealt with in a controlled way.
• The flat black finish provides a dark, non-reflective surface that visually recedes under equipment, which suits shop, back-room, or utility settings where a low-profile look is preferred.
• Drip pan classification places this item within Wurth Baer Supply shop and safety supplies, aligning it with other products used to manage fluids and protect surrounding areas from moisture.

Dimensional Fit And Placement Around Ice Makers

The 15 inch width on this Killarney Metals drip pan lets installers center it under many compact ice makers, giving coverage to the base without extending far beyond adjacent gear. The 24 inch length helps position the front or rear edge where runoff tends to land, guiding where the machine sits relative to the pan. The 2 inch height defines how much vertical clearance is required under the unit, which matters when sliding the pan beneath equipment legs or framing. The flat black finish keeps the pan visually subdued once installed, so it can sit under or around machinery in work areas without drawing attention away from primary equipment.

Using This 15 x 24 Ice Maker Pan In Practice

Where This Killarney Metals Drip Pan Fits Best

This Killarney Metals drip pan is identified as an ice maker drip pan, so it is oriented toward sitting directly beneath ice-making equipment in shops, service rooms, or similar environments. The 15 inch width pairs with equipment bases in that general size range, supporting use where side clearances are modest but some catch area is still required. Its 24 inch length lets installers align the pan so that likely drip zones, such as the front service side or rear connections area, fall inside the basin. At 2 inches high, the sidewalls give depth without being overly tall, which helps when the pan needs to slide under low-framed units or rest on flat surfaces under equipment stands. The flat black appearance suits back-of-house, shop, or industrial-style interiors where a darker component around the floor line is preferred. Within Wurth Baer Supply offerings, the drip pan classification associates this unit with shop and safety supplies focused on managing fluids and helping protect nearby surfaces from moisture.

Why The 24 x 15 x 2 Size Supports Consistent Results

The specified 15 inch width, 24 inch length, and 2 inch height give repeatable reference numbers when planning around this ice maker drip pan, helping installers map floor layouts or casework cutouts to a known footprint. Using the 15 by 24 inch plan size, a layout can reserve enough area under an ice maker for the pan to sit flat, which helps keep the collection surface level for even liquid distribution. The 2 inch wall height defines a consistent basin depth, so expectations about how much water the pan can physically hold are tied directly to that dimension. Knowing the pan is described as flat black allows planners to coordinate it visually with black or dark equipment bases, leading to a more unified appearance along equipment lines or under counters. The manufacturer part number 144940 and description KL144940R DRAIN PAN, 24 X 15 X 2, BLK give a clear reference when specifying or reordering the same size and finish, which supports repeatable use across multiple installs or locations without guesswork around dimensions.

Key Questions About This Ice Maker Drip Pan

Select This Ice Maker Drip Pan For Defined Coverage

The Killarney Metals 144940 ice maker drip pan pairs a 15 inch width with a 24 inch length and 2 inch height to create a defined catch area under ice-making equipment. The flat black finish keeps the pan visually reserved in shop and back-room settings while it functions as a drip pan within Wurth Baer Supply shop and safety supplies. When a project calls for a clearly sized ice maker drip pan with a dark appearance and a 2 inch basin depth, this 15 by 24 inch unit offers a consistent, cataloged option tied to the 144940 part number.