Washer drain pan describes this Killarney Metals KM-04521 unit precisely, because it is built as a flat washer drip pan in galvanized steel. The 30 inch width gives a defined footprint for a typical washer area, which helps installers plan the floor layout in a laundry or utility space. The 32 inch length provides front-to-back coverage around the washer base, which matters when positioning hoses and connections behind the machine. The 2-1/2 inch height creates a low wall around the pan, which helps contain water from minor leaks so it stays on the pan rather than spreading onto adjacent flooring. The galvanized steel construction forms a rigid base under the washer, which supports straightforward placement on a solid, corrosion-resistant surface. Identified as a drip pan in the product class, this pan serves as a collection surface under equipment, which adds a defined layer of protection between the machine and the floor.
The 30 inch width of this Killarney Metals washer drain pan defines how it sits between side walls or cabinets, which is important when aligning the pan with surrounding casework or framing. The 32 inch length sets the front and rear edges, which helps installers position the pan so the washer door and service connections remain accessible. The 2-1/2 inch height of the sides creates a modest step up from the floor, which matters when leveling the washer and accounting for the added elevation in relation to adjacent finishes. Being listed as a floor washer drip pan in galvanized steel, it is suited to floor-mounted applications where a metal catch surface is desired under equipment. The rectangular shape implied by the 30 inch by 32 inch sizing supports straightforward orientation during layout work.
This washer drain pan is categorized under shop and safety supplies in the drip and drain pans group, which frames it as a practical component for managing water around equipment in work or utility areas. The 30 inch by 32 inch footprint works for locations where a defined washer area is planned, helping separate wet operations from adjacent storage or cabinetry. As a floor washer drip pan, it functions directly under the appliance, which keeps any minor leaks or drips collected on the galvanized steel surface instead of on the subfloor. The 2-1/2 inch height means the perimeter remains low enough for typical laundry layouts, which helps the pan integrate into finished spaces without creating an excessive step. The galvanized steel construction aligns with shop supply expectations, which suits environments where a metal, rigid surface under the washer is preferred.
The KM-04521 part number ties every dimension together - 30 inch width, 32 inch length, and 2-1/2 inch height - which simplifies repeat ordering when multiple washer locations must match across a project. The drip pan product class definition means this unit is intended to capture liquids, which gives trades a clear role for the pan in overall moisture control planning. Its listing as galvanized steel indicates a metal build, which provides a solid base that helps washers sit firmly during operation. The 30 inch width is narrow enough to work between typical framing or cabinetry layouts, which reduces layout conflicts in existing laundry rooms. The 32 inch length provides a slight extension beyond many washer footprints, which offers a buffer zone for water at the front or rear of the machine. Combined, these details give installers predictable dimensions and material characteristics that support consistent outcomes across residential or shop installations.
The Killarney Metals KM-04521 washer drain pan measures 30 inches wide, 32 inches long, and 2-1/2 inches high, which defines the coverage and elevation it provides under a washer.
This washer drip pan is made from galvanized steel, which gives the pan a rigid, metal surface suited to supporting a washer in shop or laundry environments.
The 2-1/2 inch height creates a low perimeter wall, which raises the washer slightly while helping contain water on the pan during normal drip or leak scenarios.
This product is listed under shop and safety supplies as a drip pan, which suits floor-mounted washer locations in laundry, utility, or workroom settings.
The 30 by 32 inch size offers a defined footprint that fits many washer areas, which helps allocate floor space while still giving some margin around the appliance base.
The KM-04521 part number uniquely identifies this 30 x 32 x 2-1/2 inch galvanized steel washer drain pan, which simplifies specification, reordering, and inventory tracking.
The 30 inch width, 32 inch length, and 2-1/2 inch height of this Killarney Metals KM-04521 washer drain pan give you clear dimensions to design around. The galvanized steel construction delivers a solid, drip-focused surface under the washer footprint. As a drip pan in the shop and safety supplies category, it provides a dedicated catch area beneath the appliance in laundry or utility spaces. For projects needing a predictable washer drain pan footprint with metal construction, this KM-04521 model from Killarney Metals supplied by Wurth Baer Supply offers a defined, repeatable choice.