Classic Series Wall Cabinets Brownstone describes a Dartmouth wall cabinet sized 27 inches wide, 12 inches deep, and 36 inches high, so it fits standard upper cabinet layouts while offering useful interior storage space above counters or work surfaces. The cabinet has two butt doors, which creates a full-width opening that simplifies loading larger items without a center stile interfering with access. Cabinet fronts are made from 3/4 inch solid maple wood, giving a solid face frame and doors that handle daily use in kitchens or work areas. Rails are pocket drilled and assembled with 1 1/4 inch screws for rugged durability, so the frame resists racking when the cabinet is hung and loaded. Side panels and bottom use 1/2 inch plywood with matching exterior laminate, glued and stapled in a 1/2 inch dado in the cabinet front frame, forming a solid box that supports regular wall mounting and ongoing use.
The Dartmouth 27 inch wide, 12 inch deep, 36 inch high wall cabinet size aligns with common upper cabinet runs, so it ties into standard wall elevations and typical over-counter clearances. The cabinet uses two butt doors across the width, providing a wide opening that helps when placing or removing larger stored items inside the 12 inch deep box. A half-depth adjustable shelf in 3/4 inch plywood allows storage levels to be set without blocking the full depth of the interior, leaving space for taller items near the back. The toekick dimension, at 4 1/2 inches high by 4 1/16 inches deep on standard cabinets, defines how this wall cabinet visually coordinates with matching base units that follow the same toekick profile in a run.
The Dartmouth wall cabinet measuring 27 inches wide, 12 inches deep, and 36 inches high is suited to installations that call for a standard-height upper, fitting well above base cabinets that use the 4 1/2 inch high by 4 1/16 inch deep toekick reference. Two butt doors span the 27 inch width, so the interior is accessed as one open compartment, useful where full-width reach is important across the 12 inch depth. Cabinet fronts made from 3/4 inch solid maple wood bring a solid face frame and door surface, which helps the cabinet stand up to frequent door operation in active kitchen or utility spaces. The half-depth adjustable 3/4 inch plywood shelf with bull-nosed, foil-covered front edge sits inside this opening, providing a strong surface that still leaves rear clearance for taller pieces, making the cabinet flexible for mixed-height contents. Together, these layout and material details support everyday wall-mounted storage needs.
Rails that are pocket drilled and assembled with 1 1/4 inch screws tie the 3/4 inch solid maple front frame together, helping the cabinet hold its alignment when fastened through the back during mounting. Side panels and the bottom, made from 1/2 inch plywood with matching exterior laminate, are glued and stapled into a 1/2 inch dado in the cabinet front frame, creating mechanical interlock and adhesive bond that help the box resist spreading under load. Back panels of vinyl-covered 1/2 inch plywood are glued and nailed into a 1/2 inch dado and stapled to both the hang rail and cabinet bottom, which braces the carcass and gives a solid plane for wall mounting. All-wood 3/4 inch corner blocks in every corner further stiffen the joints between sides, top, and bottom, so the cabinet maintains its shape when installed alongside other units. Self-locking 1/4 inch diameter shelf clips hold the 3/4 inch plywood shelf securely, supporting repeatable shelf positioning without drift between adjustments.
The cabinet is 27 inches wide, 12 inches deep, and 36 inches high, so it aligns with common upper cabinet layouts and provides a standard-height storage option above work surfaces.
The cabinet fronts are made from 3/4 inch solid maple wood, giving a solid face frame and doors that handle frequent opening and closing in kitchen or utility environments.
The cabinet uses 1/2 inch plywood side, bottom, and back panels set in 1/2 inch dados, glued, stapled, and nailed to the front frame, hang rail, and bottom to create a rigid box.
The cabinet has a half-depth adjustable shelf made of 3/4 inch plywood with a bull-nosed, foil-covered front edge, giving a strong, finished storage surface.
The shelf is supported by self-locking 1/4 inch diameter clips mounted on the cabinet sides, which grip the shelf and help keep it steady at the chosen height.
The toekick is 4 1/2 inches high by 4 1/16 inches deep on standard cabinets, so this wall unit coordinates visually with matching base cabinets using that same toekick profile.
The Wolf 3036488 Dartmouth wall cabinet brings a 27 inch wide, 12 inch deep, 36 inch high format that fits standard upper cabinet rows while pairing with base units using the 4 1/2 inch high by 4 1/16 inch deep toekick profile. Two butt doors over a 3/4 inch solid maple front frame give full-width access to the 1/2 inch plywood box, suited to everyday kitchen or workroom storage. With a half-depth adjustable 3/4 inch plywood shelf held by self-locking 1/4 inch clips, the interior adapts to different item heights. Select this model when a Classic Series Brownstone wall cabinet is needed to match Dartmouth fronts and typical wall elevations.
Sold In: 1 Each