Classic Series Wall Cabinets Brownstone defines a 24 inch wide, 12 inch deep, 36 inch high Dartmouth wall cabinet from The Wolf Organization, LLC that suits standard upper wall layouts. Two butt doors create a full-width opening so access across the cabinet interior stays clear for storing everyday items. Cabinet fronts are made from 3/4 inch solid maple wood, giving a solid door face that handles repeated use in a busy kitchen or work area. Rails are pocket drilled and assembled with 1 1/4 inch screws for rugged durability, so the face frame stays tight under the weight of contents over time. Side panels and the bottom use 1/2 inch plywood with matching exterior laminate, glued and stapled in a 1/2 inch dado in the cabinet front frame, creating a tied-in box structure that supports stable mounting and smooth alignment with adjacent units.
Side panels and bottom made from 1/2 inch plywood, glued and stapled in a 1/2 inch dado in the cabinet front frame, form a strong box that helps the cabinet sit flush and steady on the wall. Back panels use vinyl-covered 1/2 inch plywood on the inside, glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom, so the back ties directly into both the top hanging area and the lower structure. This back arrangement gives a solid surface for engaging wall fasteners through the cabinet and helps the cabinet carry stored weight once hung. All-wood 3/4 inch corner blocks in every corner further stiffen the case, which supports consistent alignment with neighboring cabinets and keeps the cabinet square during installation.
This Wolf Dartmouth Brownstone wall cabinet measures 24 inches wide, 12 inches deep, and 36 inches high, fitting common upper cabinet layouts where a 24 inch span is needed over counters or work surfaces. Two butt doors cover the full width, so when opened they give direct access across the interior without a center stile interrupting the reach. The cabinet uses a half-depth adjustable shelf of 3/4 inch plywood with bull-nosed, foil-covered front edges, which lets items placed toward the front be easily seen and reached while leaving space behind for additional storage. Two adjustable shelves supported by self-locking 1/4 inch diameter clips on the sides allow shelf heights to be set for specific contents, helping organize dishes, supplies, or food items inside the 36 inch tall box. Back panels made from vinyl-covered 1/2 inch plywood present a finished interior surface, supporting a clean look when the cabinet doors are open.
Cabinet fronts in 3/4 inch solid maple wood supply a stable frame and door structure, helping doors stay aligned so reveals look consistent across a run of cabinets. Rails that are pocket drilled and assembled with 1 1/4 inch screws form tight, reinforced joints between frame members, which helps the face frame resist loosening from door movement over time. Side panels and the bottom, built from 1/2 inch plywood with matching exterior laminate and set into a 1/2 inch dado, spread loads into the front frame and help keep the cabinet square, which is useful when lining up edges and face frames on a wall. All-wood 3/4 inch corner blocks installed on all corners add bracing, resisting racking forces during handling and hanging so the cabinet maintains its shape. The half-depth adjustable shelf of 3/4 inch plywood with a bull-nosed, foil-covered front edge combines solid shelf support with a front edge designed for repeated contact, which helps the leading edge stand up to daily loading. Self-locking 1/4 inch diameter clips on the sides hold the shelves in place, reducing shelf movement when items are moved on and off. A toekick 4 1/2 inches high by 4 1/16 inches deep on standard cabinets defines the base geometry for coordinating this wall cabinet with matching base units in the same line.
The cabinet is 24 inches wide, 12 inches deep, and 36 inches high, which fits standard upper cabinet layouts and helps coordinate with typical kitchen wall elevations.
Cabinet fronts are made from 3/4 inch solid maple wood, giving the frame and doors a solid, stable structure that handles frequent opening and closing.
Side panels and the bottom use 1/2 inch plywood with matching exterior laminate, glued and stapled into a 1/2 inch dado for a rigid cabinet box.
The half-depth adjustable shelf of 3/4 inch plywood is held by self-locking 1/4 inch diameter clips on the sides, which keep shelf positions secure during everyday use.
Back panels use vinyl-covered 1/2 inch plywood on the inside, glued and nailed in a 1/2 inch dado and stapled to the hang rail and cabinet bottom for added strength.
All-wood 3/4 inch corner blocks are installed on all corners, bracing the cabinet so it resists racking during handling and after wall installation.
This Classic Series Wall Cabinets Brownstone Dartmouth unit from The Wolf Organization, LLC pairs a 24 inch width with 36 inch height and 12 inch depth, giving a standard upper size to integrate into kitchen or workspace layouts. Two butt doors, two adjustable shelves, and a half-depth 3/4 inch plywood shelf with bull-nosed, foil-covered front edges support flexible storage across the cabinet height. With 3/4 inch solid maple cabinet fronts, 1/2 inch plywood case construction, vinyl-covered 1/2 inch plywood back panels, and all-wood 3/4 inch corner blocks, the cabinet offers a construction package suited to building consistent wall runs using the Wolf Home Products line under manufacturer part number 3036489.
Sold In: 1 Each