Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV Closet-PRO HD flange pair gives you one open and one closed flange designed for 1-5/16 inch diameter closet rods, so you can set up rod ends in a consistent, repeatable way across multiple openings. The Knape and Vogt steel construction provides a solid bearing surface for the rod, which supports smooth hanging performance when the closet is in daily use. The open flange lets you drop the rod in from the front, which speeds installation and simplifies future rod removal during layout changes. The closed flange captures the rod end, which helps position the rod in a fixed location for uniform spacing along a closet run. The satin black finish ties in with other dark closet hardware, so the flanges visually blend into modern rod and shelf layouts. Each pair is configured to support a single closet rod span with matching appearance at both ends.
The KV Closet-PRO HD flange pair is designed to mount at the ends of a 1-5/16 inch diameter closet rod, so installers can terminate rods neatly at side walls or panels. The steel material gives the mounting screws a solid base, which helps the installed rod resist everyday hanging loads once the flanges are fixed to wood or similar substrates. With one open and one closed flange in each pair, you can fasten the closed flange, slide the rod into position, then drop the opposite end into the open flange to finish the span without wrestling the rod past an obstruction. The satin black finish keeps the hardware visually consistent with other black closet shelf and rod brackets in the same area.
The KV Closet-PRO HD flange pair is built for 1-5/16 inch diameter closet rods, so it fits rod stock commonly used in residential closet shelf and rod layouts. By matching the rod size, the flanges cradle the tube closely, which helps keep rods from shifting at the ends during loading and unloading. The satin black finish ties into closet designs that use dark rods and brackets, supporting a uniform look from end supports to intermediate shelf and rod hardware. Within closet shelf and rod bracket projects, these flanges serve as the termination points at each end of a span, so panels and walls can carry the rod instead of freestanding supports. The design supports both new installations and replacements where an existing 1-5/16 inch rod setup needs updated flanges with a satin black appearance.
Each Closet-PRO HD flange pair combines one open flange and one closed flange, so installers can control both access and alignment at the rod ends. The closed flange provides a defined pocket for the rod, which helps keep the end pinned at a specific location once the flange is fixed to the mounting surface. The open flange lets the rod be lowered into place from the front, which simplifies setting a long rod in a tight closet where side access is limited. Because both pieces are made of steel, the flanges help transfer hanging forces into the mounting surface when properly fastened, supporting repeatable performance across multiple closet openings. The Knape and Vogt CD-0010-BK part number identifies this satin black, steel Closet-PRO HD flange configuration for consistent reordering on multi-closet jobs.
The KV Closet-PRO HD flange pair is designed for 1-5/16 inch diameter closet rods, so it matches a common rod size used in many closet installations.
The CD-0010-BK KV Closet-PRO HD flange pair is made of steel, which creates a rigid base for supporting the closet rod under typical hanging loads.
The KV Closet-PRO HD flange pair provides one closed flange to locate the rod end and one open flange to drop the rod in, which simplifies setting long rods in confined closets.
The Knape and Vogt Closet-PRO HD flange pair has a satin black finish, which coordinates with dark rods and trim in many closet systems.
The CD-0010-BK Closet-PRO HD flanges are packed as 6 pairs per box, providing 6 open flanges and 6 closed flanges for multiple rod spans.
The KV Closet-PRO HD flange pair suits closet shelf and rod bracket projects using 1-5/16 inch rods where a satin black, steel end support is desired.
The KV Closet-PRO HD flange pair in satin black gives you a steel, Knape and Vogt solution matched to 1-5/16 inch diameter closet rods. With one open and one closed flange in each pair, you can plan rod spans so ends are both accessible during installation and positively located in service. The satin black finish aligns with Closet-PRO HD components, which helps keep multi-rod projects visually consistent. Use the CD-0010-BK part to match existing Closet-PRO HD satin black flanges when adding or updating closet shelf and rod runs.
Sold In: 1 Pair