KV Closet-PRO HD flange pair is a Knape and Vogt steel flange set designed for 1-5/16 inch diameter closet rods, so it provides a defined, repeatable bearing point for hanging tubes in closet layouts. Each pair has one open and one closed flange, which lets the installer slide the rod into the open side and lock it at the closed side, speeding layout while still giving a positive stop. The chrome finish matches chrome 1-5/16 inch rods, so rod and flange present as a unified run in finished closets. As closet shelf and rod brackets, these flanges anchor the hanging tube directly to the supporting surface, giving an organized structure for hanging space wherever a 1-5/16 inch tube is specified.
These steel Closet-PRO HD flanges work as the end supports for 1-5/16 inch diameter closet rods, so they set the rod position on the wall or panel and define the hanging span. The open flange lets the installer swing or slide the rod into place after fasteners are set, which can simplify work in tight reach spaces. The closed flange acts as a fixed stop at the opposite end, so the rod seats consistently against a defined bearing surface every time. Because both pieces are chrome and built for the same rod diameter, the mounted rod aligns cleanly with the flanges, helping closet runs read straight and uniform from end to end.
The CD-0010-CH Closet-PRO HD flange pair is intended for use wherever a 1-5/16 inch diameter closet rod is part of the design, such as hanging sections below closet shelves or within organizational bays. As closet shelf and rod brackets, these steel flanges fasten directly to a vertical or horizontal surface to carry the end of the rod, so they suit framed closets, panel systems, and other structures that accept surface-mounted rod supports. The chrome finish aligns with chrome rods often used in residential and light commercial closets, allowing the flanges to sit visually in line with neighboring supports. By using one open and one closed flange, a closet run gains both a loading side and a fixed stop, which is useful when rods need to be removed seasonally or during interior adjustments without disturbing both ends.
Because the KV Closet-PRO HD flange pair is made of steel, each flange offers a solid bearing seat for the 1-5/16 inch diameter tube, supporting repeatable alignment when multiple sections are built in the same project. The specified 1-5/16 inch diameter match means the rod nests in a defined cradle rather than a loose opening, which helps maintain a straight hanging line through daily use. The pairing of one open and one closed flange standardizes the way each rod is captured: the closed end establishes the exact finished length, while the open end gives a consistent entry point. With a chrome finish over the steel body, these flanges coordinate with chrome closet rods from Knape and Vogt, helping installers deliver closet runs that look uniform from project to project while staying tied to a Closet-PRO HD component family.
The CD-0010-CH Closet-PRO HD flange pair is designed for 1-5/16 inch diameter closet rods, so it matches common heavy-duty tubing used in many closet layouts.
The KV Closet-PRO HD flange pair provides one open and one closed end, so the closed side fixes rod length while the open side lets the rod be set or removed from one direction.
The CD-0010-CH closet rod flanges are made of steel, giving a rigid mounting point that helps support and align the 1-5/16 inch diameter rod along the closet span.
The Closet-PRO HD flange pair is chrome, so it visually coordinates with chrome 1-5/16 inch closet rods and other chrome closet shelf and rod brackets in the system.
The CD-0010-CH Closet-PRO HD flange pair is manufactured by Knape and Vogt, aligning it with the broader Closet-PRO HD closet organization line.
As closet shelf and rod brackets, these steel flanges mount at the rod ends to carry a 1-5/16 inch tube, forming the hanging portion beneath a shelf or within a closet bay.
The KV Closet-PRO HD flange pair CD-0010-CH offers a steel, chrome-finished solution matched to 1-5/16 inch diameter closet rods, so it fits projects built around that tube size. With one open and one closed flange in each pair, installers gain a fixed stop and a loading side to set rods accurately. Sourcing this Closet-PRO HD component from Wurth Baer Supply keeps closet shelf and rod brackets tied to a consistent Knape and Vogt system across your closet runs.
Sold In: 1 Box