
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Sugatsune ESR-DC4513 drawer slides are 8 inch full extension ball bearing drawer slides that let the drawer travel its full length, helping installers deliver complete access to the cabinet interior. The slides are unhanded side mount units, so either slide can go on either side of the drawer, which simplifies layout and reduces sorting on the bench. Each slide is made of 304 stainless steel, giving resistance to moisture and everyday shop or jobsite environments. A hold-in detent built into the slide helps keep the drawer pulled shut at the end of travel, supporting clean alignment of drawer faces. The design uses ball bearings to guide movement, so drawers move with low friction and predictable feel. Sold in pairs, the ESR-DC4513-8 model supports building or repairing drawers where consistent travel and a stainless material are required.
The Sugatsune ESR-DC4513-8 drawer slide is side mounted, so it attaches to the cabinet side and drawer side, which fits standard side-mount construction in many cabinet shops. The manufacturer specifies mounting with M4 or #8 binding, pan, or truss head screws, so installers can match fastener type to their preferred screw style while keeping head geometry suited to the slide holes. Using those screw sizes helps seat the slide firmly without oversized heads interfering with drawer travel. Full extension travel means installers can pull the drawer fully out during fitting, which helps confirm clearances and alignment as the project is assembled.
The ESR-DC4513-8 full extension ball bearing slide fits cabinet or drawer layouts that call for an 8 inch slide length, which is common on small utility drawers or shallow compartments. Because it is a side mount slide, it works in constructions where drawer boxes are built with clearance along each side for the slide members. The 304 stainless steel construction suits installations where the slide may be exposed to humidity, such as utility spaces or work areas, while still supporting everyday cabinet use. Being unhanded, each slide in the pair can mount on either the left or right side, allowing installers to set up multiple drawers without sorting left- and right-hand parts during production.
The hold-in detent at the closed position is useful in drawers that are frequently bumped, such as small supply drawers, because it helps keep the drawer seated when it reaches the end of travel. Full extension operation lets users access the full drawer box, which is especially helpful in shallow drawers where every inch of internal depth contributes to usable storage. The ball bearing mechanism supports consistent motion along the slide length, giving drawers a steady feel from closed to fully extended.
The ESR-DC4513-8 model number identifies an 8 inch member in Sugatsune's ESR-DC4513 series, which helps shops standardize on a specific slide family across different drawer sizes. Mounting with M4 or #8 binding, pan, or truss head screws provides flexibility while keeping head styles that sit properly in the slide holes, which supports clean movement without interference. Side mount geometry means installers can use familiar jigs or spacers already set up for side-mounted drawers, supporting repeatable placement from cabinet to cabinet.
The full extension design lets installers check clearances across the entire opening range, from fully closed to fully open, reducing the chance that drawer fronts near adjacent components will rub during use. The unhanded design reduces the part count variants that need to be stocked, which helps keep assembly lines or jobsite installations moving when multiple drawers of the same style are required. With 304 stainless steel construction, these slides maintain material consistency across the pair, which supports a uniform look wherever the hardware is visible inside the cabinet.
The Sugatsune ESR-DC4513-8 is a full extension ball bearing side mount drawer slide, so the drawer travels its full length on ball bearings for controlled movement.
The ESR-DC4513-8 slides are made of 304 stainless steel, giving a corrosion-resistant material choice that suits environments with humidity or everyday moisture exposure.
The Sugatsune ESR-DC4513-8 drawer slides are 8 inch long, fitting smaller drawers or shallow cabinet depths where a compact slide length is required.
The ESR-DC4513-8 slides are designed for side mount installation, so they attach to the drawer sides and cabinet sides in standard side-mount drawer construction.
The ESR-DC4513-8 slides are mounted using M4 or #8 binding, pan, or truss head screws, which match the slide holes and support proper seating of the hardware.
The hold-in detent on the ESR-DC4513-8 helps keep the drawer closed at the end of travel, supporting neat drawer alignment during everyday use.
The Sugatsune ESR-DC4513 drawer slides in the ESR-DC4513-8 size combine 8 inch full extension travel, 304 stainless steel construction, and side mount installation, giving cabinet shops and serious DIY users a defined solution for compact drawers. The unhanded design, front disconnect feature, and use with M4 or #8 binding, pan, or truss head screws support efficient installation on repeated drawer runs. For projects that call for stainless material, a hold-in detent at closure, and full access to small drawers, these slides align well with focused cabinet work.
Sold In: 1 Each