concealed flat bracket 2 x 18 white describes a steel flat bracket from the Pro Value Series that supports countertops, work surfaces, floating shelves, standard shelves, ADA accessible installations, benches, and training room surfaces, so one bracket SKU can serve many project types. The 2 inch width, 18 inch depth, and 18 inch height size gives a substantial support profile for deeper shelves and tops without visible external structure, which suits installations where a clean look matters. Steel construction provides a rigid support arm for these applications, which helps the bracket handle typical loads in closet, countertop, and bench runs when laid out correctly. The textured powder coat finish in white creates a uniform appearance under tops and shelves, which blends visually with common light-colored casework and wall finishes in residential and commercial spaces.
Vertical and horizontal adjustability holes in the Pro Value Series concealed flat bracket let the installer shift the bracket slightly during mounting, which helps fine-tune height and projection when tying into existing framing. Square mounting holes that hold the bolt head in place mean the bolt stays captured in the bracket during tightening, which allows working from one accessible side with a single tool in tighter locations. Since all brackets attach to the right side of the stud, layout becomes repeatable from one stud to the next, which is useful on longer runs of countertops, standard shelves, or benches. The 18 inch depth dimension matches deeper surfaces such as work surfaces and some floating shelves, which gives better support coverage under the span and helps reduce unsupported overhang.
The Pro Value Series concealed flat bracket is specified for applications such as countertops, work surfaces, floating shelves, standard shelves, ADA accessible surfaces, benches, and training rooms, so it fits a wide range of commercial and residential build-outs. The 2 inch width keeps the support slim relative to the surface, which suits floating shelves and standard shelves where visual bulk needs to stay low while still offering a rigid support arm. At 18 inches deep and 18 inches high, the bracket can reach further under deeper countertops and benches, which spreads support more evenly along the underside of the surface. All brackets mounting to the right side of the stud creates a consistent orientation in wall framing, which simplifies laying out bracket spacing across long walls for shelving or training room worksurfaces. The textured powder coat white finish suits closets, garages, and office installations where white shelving or light laminate tops are used.
Square mounting holes on this concealed flat bracket are designed to lock the bolt in place, which prevents the bolt from spinning while tightening and allows the installer to work faster with a single tool on the nut side. This detail matters when brackets are being installed in a line for work surfaces or benches, because it reduces time spent holding bolt heads in tight stud spaces. Vertical and horizontal adjustability holes give small shifts in position during install, which help achieve straight, level runs of floating shelves or standard shelves even when studs are slightly out of position. Mounting specifically to the right side of each stud means every bracket references the same side of the framing member, which supports consistent reveals and alignment from bracket to bracket. The steel construction combined with the textured powder coat finish provides a robust, coated support component, which suits repeated use in garages, closets, ADA accessible installations, and training rooms.
The concealed flat bracket uses steel construction, which provides a rigid support arm for countertops, floating shelves, standard shelves, benches, and similar surfaces.
The bracket uses square mounting holes to lock the bolt head in place, so tightening can be done from one side with a single tool, speeding installation in tight spaces.
The concealed flat bracket has vertical and horizontal adjustability holes, which allow small shifts during mounting to align shelves, countertops, and work surfaces.
This concealed flat bracket is designed so all brackets attach to the right side of the stud, supporting consistent layout across multiple mounting points.
The Pro Value Series concealed flat bracket measures 2 inches wide, 18 inches deep, and 18 inches high, which suits deeper shelves, countertops, and benches.
The concealed flat bracket is specified for countertops, work surfaces, floating shelves, standard shelves, ADA accessible installations, benches, and training rooms.
The Pro Value Series concealed flat bracket in 2 inch by 18 inch by 18 inch sizing offers steel construction and a textured powder coat white finish, which suits visible yet discreet support beneath shelves and tops. Square mounting holes that hold bolt heads and vertical and horizontal adjustability holes give a practical mounting system for aligning countertops, standard shelves, and floating shelves to existing studs. With all brackets attaching to the right side of the stud and applications that span countertops, work surfaces, ADA accessible surfaces, benches, and training rooms, this concealed flat bracket fits projects where clean support and repeatable layout matter.
Sold In: 2 Each