Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
concealed flat bracket describes this steel support designed to carry shelves, countertops, work surfaces, and benches while staying hidden behind the structure. The 2 inch width, 24 inch depth, and 18 inch height give a compact footprint that still reaches deep into the surface, which helps distribute load along the wall stud. Steel construction provides a rigid support arm, so the surface stays stable under normal use in closets, garages, training rooms, or standard shelving runs where movement would cause problems. The white textured powder coat finish blends with light-colored surfaces, which keeps the hardware visually discreet while still easy to spot during layout and drilling. The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading.
The concealed flat bracket uses square mounting holes that lock the bolt head, so the installer only runs a socket or wrench on the nut side while the bracket stays aligned to the stud. Vertical and horizontal adjustability holes allow shifting the bracket up, down, or out to match shelf thickness and overhang, which helps achieve a straight line when several brackets support one long surface. Right-side stud attachment keeps the reference consistent, so measurements for bracket spacing and edge setbacks can be transferred directly from one wall or room to the next without reworking a new layout every time.
This Pro Value Series concealed flat bracket is built for fixed supports behind countertops, work surfaces, floating shelves, and standard shelves, so it fits cabinet shops, finish carpentry, and light commercial millwork. The 24 inch depth lets the support reach well into deeper counters or benches, which keeps the front edge from feeling soft when people lean on it. At 18 inches high, the vertical leg offers a tall fastening zone along the stud, which spreads the load over more fasteners and helps the assembly resist rotation under load. In closets, garages, and training rooms, this bracket works behind continuous shelves or desk-height tops where open space below is needed for storage or legroom while keeping the support fully concealed.
The steel construction of the concealed flat bracket provides predictable stiffness, which is important when several brackets must carry one straight countertop or work surface without uneven sag. Square mounting holes hold the bolt head against rotation, so tightening from one side pulls the bracket snug without needing a second hand on the bolt, which speeds up work when installing multiple brackets per run. Vertical and horizontal adjustability holes supply several positions to fine-tune bracket height and depth relative to the stud, which reduces the need to elongate field holes or notch materials after the fact. Right-side stud attachment defines a single reference face, so installers can measure off the same side of each stud for consistent reveals and cantilever, improving alignment from bracket to bracket. The white textured powder coat finish resists scuffs during handling and sliding into tight wall cavities, which helps the bracket maintain a clean appearance when portions remain visible near open shelving.
The concealed flat bracket measures 2 inches wide, 24 inches deep, and 18 inches high, giving a shallow wall footprint with a long support arm for deeper countertops, benches, and floating shelves.
The steel construction provides a rigid support arm, which helps keep countertops, work surfaces, and shelves stable under normal loads without relying on visible angle brackets.
The square mounting holes lock the bolt head in place, so tightening from the nut side holds the bracket against the stud and keeps alignment steady during fastening.
The vertical and horizontal adjustability holes offer alternate positions, which helps match bracket height and projection to the finished surface thickness and desired overhang.
The concealed flat bracket is intended for countertops, work surfaces, floating shelves, standard shelves, ADA accessible layouts, benches, and training rooms in residential or light commercial projects.
The bracket is supplied as a matched left-handed and right-handed pair per box, so installers can support both sides of a span with mirrored geometry for balanced loading.
This concealed flat bracket from the Pro Value Series combines steel construction, a 2 inch by 24 inch by 18 inch profile, and a white textured powder coat finish to serve countertops, work surfaces, floating shelves, benches, and ADA accessible layouts. Square mounting holes, vertical and horizontal adjustability, and right-side stud attachment support a consistent installation routine where each bracket lands in a predictable relationship to the stud and finished edge. For closet systems, garages, or training rooms that need clear space below while maintaining solid support, this bracket offers a concealed approach that aligns with common shelving and counter depths.
Sold In: 2 Each
