
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Vauth-Sagel VS ENVI 19-1/2 pullout is a top mount trash pullout designed to organize waste inside a cabinet while keeping the bins concealed and easy to reach. The unit is classified as a top mount trash pullout, so the carriage fastens to the cabinet interior from above, which supports a clean look at the opening. This model is built around two 31 quart waste bins, giving separated capacity in a single pullout for everyday kitchen or bath cabinet use. The pullout uses a carriage with lid and soft-close slides, so the bins move on runners rather than dragging on the cabinet floor, which helps preserve the cabinet surface during repeated use. As a Vauth-Sagel ENVI system, it is intended for fixed cabinet installation where a dedicated opening is available.
The ENVI 19-1/2 inch top mount waste pullout is specified with a minimum installation depth of 20.3125 inches, which sets the required cabinet interior depth so the runners can travel fully without the bins projecting past the face. A cabinet opening height of 20-1/2 inches is specified, which defines the vertical clearance needed at the opening so the mounted carriage and grey bins can slide without interference at the top rail. The unit uses integrated 3-D front adjustment, so the front can be adjusted in three directions on the hardware, which supports fine-tuning of the visible alignment relative to the cabinet door layout. As a top mount trash pullout, the assembly is intended to fasten to a suitable upper mounting surface inside the cabinet.
This 2-31 quart waste pullout fits cabinet openings that provide at least 20.3125 inches of depth and 20-1/2 inches of opening height, which aligns with common base cabinet interior dimensions in many kitchen layouts. The top mount trash pullout structure attaches at the upper interior, so it is suited to cabinets where a stable top section is available for mounting the carriage with lid and runners. The presence of two 31 quart grey bins makes this setup useful in projects that call for side-by-side waste separation, such as trash and recycling in residential kitchens or workroom cabinets. As part of the kitchen and bath cabinet accessories category, the VS ENVI configuration supports installations where pullout waste management is planned into the base cabinet run from the start. The cabinet opening requirements given for this model let installers match it to a cabinet before any cuts or modifications are laid out.
The integrated 3-D front adjustment built into this ENVI waste pullout allows the front to be adjusted on three axes, which gives installers room to refine overlay, reveal, and level so the pullout front lines up cleanly with adjacent fronts. Integrated soft-closing and self-closing action in both synchronized runners pull the system to the home position at the end of travel, which helps the front seat consistently and supports a uniform gap pattern across a row of cabinets. The EasyFit tool-free installation of the bin support onto the runners lets the support frame lock onto the slides without tools, which can shorten installation steps and keep bin support placement consistent across multiple units in a job. An integral installation template is built into the system, so hole positioning follows the template rather than separate layout marks, which supports repeatable mounting locations from cabinet to cabinet. Together with the specified minimum installation depth of 20.3125 inches and 20-1/2 inch cabinet opening height, these features help deliver predictable clearances and runner travel on every installation of this 90008897 waste pullout.
The 90008897 unit is a Vauth-Sagel VS ENVI 19-1/2 inch top mount trash pullout, so it mounts at the cabinet top and slides the two 31 quart bins out on runners.
The ENVI waste pullout requires a minimum installation depth of 20.3125 inches, which sets the interior cabinet depth needed for full slide travel without overextending the bins.
This trash pullout is designed for a cabinet opening height of 20-1/2 inches, giving the vertical clearance needed for the carriage, lid, and grey bins to move freely.
The integrated soft-closing and self-closing in both synchronized runners slow and pull in the pullout, which reduces impact on the cabinet face during daily use.
The integrated 3-D front adjustment allows three-direction front alignment, so the installer can fine-tune the pullout front position to match nearby cabinet doors and drawers.
The EasyFit tool-free installation lets the bin support attach to the runners without tools, which streamlines setup and keeps bin support positioning consistent from cabinet to cabinet.
This soft-close waste bin pullout combines a 19-1/2 inch top mount layout, two 31 quart grey bins, and integrated 3-D front adjustment to support precise cabinet work. When a project calls for a Vauth-Sagel VS ENVI 19-1/2 pullout that fits a 20.3125 inch depth and 20-1/2 inch opening height, this 90008897 waste pullout offers a defined option to match that cabinet opening and keep waste management on a planned track.
Sold In: 1 Kit
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Kit | WWENVIS131FF15CSG Mfr# 10090008899 | Vauth-Sagel VS ENVI 13-1/2" 1-31 Quart Top-Mount Waste Pullout with Grey Bin and Soft-Close Slides, 90008899 | ||||
Sold in: 1 Kit | WWENVIS131FL15CSG Mfr# 10090008895 | Vauth-Sagel VS ENVI 13-1/2" 1-31 Quart Top-Mount Waste Pullout with Platinum Bin and Soft-Close Slides, 90008895 | ||||
Sold in: 1 Kit | WWENVIS231FF24CSG Mfr# 10090008902 | Vauth-Sagel VS ENVI 21" 3-35 Quart Top-Mount Waste Pullout with Grey Bins and Soft-Close Slides, 90008902 | ||||
Sold in: 1 Kit | WWENVIS231FL24CSG Mfr# 10090008898 | Vauth-Sagel VS ENVI 22-1/2" 3-31 Quart Top-Mount Waste Pullout with Grey Bins and Soft-Close Slides, 90008898 |