Vauth-Sagel VS ENVI 13-1/2" 1-31 Quart Top-Mount Waste Pullout with Platinum Bin and Soft-Close Slides, 90008895

Vauth-Sagel VS ENVI Waste Pullout For Cabinets

Vauth-Sagel VS ENVI waste pullout is a top mount trash pullout designed to organize a single 31 quart bin in a cabinet opening. The top mount carriage supports the bin and lid from above, so the pullout tracks straight with the cabinet runners for consistent motion. An integrated cam shaft gives 3-D front adjustment, so the installer can fine-tune the front alignment in height, side-to-side, and depth to match the cabinet face. Integrated soft-closing and self-closing in both synchronized runners control the closing speed and pull the unit fully shut, which helps keep the bin position repeatable inside the cabinet. The system is part of the ENVI SPACE line, so it is built as a dedicated trash pull-out for kitchen or bath cabinet applications where a concealed waste solution is needed inside a standard opening.

Key ENVI Waste Pullout Details For Installers

• The top mount trash pullout design mounts the carriage to the cabinet interior from above, which helps use the existing cabinet sides and top rail as a fixed reference during installation.
• The 31 quart capacity stated for the main waste bin defines the approximate volume of waste that can be managed in a single pullout bay, which helps plan cabinet layouts around expected trash volume.
• The integrated cam shaft with 3-D front adjustment built into the system allows the front to be adjusted after mounting, which supports clean alignment with adjacent doors and drawer fronts.
• The integrated soft-closing and self-closing functions on the synchronized runners manage the closing stroke, which reduces slamming at the face and helps the unit return fully into the cabinet opening.
• The EasyFit tool-free installation of the bin support onto the runners lets the support frame snap onto the slides, which speeds field assembly when fitting the pullout into a prepared cabinet.
• The integral installation template provides a layout reference for fixing points, which removes field measuring steps when positioning the slide hardware in the cabinet interior.

Top Mount Trash Pullout Fit And Sizing

This top mount trash pullout is specified with a minimum installation depth of 20.3125 inches, which sets the cabinet interior depth required so the synchronized runners can travel their full stroke without interference. The cabinet opening height is listed at 20-1/2 inches, which defines the vertical clearance needed to accommodate the carriage, lid, and bin assembly within the face frame or frameless opening. The product is in the top mount trash pullouts class, so it is intended to mount from the upper area of the cabinet rather than from the floor, guiding installers toward suitable cabinet constructions. The system uses a single 31 quart trash bin as the primary container, which focuses this unit on one-bay trash management where a straightforward pull-out waste solution is preferred.

Using This ENVI Waste Pullout In Cabinet Projects

Where This Top Mount Trash Pullout Works Best

This cabinet trash pull-out system is categorized under kitchen and bath cabinet accessories, which positions it for use inside base cabinets in those rooms where concealed waste handling is required. The top mount trash pullout configuration connects the carriage to the cabinet structure near the top, which suits cabinets with solid tops or rails that can support overhead mounting. With a 31 quart capacity for the main bin, the pullout serves everyday household or light commercial trash applications in a single compartment, making it suitable when one container is sufficient for the work zone. The specified cabinet opening height of 20-1/2 inches defines the vertical space the assembly occupies, which works well in base cabinets where the opening can accommodate the full bin height and the operating lid.

Installation Details That Support Consistent Results

The integrated cam shaft 3-D front adjustment built into this Vauth-Sagel system lets the installer adjust the front position in three directions, which helps match adjacent fronts and reduce time spent repositioning the hardware. Integrated soft-closing and self-closing functions on the synchronized runners handle the last portion of travel, which reduces impact loads on the cabinet and keeps the pullout seated in a consistent closed position. The EasyFit tool-free installation of the bin support onto the runners eliminates fasteners in that step, which can shorten installation time and allows quick removal of the support for cabinet work. The integral installation template built into the product provides a reference for drilling or fastening locations, which standardizes hole placement and helps achieve repeatable runner alignment across multiple cabinets. The carbon steel gray finish on key components defines the material and surface color, which matches projects that call for a neutral gray interior hardware appearance in the cabinet.

Common Questions About This ENVI Trash Pullout

Selecting This ENVI Pullout For Your Cabinet Run

This Vauth-Sagel VS ENVI 13-1/2 inch top mount trash pullout combines a 31 quart bin, integrated cam shaft 3-D front adjustment, and soft-closing synchronized runners to serve as a dedicated cabinet trash pull-out system. The specified minimum installation depth of 20.3125 inches and cabinet opening height of 20-1/2 inches define the cabinet space requirements, guiding cabinet selection where this unit will be installed. The EasyFit tool-free bin support installation and integral installation template simplify on-site work, supporting a consistent setup process when outfitting multiple kitchen or bath bases. For projects that call for a carbon steel gray finish on interior cabinet hardware, this ENVI waste pullout offers a color and material combination aligned with that requirement.