Vauth-Sagel VS ENVI 15" 2-31 Quart Top-Mount Waste Pullout Bin Soft-Close Slides, Carbon Steel Gray, 90008900

Top-Mount Waste Pullout for a 15-Inch Face-Frame Base Cabinet

This Vauth-Sagel VS ENVI Space waste pullout mounts above the slide rather than below it, routing the soft-close hardware to the cabinet top so both grey bins stay fully accessible from the front of a 15-inch face-frame base cabinet.

Key Features

• Top-mount slide design keeps the bottom of the cabinet clear and puts the hardware out of the way above the bins.
• Two 31-quart grey bins give enough capacity to separate a day's trash and recycling in one pull.
• Soft-close slides control the closing motion so the loaded carriage eases shut instead of slamming.
• Full-extension travel rolls both bins fully clear of the cabinet opening for unobstructed access.
• Door-mount compatible so the unit rolls out when the cabinet door is pulled, with no separate handle needed.
• Fits a 15-inch minimum opening in face-frame cabinet construction.

Why Top-Mount Changes the Cabinet

A standard bottom-mount waste pullout places the slide hardware on the cabinet floor, which raises the bins and cuts into usable bin depth. A top-mount configuration flips that arrangement: the slide rides at the top of the cabinet opening, so the bins hang down and use the full interior height. In a 15-inch base cabinet where width is already the constraint, recovering that vertical space means each 31-quart bin can carry a meaningful load. The full-extension travel brings both bins out past the cabinet face so the back of each bin is as reachable as the front.

Grey Bins, Soft-Close Slides, and ENVI Space Build

The two bins are 31 quarts each in grey, a neutral finish that reads cleanly against most cabinet interiors. The soft-close slide mechanism is built into the top-mount hardware, so the damping is part of the carriage rather than an add-on. When a loaded carriage is pushed back, the soft-close takes over before the close and guides it shut quietly. The unit is sized for face-frame cabinets and requires a minimum cabinet opening of 15 inches wide, 20-1/2 inches high, and 20-5/16 inches deep.

Where This Unit Belongs

This pullout is well matched to a kitchen layout where a narrow base cabinet is the only available spot for waste and recycling, and where the cabinet construction is face-frame. The top-mount design is also a practical choice in a run where the adjacent cabinets carry bottom-mounted hardware and keeping the floor of this cabinet clear is a priority. Designers specifying a whole kitchen can use this unit to solve the 15-inch waste-cabinet problem without giving up bin volume. Cabinet shops building face-frame runs to spec will find the minimum opening dimensions precise enough to work from directly.

Common Questions

Waste and Recycling, Solved in One Narrow Cabinet

This top-mount configuration puts two full-size grey bins into a 15-inch face-frame base cabinet, with soft-close slides and full extension, so a tight kitchen run handles both trash and recycling without giving up floor space or bin volume.