Vauth-Sagel VS ENVI 18" 2-31 Quart Top-Mount Waste Pullout Bin Soft-Close Slides, Carbon Steel Gray, 90008901

Vauth-Sagel VS ENVI 18 Top-Mount Waste Pullout

Vauth-Sagel VS ENVI 18 top-mount waste pullout is a cabinet-mounted trash solution that uses two 31 quart waste bins to organize waste inside the cabinet opening, which helps keep the work area clear while maintaining usable capacity in an 18 inch cabinet. The top-mount carriage positions the system from the cabinet top, which stabilizes the pullout in use and helps the bins track squarely during opening and closing. This model uses integrated soft-closing and self-closing in both synchronized runners, which pulls the unit smoothly into the cabinet and reduces slamming at the end of travel during daily operation. The system is designed for a cabinet opening height of 20-1/2 inches and a minimum installation depth of 20.3125 inches, so installers can plan cabinet layouts and clearances around those fixed dimensions. Carbon steel gray finish on the components provides a uniform appearance that coordinates with the grey bins inside typical kitchen or bath cabinets.

Job-Focused Details Of This Waste Pullout

• The two 31 quart waste bins create a defined pair of containers, which supports separating trash streams while still using a single cabinet opening in busy kitchen or bath layouts.
• The integrated soft-closing and self-closing action in both synchronized runners controls the closing speed, which improves day-to-day handling and reduces impact on the cabinet face.
• The top-mount carriage design locates the pullout from the cabinet top, which helps keep the frame rigid and maintains alignment of the bins as they slide in and out under load.
• The carbon steel gray finish provides a consistent gray appearance, which visually matches the grey bins and helps the installation blend with modern cabinet interiors.
• The system is built for a minimum installation depth of 20.3125 inches and a cabinet opening height of 20-1/2 inches, which sets clear conditions for where the pullout can be integrated.

Installation And Fit Details For Cabinet Use

The ENVI SPACE configuration is designed as a top mount trash pullout, so it fixes directly to the cabinet interior at the top, which supports a rigid frame for consistent slide action. Integrated 3-D front adjustment is built into the design, which allows the installer to fine-tune front alignment in three directions so the pullout face can be adjusted relative to the cabinet opening after mounting. The EasyFit tool-free installation of the bin support onto the runners allows the bin frame to be attached without tools, which simplifies on-site assembly steps during cabinet installation. An integral installation template is part of the system, which removes layout measuring steps when positioning the runners inside the cabinet opening for this model. The unit is specified for a cabinet opening height of 20-1/2 inches and a minimum installation depth of 20.3125 inches, which defines where the top-mount pullout will operate correctly inside a cabinet run.

Using This 2-31 Quart Top-Mount Waste System

Where This Vauth-Sagel Waste Pullout Fits Best

This Vauth-Sagel VS ENVI 18 top-mount waste pullout is part of the top mount trash pullouts category, which aligns it with cabinet installations where the frame is supported from above the bins inside the cabinet. The system is designed around a cabinet opening height of 20-1/2 inches, which suits base cabinets that provide that vertical clearance from the bottom to the lower edge of the face frame or front. A minimum installation depth of 20.3125 inches means the pullout is suited to cabinet boxes that can accommodate that depth, which fits many standard-depth kitchen and bath base cabinets. Two 31 quart grey waste bins define the internal capacity, which suits applications needing two medium-capacity containers inside an 18 inch cabinet location. The carbon steel gray finish with matching grey bins supports use in contemporary or utility cabinet interiors where a gray interior component is preferred over contrasting colors.

Details That Support Consistent Operation And Results

The integrated soft-closing and self-closing in both synchronized runners directly influences daily operation, because the pullout is drawn into the cabinet smoothly and closed consistently at the end of travel. Synchronized runners guide the frame evenly on both sides, which helps keep the bins level as they move and supports repeatable slide performance over the full extension. Integrated 3-D front adjustment provides adjustment capability at the front, which lets the installer align the front relative to the cabinet so gaps and reveals can be corrected after the hardware is fixed. EasyFit tool-free installation of the bin support onto the runners matters during cabinet assembly, as the bin support can be engaged or removed without separate tools, which simplifies fitting in tight or busy jobsite conditions. The integral installation template built into the system eliminates separate measuring when locating runner positions, which reduces layout time and supports repeat placement of this 90008901 Vauth-Sagel waste system across multiple cabinets on the same project.

Common Questions About The VS ENVI Waste Pullout

Selecting This ENVI 18 Waste Pullout For Your Cabinet

The Vauth-Sagel VS ENVI 18 top-mount waste pullout with two 31 quart grey bins, soft-closing synchronized runners, integrated 3-D front adjustment, and EasyFit tool-free bin support provides a defined solution for 20-1/2 inch high cabinet openings with 20.3125 inch minimum depth. The carbon steel gray finish, integrated installation template, and 90008901 configuration give installers a specific, repeatable layout for trash management inside an 18 inch cabinet. For projects where a top mount trash pullout with matched grey bins, controlled closing, and clear cabinet dimension requirements is needed, this ENVI SPACE system aligns with that role.