Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
24 inch aluminum counter support bracket from the Pro Value Series provides strong, unobtrusive support for countertops, work surfaces, and heavy-duty wall-mounted shelving, so spans stay solid while leaving knee space open beneath. The one-piece design for strength and stability keeps deflection down under load, which matters when you are hanging stone, solid surface, or thick wood tops off a wall. When attached to wall framing per manufacturer recommendations, each bracket supports up to 450 lbs, giving you a high-capacity solution for long runs or deep tops in workstations and custom counters. Surface mounting after wall finishes allows brackets to be set late in the schedule, so layout can follow final cabinet and top conditions without reworking rough framing. The powder coat white finish blends with light-colored walls and casework, helping the hardware disappear visually in offices, shops, and residential spaces.
The AL-1824-E51 bracket is easily surface-mounted after wall finishes, so installation can happen after drywall, paint, or paneling, aligning the support directly to cabinets or layout lines. This timing allows installers to set bracket positions based on final field conditions, reducing guesswork from rough measurements. When attached to wall framing per manufacturer recommendations, each bracket supports up to 450 lbs, providing high-capacity support through the finished wall into the structure. With proper coordination of vertical framing member locations, additional in-wall blocking may be avoided, simplifying the wall build while still delivering solid anchoring points. Supports a wide variety of surface sizes with up to a 7 in. overhang, so the installation can accommodate deeper tops or bar edges without adding legs at the outer edge.
This Pro Value Series workstation and countertop bracket is designed to provide strong, unobtrusive support for countertops, work surfaces, and heavy-duty wall-mounted shelving, so it fits into shops, garages, offices, and residential projects where clear space under the surface is needed. The one-piece design for strength and stability creates a rigid arm that carries tops and shelves back to the wall framing, which is important when you are using heavier materials or longer spans. Supports a wide variety of surface sizes with up to a 7 in. overhang, so it adapts to standard-depth counters as well as modest bar or desk projections without separate front posts. When attached to wall framing per manufacturer recommendations, each bracket supports up to 450 lbs, letting you handle dense materials, equipment, or storage loads along the wall line.
The aluminum construction provides a light but strong bracket body, making handling easier during layout while still delivering the specified load capacity when fastened to framing. Aluminum material with a percentage of pre-consumer and post-consumer recycled content available from the manufacturer aligns the bracket with projects that track recycled content as part of their documentation. The powder coat white finish gives a clean, uniform surface that visually matches many painted walls and casework, which helps finished installations look intentional rather than improvised. Low-emitting material powder coating meets LEED v4 low-emitting materials requirements, so the finish suits projects that follow LEED v4 criteria and need supporting information on coatings. Because the bracket is easily surface-mounted after wall finishes, installers can repeat the same sequence from job to job, helping maintain consistent heights, spacing, and edge alignment along multiple bays or rooms.
The AL-1824-E51 aluminum bracket provides strong, unobtrusive support for countertops, work surfaces, and heavy-duty wall-mounted shelving, so it carries surface loads back to the wall framing.
Each bracket supports up to 450 lbs when attached to wall framing per manufacturer recommendations, allowing substantial countertop or shelving loads along a wall run.
The bracket is easily surface-mounted after wall finishes, so installation occurs once drywall or other finishes are in place and layout lines are visible.
The bracket supports a wide variety of surface sizes with up to a 7 in. overhang, helping stabilize extended edges on counters, desks, or shelving runs.
The aluminum material has recycled content available from the manufacturer, and the powder coating meets LEED v4 low-emitting materials requirements for coatings.
With proper coordination of vertical framing member locations, additional in-wall blocking may be avoided, streamlining framing while still providing structure for the brackets.
The 24 inch aluminum counter support bracket in powder coat white from the Pro Value Series combines a one-piece design for strength and stability with surface-mounted installation after wall finishes, giving you a straightforward way to support countertops, work surfaces, and heavy-duty wall-mounted shelving up to a 7 in. overhang. With each bracket supporting up to 450 lbs when attached to wall framing per manufacturer recommendations, and powder coating that meets LEED v4 low-emitting materials requirements, it fits both performance-driven and documentation-heavy projects.
Sold In: 2 Each
