Pro Value dull brass closet rod shelf bracket supports a round closet rod up to 1-5/16 inch in diameter, so the same bracket carries both hanging space and shelving in one piece of hardware. The bracket is designed for shelf material up to 14 inches deep, which lets you run a standard-depth upper shelf directly over the rod for efficient vertical storage. A rod fixing hole is built into the bracket, so the rod can be secured through the bracket to resist movement during daily use. The bracket uses 3mm thick steel, giving a rigid support body that helps the rod and shelf stay stable under load. Overall size is 1 inch wide by 12-3/8 inches deep by 10-7/8 inches high, so the geometry lines up a typical shelf depth with the hanging rod below. The rated load capacity is 110 lbs., giving a clear load guideline when planning closet layout.
The bracket depth of 12-3/8 inches positions the support under a shelf up to 14 inches deep, so the steel arm sits close to the front edge while still supporting most of the shelf. The height of 10-7/8 inches gives vertical separation between the mounting point and rod centerline, so hanging space clears the underside of the shelf. The width of 1 inch concentrates the bracket into a narrow footprint, allowing multiple brackets to be used along a wall without taking extra lateral space. Support for a 1-5/16 inch round rod and 110 lb load capacity per bracket combine to give a clear basis for planning closet sections where both shelf and rod must be carried on the same support.
This Pro Value Series closet shelf and rod bracket is designed as a combined support for a round closet rod up to 1-5/16 inch diameter and a shelf up to 14 inches deep, so it fits applications where a single bracket must carry both elements. The 12-3/8 inch overall depth works with typical closet shelf dimensions, so the bracket can sit under common board or panel depths while supporting the front area that carries much of the load. With a 110 lb load capacity, each bracket can serve in closet runs where garment weight, bins, or folded items need a defined structural rating. The dull brass finish aligns with the SAP description of dull brass, so it can match other dull brass closet hardware in the same installation.
The 3mm thick steel body provides a robust base for repetitive use along long closet runs, so each bracket behaves similarly under load when spaced according to the 110 lb capacity. The dedicated rod fixing hole standardizes how the round rod up to 1-5/16 inch is secured, leading to consistent rod alignment and reduced shifting when installing multiple brackets in sequence. Overall dimensions of 1 inch wide by 12-3/8 inches deep by 10-7/8 inches high give repeatable geometry, so bracket positioning can be laid out once and then transferred across multiple sections or projects. Identification as manufacturer part 72535 47 179 ties this exact dull brass, 3mm steel, 110 lb capacity bracket to project documents, simplifying reorders and matching during future closet expansions.
The Pro Value dull brass closet rod shelf bracket supports a round closet rod up to 1-5/16 inch (34mm) diameter, so standard round rods in that size range can be used.
The closet shelf and rod bracket is designed for shelf material up to 14 inches deep, allowing a typical closet shelf to sit securely over the rod support.
The Pro Value Series bracket has a load capacity of 110 lbs., providing a defined weight rating per bracket when planning closet storage runs.
The closet rod shelf bracket measures 1 inch wide by 12-3/8 inches deep by 10-7/8 inches high, giving clear sizing for layout and spacing along the wall.
The closet shelf and rod bracket is made from 3mm thick steel in a dull brass finish, providing a sturdy metal support with a dull brass appearance.
The manufacturer part number is 72535 47 179, which identifies this specific dull brass, 1-5/16 inch rod, 110 lb capacity closet bracket.
The Pro Value dull brass closet rod shelf bracket combines support for a 1-5/16 inch round rod, shelf material up to 14 inches deep, and a 110 lb load capacity, so a single steel bracket carries both hanging and shelf loads along a closet wall. The 3mm steel construction and defined overall dimensions of 1 inch by 12-3/8 inches by 10-7/8 inches create repeatable geometry from one bracket to the next. For projects calling for Pro Value Series dull brass closet shelf and rod brackets, this 72535 47 179 model aligns hanging space and shelving on the same support line.
Sold In: 1 Each