Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Pro Value closet rod and shelf bracket supports a round closet rod up to 1-5/16 inch (34mm) diameter while carrying a shelf above, so one steel bracket handles both hanging space and shelving in a single run. The bracket is made from 3mm thick steel, which provides a rigid support structure that resists bending under everyday closet loads. Its overall size of 1 inch wide x 12-3/8 inch deep x 10-7/8 inch high sets a defined geometry, so installers can lay out closets with consistent rod height and shelf depth. The design includes a rod fixing hole at the front, so the rod can be mechanically secured to the bracket, which helps prevent the rod from shifting when hangers are moved. A stated load capacity of 110 lbs allows the bracket to support substantial hanging weight and shelf contents when laid out appropriately across a closet wall.
The 12-3/8 inch depth of this dull chrome closet rod and shelf bracket positions the shelf arm to support shelf material up to 14 inches deep, so the front edge of the shelf stays well supported. The 10-7/8 inch overall height defines the vertical distance from the lower mounting area up toward the shelf level, which helps installers plan rod clearance under the shelf. With a width of 1 inch, the bracket presents a narrow profile at the wall while still carrying load through its 3mm steel thickness. The round-rod support sized up to 1-5/16 inch diameter aligns the hanging tube at a fixed point relative to the shelf, which keeps garment clearance consistent along the length of the closet.
This Pro Value Series closet shelf and rod bracket fits projects where a round rod and shelf need to share the same support, because it is specifically designed to hold a round closet rod sized up to 1-5/16 inch diameter with a shelf above. In closet runs using shelf material up to 14 inches deep, the 12-3/8 inch deep arm carries the shelf so its load transfers directly into the 3mm steel structure. The overall height of 10-7/8 inches provides room to set a practical gap between rod and shelf within that dimension, which supports hanging garments while leaving usable shelf space above. With its 110 lb load capacity, this steel bracket suits closets expected to carry substantial hanging weight and shelf contents within that rating. The dull chrome finish described in the SAP text aligns with typical closet hardware aesthetics where a neutral metal look is preferred.
The 3mm thickness steel used in this bracket gives a consistent structural section from piece to piece, which helps installers achieve repeatable load performance along a closet wall using the same part number 72535 48 180. The round rod support up to 1-5/16 inch diameter sets a defined interface with the hanging tube, so when that rod size is used, contact is positive and the rod seats firmly in the bracket cradle. The rod fixing hole offers a dedicated fastening point to lock the rod in place, which helps maintain alignment and prevents creeping over time as hangers are moved. The 1 inch width and 12-3/8 inch depth create a recurring footprint on the wall and under the shelf, simplifying layout when multiple brackets are spaced along a run. Rated 110 lbs load capacity provides a known performance figure, so projects using this dull chrome closet rod and shelf bracket can be designed around that value for consistent everyday service.
This Pro Value closet rod and shelf bracket is designed to support a round closet rod sized up to 1-5/16 inch (34mm) diameter, so it matches common round rod used in many closets.
This closet shelf and rod bracket supports shelf material up to 14 inches deep, so standard closet shelves can rest fully on the 12-3/8 inch deep arm for stable support.
This bracket has a load capacity of 110 lbs, which allows it to carry combined hanging garments and shelf contents within that rating when spaced appropriately.
The bracket measures 1 inch wide x 12-3/8 inch deep x 10-7/8 inch high, giving a defined footprint for laying out rod height and shelf depth in a closet installation.
This dull chrome closet rod and shelf bracket is made from 3mm thickness steel, providing a rigid structure that supports closet loads in normal use.
The rod fixing hole lets the round closet rod be fastened to the bracket, which helps keep the rod from shifting when hangers slide or when the rod is loaded.
This Pro Value Series steel closet rod and shelf bracket brings the rod support and shelf arm into one 3mm thick component, so hanging and shelving loads work through a single, defined structure. With capacity for a round rod up to 1-5/16 inch diameter and shelf material up to 14 inches deep, it aligns with common closet dimensions. The 110 lb load capacity and 1 inch x 12-3/8 inch x 10-7/8 inch overall size provide concrete values to plan around. Select this dull chrome closet rod and shelf bracket when a unified support for hanging space and shelving is required in your next closet layout.
Sold In: 1 Each