Pro Value closet rod and shelf brackets dull brass

Pro Value Closet Rod And Shelf Brackets For Combined Support

Pro Value closet rod and shelf brackets give you a single steel component to carry both an oval closet rod and an overhead shelf, which simplifies layout when you want hanging space and storage in the same vertical bay. The bracket is designed to support an oval closet rod sized 1-1/8 inch by 5/8 inch, so it matches common 30mm by 15mm oval rods for consistent fit along the run. Shelf material up to 14 inches deep is supported by the 11-3/4 inch bracket projection, giving you usable storage depth while holding the rod directly beneath. The steel construction in 3mm thickness provides a rigid support arm, helping the assembly resist flex under everyday closet loads. An overall size of 1 inch wide by 11-3/4 inches deep by 10-7/8 inches high keeps the support compact against the wall while still delivering vertical height for the rod position and shelf bearing.

Key Details That Support Closet Layout Work

• The oval rod opening is sized for a 1-1/8 inch by 5/8 inch (30mm by 15mm) closet rod, so the bracket centers and captures this specific profile for predictable hanging clearance.
• Shelf material up to 14 inches deep is supported by the 11-3/4 inch depth arm, giving you a stable bearing surface for typical closet shelving without overextending the load away from the wall.
• The bracket uses 3mm thick steel, which gives the arm and upright stiffness under load so the rod and shelf alignment stay consistent along the closet span.
• The overall dimensions of 1 inch width, 11-3/4 inches depth, and 10-7/8 inches height define the working envelope, helping you plan spacing, rod height, and side clearance inside the closet.
• A rated load capacity of 110 lbs allows the bracket to support typical clothing and shelf contents within that limit, helping keep the assembly performing in regular residential or light commercial use.
• The dull brass finish provides a muted brass appearance on the visible steel, which coordinates with matching rods and hardware in similar tones.

Bracket Size And Load Details For Installation Planning

The 11-3/4 inch overall depth of this Pro Value closet rod and shelf bracket positions the shelf within the supported 14 inch maximum shelf material depth, which helps you align the front edge with adjacent closet components. The 10-7/8 inch overall height gives you a defined distance between the top shelf bearing point and the lower oval rod position, which matters when you are setting hanging clearance above the floor. At 1 inch overall width, each bracket takes minimal lateral wall space, allowing multiple brackets along a run without crowding side panels. The 3mm thick steel construction and 110 lb load capacity work together to carry hanging garments plus stored items on the shelf within that rating, which is useful when you are calculating support spacing and expected loading.

How This Closet Bracket Works In Real Installations

Where This Oval Closet Rod Bracket Is Used

This Pro Value closet rod and shelf bracket is a closet shelf and rod bracket intended for organizing hanging space and overhead storage in closet runs. By supporting an oval closet rod sized 1-1/8 inch by 5/8 inch, it pairs with 30mm by 15mm oval rod stock typically used in wardrobe and reach-in closet layouts, so you can use it along straight wall sections or between end panels. Shelf material up to 14 inches deep rests on the 11-3/4 inch deep support arm, which suits standard closet shelves where you need enough depth for folded clothing or bins without extending beyond the bracket support. The dull brass finish ties into hardware and rods in the same color family, so the visible parts of the bracket blend into systems built around brass-tone components.

Bracket Dimensions That Help Repeatable Results

The 1 inch width of the bracket gives a narrow footprint on wall or panel surfaces, which helps when repeating bracket positions at regular intervals along a closet for even rod support. Overall dimensions of 11-3/4 inches deep and 10-7/8 inches high define a consistent geometry, so once you establish one bracket location, you can mirror those measurements down the line to keep the rod and shelf level. The 3mm steel thickness contributes to the 110 lb load capacity, giving each bracket the ability to share hanging and shelf loads within that limit across multiple supports, which reduces deflection when the closet is filled. Because the oval opening is matched to a 1-1/8 inch by 5/8 inch (30mm by 15mm) rod, the rod seats in a repeatable position on every bracket, helping the rod line stay straight for sliding hangers and even clearances at doors and side walls.

Common Closet Rod And Shelf Bracket Questions

Select This Bracket For Oval Rod Closet Runs

This Pro Value closet rod and shelf bracket combines rod support and shelf bearing in one steel part, which streamlines closet layout when you are using a 1-1/8 inch by 5/8 inch oval rod. The 11-3/4 inch depth and ability to support shelf material up to 14 inches deep let you size storage surfaces to common closet dimensions. With a 110 lb load capacity, 3mm thick steel, and defined overall dimensions, the bracket offers clear parameters for spacing, load distribution, and alignment as you build out closet sections.