Pro Value closet rod shelf bracket is a steel closet shelf and rod bracket designed to support an oval closet rod sized 1-1/8 inch by 5/8 inch, so the bracket holds that specific rod profile securely along its length. The bracket also supports shelf material up to 14 inches deep, so a single bracket can carry both the rod and an overhead shelf in one structural piece. Made from 3mm thick steel, the bracket provides a rigid support arm that resists bending under closet loads. The overall size of 1 inch wide by 11-3/4 inches deep by 10-7/8 inches high sets a predictable geometry, helping lay out rod height and shelf projection consistently from wall to wall. The oil rubbed bronze finish noted in the product name establishes a dark, uniform look that coordinates with similar oil rubbed bronze closet components.
The overall size of 1 inch wide by 11-3/4 inches deep by 10-7/8 inches high lets this oval closet rod shelf bracket act as a fixed reference for layout, so rod centerline and shelf edge can be positioned consistently between walls. Supporting shelf material up to 14 inches deep means the 11-3/4 inch bracket depth works within that range, which helps keep shelf projection and rod setback aligned without separate support geometry. The 3mm thick steel body provides a sturdy mounting surface, so fastener placement follows the flat steel profile during installation. The 110 lb load capacity gives an objective target when spacing brackets along a closet run, directly affecting how many brackets are used to carry combined hanging and shelf loads.
This Pro Value Series closet shelf and rod bracket is designed to support an oval closet rod sized 1-1/8 inch by 5/8 inch (30mm by 15mm), so it fits projects built around that specific oval tubing. The bracket also carries shelf material up to 14 inches deep, allowing it to serve in standard reach-in closet sections where a hanging rod is paired with an upper shelf. With an overall depth of 11-3/4 inches, the support arm aligns well with typical closet shelf projections, keeping stored items within easy reach while leaving space beneath for hanging garments. The 10-7/8 inch height positions the rod and shelf relationship consistently, which helps matching left and right brackets support the same rod line without additional shimming.
The 110 lb load capacity provides a clear performance reference for planning hanging and shelf loads, so bracket spacing can be set to keep each bracket working within that limit. Because the bracket is made from 3mm thick steel, the support arms resist flexing as weight is added, helping rods and shelves stay level along the run. The 1 inch width helps concentrate support into a narrow footprint, useful when positioning multiple brackets along a wall while still delivering vertical strength. The designed support for an oval rod sized 1-1/8 inch by 5/8 inch ensures the rod sits in a matching cradle, which aids alignment and helps reduce point loading on the tube. The combination of material thickness, defined overall dimensions, and stated capacity gives installers predictable behavior in everyday closet use.
This Pro Value Series bracket is designed to support an oval closet rod sized 1-1/8 inch by 5/8 inch (30mm by 15mm), so it fits that specific oval tube profile accurately.
The bracket supports shelf material up to 14 inches deep, allowing a standard upper shelf above the rod while staying within the designed projection range.
The overall size is 1 inch wide by 11-3/4 inches deep by 10-7/8 inches high, which sets clear layout dimensions for rod height and shelf projection.
The bracket has a load capacity of 110 lbs, giving a defined working limit when planning the number of brackets along a closet section.
The Pro Value Series closet rod shelf bracket is made from 3mm thick steel, providing a rigid support structure for the rod and shelf assembly.
The product name specifies an oil rubbed bronze finish, giving the steel bracket a dark, uniform appearance suited to oil rubbed bronze closet hardware.
The Pro Value closet rod shelf bracket is built for oval rods sized 1-1/8 inch by 5/8 inch and shelf material up to 14 inches deep, so it suits combined hanging and shelving layouts. With 3mm thick steel construction, an overall size of 1 inch wide by 11-3/4 inches deep by 10-7/8 inches high, and a 110 lb load capacity, it offers defined geometry and capacity for planning closet runs. For projects built around this rod profile and depth range, this bracket provides a single steel support point for both rod and shelf.
Sold In: 1 Each