NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR07A36SMB1OUF1 to RSR07A36SMB1OUF1.
Omega National Red Oak Omni Wall Mount Hood
Omega National 36"W Red Oak Omni Wall Mount Range Hood gives you a modern, block-style wood hood that creates a bold focal point, so a kitchen layout gains a strong visual anchor around the cooking area without extra decorative parts. The red oak construction supports finishing to match surrounding cabinetry, which helps installers tie the hood into existing woodwork on retrofit jobs. The wall mount design focuses the hood against the wall run, so layouts with standard cooktops or ranges get a defined ventilation zone. A silver metallic powder-coated liner designed to fit Broan ventilation sets up the interior for a Broan ventilator connection, which streamlines pairing the decorative shell with a compatible blower system. The adjustable height that can be trimmed to fit your space lets you tailor overall hood height on site, so installers can align sightlines and clearances across varying ceiling heights and cabinet runs.
Key Worksite Advantages Of This Wood Range Hood
- The modern, block-style design creates a bold focal point, so installers can visually center the cooking area and deliver a clean-lined look without complex applied moldings or added build-outs on site.
- The adjustable height that can be trimmed to fit your space allows field modification of the hood height, so crews can align the hood with upper cabinets, soffits, or unique ceiling conditions while maintaining consistent reveal lines.
- The French cleat hanging system supports straightforward wall installation, so installers can secure the cleat, lift the hood onto it, and fine-tune position without juggling the full weight during initial layout.
- The silver metallic powder-coated liner designed to fit Broan ventilation creates a defined interior shell, so mounting a Broan ventilator and routing the duct path stays organized inside a durable, easy-to-wipe surface.
- The 36 inch width focuses the hood over typical 30 inch cooking equipment with some overhang, so the capture area remains centered while still fitting common cabinet runs in residential kitchens.
Installation And Mounting Details For This Hood
This Omega National wood range hood uses a French cleat hanging system, which lets installers fasten the cleat first, then hang the hood body onto it for controlled placement along the wall. That approach simplifies supporting the hood while checking level. The adjustable height that can be trimmed to fit your space means the vertical dimension of the hood can be cut down on site, giving flexibility to work under lower ceilings or to align with existing cabinet tops. The silver metallic powder-coated liner designed to fit Broan ventilation provides a fixed interior footprint for the Broan ventilator, so layout of cutouts and duct transitions stays predictable from job to job. With its 36 inch width, the hood integrates into standard cabinet runs, keeping layout work familiar for installers accustomed to typical range widths.
How This Range Hood Works In Real Kitchens
Where This Omega National Hood Fits Best
This Omega National Omni wall mount range hood fits kitchens set up for a wall-mounted cooking zone, where a defined focal point over the range helps organize the room. The modern, block-style design supports contemporary or transitional layouts that call for straight lines rather than shaped chimney details, which matters when designers want a clean elevation across upper cabinets. The 36 inch width works well over standard ranges, giving a proportional look between adjacent wall cabinets without crowding. The red oak construction lets shops stain or finish to match surrounding cabinetry, so in both new construction and remodels the hood can tie directly into door styles and face frames. Because the liner is designed to fit Broan ventilation, the hood suits projects already spec'd with a Broan ventilator, aligning the decorative shell with a known ventilation platform.
Why The Design Details Support Repeatable Results
The French cleat hanging system supports repeatable installations, because crews follow the same sequence of fastening the cleat, verifying level, then dropping the hood onto the cleat instead of improvising support on each job. The adjustable height that can be trimmed to fit your space allows consistent visual alignment across different projects, since installers can cut the hood to hit a target line relative to cabinets or ceiling, reducing layout compromises. The silver metallic powder-coated liner designed to fit Broan ventilation defines the internal working cavity, so ventilation mounting points and duct locations remain predictable, which can speed rough-in planning and rough opening work. The modern, block-style design provides flat surfaces and straight edges that simplify scribing to walls, which helps reduce gaps and later touchups. Together, these details give installers a wood range hood that behaves predictably across multiple kitchen layouts while still delivering a bold focal point.
Common Questions About This Omega National Hood
What type of ventilation pairs with this wood range hood?
This Omega National wood range hood uses a silver metallic powder-coated liner designed to fit Broan ventilation, which aligns the decorative hood shell with Broan ventilator units for a coordinated installation.
How does the adjustable height feature help on site?
The adjustable height that can be trimmed to fit your space lets installers cut the hood to a specific vertical dimension, so it lines up with cabinets or ceilings across different kitchen conditions.
What is the mounting method for this range hood?
This range hood installs with a French cleat hanging system, allowing installers to mount the cleat, check level, then hang the hood body onto it for controlled positioning on the wall.
How wide is the Omega National Omni wall mount hood?
The Omega National 36"W Red Oak Omni Wall Mount Range Hood has a 36 inch width, which aligns well with common 30 inch cooking appliances and standard cabinet runs in many kitchen layouts.
Why is the liner finish important for Broan ventilation?
The silver metallic powder-coated liner designed to fit Broan ventilation creates a durable interior shell, giving Broan ventilator components a defined mounting area with a smooth, easy-to-wipe surface.
What role does the modern block-style design play?
The modern, block-style design creates a bold focal point above the range, helping designers and installers deliver a strong visual centerpiece without adding extra decorative elements.
Select This Hood For Broan-Based Wall Installations
The Omega National 36"W Red Oak Omni Wall Mount Range Hood pairs a modern, block-style wood shell with a silver metallic powder-coated liner designed to fit Broan ventilation, giving projects a coordinated decorative and functional solution. The French cleat hanging system and adjustable height that can be trimmed to fit your space support efficient installation and precise visual alignment across different kitchen layouts. For wall-mounted cooking zones built around Broan ventilation, this hood offers a straightforward way to add a bold red oak focal point while keeping mounting and interior layout consistent from job to job.
