NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR07A36SMB1EUF1 to RSR07A36SMB1EUF1.
Omega National 36 inch walnut omni wall mount range hood creates a bold focal point with its modern, block-style design, so a standard wall run gains a defined centerpiece without additional decorative build-up. Omega National Products builds this hood from walnut, which supports a natural wood appearance that can align with walnut cabinetry or millwork in the same space. The 36 inch width paired with the omni wall mount style suits a typical cooktop area along a wall, so layout planning stays straightforward. As a wood range hood, it fits within kitchen and bath cabinet accessory projects where matching species is important. The design centers the hood visually, which helps installers finish a feature wall without adding separate architectural elements.
This wood range hood installs using a French cleat hanging system, which allows the rigid cleat to carry the hood weight while the hood body drops onto the cleat for final positioning. That mounting style lets installers level the cleat first, then hang the hood and check alignment along adjacent cabinets in one step. Because the hood height can be trimmed to fit the space, crews can cut the body to suit ceiling height or tile terminations before hanging, keeping cut edges controlled on the bench instead of overhead. The 36 inch width helps coordinate with common cooktop widths and cabinet layouts, so horizontal alignment with neighboring wall cabinets and fillers stays manageable during installation.
This Omega National wood range hood fits kitchen and bath cabinet accessory projects where a wood range hood is specified as a visual focal point. The 36 inch width positions it well over a standard cooking area along a wall, so it can sit between wall cabinets or open shelving. The modern, block-style design supports clean-lined projects where square, geometric forms are preferred over ornate shapes, which helps it blend into contemporary or transitional layouts. Walnut construction supports use wherever walnut cabinetry, panels, or trim are present, allowing the hood to visually tie together upper cabinets and surrounding millwork. Because the design is omni wall mount, it serves projects that call for a prominent wall-mounted hood rather than an island configuration.
This Omega National range hood with Broan liner uses a silver metallic powder-coated liner designed to fit Broan ventilation, so the liner forms a defined metal interior that mates with Broan ventilator components. That dedicated liner gives installers a consistent cavity size for positioning the Broan ventilator sold separately, which supports repeatable cutout and duct transitions inside the hood shell. The powder-coated silver metallic finish on the liner provides a uniform interior surface, which helps create a finished look inside the capture area. Because the hood height can be trimmed, installers can set the bottom of the hood at the target elevation relative to the cooktop while still maintaining the liner fit for the Broan ventilation. The French cleat hanging system further supports repeatable results by allowing the cleat to be set level first, so when the hood with its liner is hung, the assembly aligns along the wall and adjoining cabinets without incremental shimming.
This Omega National wood range hood is 36 inches wide, which suits typical cooktop zones and lets installers center the hood between standard-width wall cabinets.
The French cleat hanging system lets installers level and fasten the cleat first, then hang the hood on it, improving alignment with nearby cabinets and simplifying handling.
The hood height is adjustable because the hood can be trimmed to fit the space, allowing installers to match ceiling height and desired cooktop clearance.
The silver metallic powder coated liner creates a finished metal interior sized for Broan ventilation, giving a defined cavity for positioning the Broan ventilator sold separately.
This unit is an omni wall mount range hood, so it is designed to mount on a wall over the cooking area rather than as an island configuration.
The modern, block-style design creates a bold focal point, giving the cooking wall a clean, strong visual anchor without additional decorative structures.
This Omega National walnut wall mount range hood combines a modern, block-style profile with an adjustable, trim-to-fit height, so installers can tailor the hood to real room conditions. The French cleat hanging system supports a controlled installation sequence where alignment is set at the cleat and the hood is seated afterward. With its silver metallic powder-coated liner designed to fit Broan ventilation and a Broan ventilator sold separately, the hood links a wood exterior to a defined ventilation interior. For projects calling for a 36 inch walnut focal point on a wall, this configuration offers a coordinated wood hood and liner solution ready to integrate into kitchen and bath cabinet layouts.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSDPRHVBF300SS Mfr# RHVBF300SS | Broan Select Stainless Steel Range Hood Ventilator, 260 CFM | ||||
Sold in: 1 Each | RSRHVBF300SS Mfr# RHVBF300SS | Broan Select Stainless Steel Range Hood Ventilator, 260 CFM | ||||
Sold in: 1 Each | RSDPRHVB400SS Mfr# RHVB400SS | 21-3/8" Broan Select Stainless Steel Range Hood Ventilator, 400 CFM | ||||
Sold in: 1 Each | RSRHVB400SS Mfr# RHVB400SS | 21-3/8" Broan Select Stainless Steel Range Hood Ventilator, 400 CFM | ||||
Sold in: 1 Each | RSRHVB600SSV Mfr# RHVB600SSV | Broan Select Stainless Steel Range Hood Ventilator, 600 CFM |