Omega National Omni range hood 48x42 R07A48SMB17UF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR07A48SMB17UF1 to RSR07A48SMB17UF1.

Omega National 48 Inch Omni Wall Mount Range Hood

Omega National 48 inch Omni wall mount range hood is a rift white oak wood range hood that creates a bold focal point with its modern block-style design, so it anchors the cooktop wall visually in contemporary kitchens. The 48 inch width and 42 inch reference size tie directly to typical cooking zones, helping installers plan proportion and cabinet layout around a defined wood hood footprint. As a wall mount range hood in the wood range hoods category, it serves as both a ventilation shell and a finished design element, simplifying coordination with surrounding cabinetry. The Omega National Products branding and R07A48SMB17UF1 part number give shops and remodelers a precise identifier, which supports repeat ordering for multi-unit projects or matching future phases. Classified as a kitchen and bath cabinet accessory, this hood integrates into standard cabinet projects so designers can specify it alongside other casework components from the same distributor.

Key Omni Hood Details That Support Your Projects

• The modern, block-style design creates a bold focal point, which helps installers and designers deliver a clean-lined, contemporary statement above the cooking surface without additional ornamentation.
• The rift white oak construction provides a consistent linear grain appearance, giving finish shops a predictable surface for stain or clear finishes that align with modern wood cabinet programs.
• The adjustable height design allows the hood to be trimmed, so field crews can adapt the overall height to specific ceiling conditions or sightline requirements within the kitchen run.
• The French cleat hanging system allows the hood to install easily, giving installers a straightforward wall-mount method that supports alignment and leveling during hanging.
• The silver metallic powder-coated liner is designed to fit Broan ventilation, so the interior metal liner pairs with compatible Broan ventilator components for a coordinated ventilation build-out.
• The Broan ventilator sold separately note clarifies that the ventilation blower and related Broan components are specified independently, so shops can select Broan units suited to the project airflow needs.

Wall Mount, Liner, And Trim-Oriented Installation Use

This Omega National wood range hood uses a French cleat hanging system for wall mounting, so installers can engage a familiar, two-part hanger that supports the hood while they fine-tune level across the run. The adjustable height feature means the wood shell can be trimmed, letting field crews dial in the installed height relative to the cooktop and upper cabinets. With a silver metallic powder-coated liner engineered to fit Broan ventilation, the hood provides a defined metal cavity sized for Broan ventilator integration, streamlining layout for duct transitions within the liner envelope. As a 48 inch wide, 42 reference size wall mount unit, it slots into larger cooking zones, allowing designers to plan corresponding base cabinets and uppers around a known wood hood dimension.

Using This Omni Range Hood In Real Projects

Where This Rift White Oak Omni Hood Fits Best

This Omega National 48 inch Omni wall mount range hood in rift white oak is suited to kitchen projects where the hood is expected to act as a strong visual centerpiece. The modern, block-style design gives shops a square-edged, streamlined profile that aligns with flat-panel and simple door styles, reducing the need for additional decorative build-out. As part of the wood range hoods product class, it ties directly into cabinet runs, letting designers treat the hood as another wood element rather than a contrasting metal canopy. The 48 by 42 reference sizing works for wider cooking areas, so layout planning for ranges or cooktops can key off this larger hood width. Because the liner is designed to fit Broan ventilation, projects that standardize on Broan ventilators can keep a single ventilation brand while still presenting a wood exterior.

Details That Support Consistent Mounting And Finish Results

The French cleat hanging system on this Omega National Omni range hood provides a predictable mount approach, which helps installers hang the hood, check alignment, and adjust side-to-side position along the cleat before finalizing placement. The adjustable height feature, which allows the hood to be trimmed, lets field carpenters adapt the overall hood height when ceiling conditions or cabinet lines vary from plan, reducing the need for redesign when dimensions shift on site. Rift white oak as the face material offers a straight, linear grain pattern, giving finishing departments a uniform surface for stain or clear finishes that aim for a modern aesthetic. The silver metallic powder-coated liner, designed for Broan ventilation, defines the interior metal boundary, making it clear where the Broan ventilator will reside and helping mechanical trades coordinate duct routing relative to the liner geometry.

Common Questions About The Omega Omni Range Hood

Select This Omni Hood For Broan-Based Wood Installs

The Omega National 48 inch Omni wall mount range hood in rift white oak combines a modern block-style wood shell with a silver metallic powder-coated liner designed to fit Broan ventilation, so it suits projects standardizing on Broan ventilators with a wood exterior. With adjustable height that can be trimmed and a French cleat hanging system, it supports efficient field installation and alignment. Specifying R07A48SMB17UF1 through Wurth Baer Supply lets cabinet shops and contractors tie design, ventilation, and woodwork together around a single, clearly defined hood model.