Omega National 48 inch Alder Omni Wall Mount Range Hood

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR07A48SMB1QUF1 to RSR07A48SMB1QUF1.

Omega National Alder Wall Mount Range Hood Purpose

Omega National 48 inch Alder Omni Wall Mount Range Hood creates a bold focal point using a modern, block-style design, so kitchen layouts gain a clean-lined centerpiece that aligns with contemporary cabinet runs and straight-edge trim details. The wood range hood is built in alder, which gives installers a workable hardwood face for finishing alongside alder doors, face frames, and moldings in custom or semi-custom projects. Its wall mount configuration suits standard kitchen layouts where the hood anchors directly to a vertical surface above the cooktop. The hood is classified as a wood range hood, so it integrates visually with surrounding cabinetry while still coordinating with metal cooking appliances below. By pairing a defined 48 inch width with a 42 inch dimension identified in the description, this model targets larger cooking zones where a full-width wood enclosure is desired over a matched Broan ventilation system.

Key Omni Range Hood Details For Projects

• The modern, block-style design provides straight, flat lines that speed layout and scribing against square cabinet faces and simple crown treatments.
• The adjustable height hood that can be trimmed to fit the space lets installers cut the lower section to match ceiling height or tile terminations, improving visual alignment.
• The French cleat hanging system streamlines wall mounting by giving a continuous bearing surface, which helps position the hood level before final securing.
• The silver metallic powder-coated liner designed to fit Broan ventilation creates a protected interior cavity around the ventilator, helping separate the wood shell from the metal system.
• The liner designed to fit Broan ventilation supports consistent positioning of a Broan ventilator, simplifying repeat installations that use the same Broan models.

Wall Mount, French Cleat, And Trim-To-Height Fit

The wall mount configuration places this wood range hood directly on the wall above the cooking surface, giving installers a predictable alignment reference with base and wall cabinet runs. The adjustable height, with the hood able to be trimmed, lets fabricators cut the body to hit a planned finished elevation, whether aligning to a ceiling, soffit, or upper cabinet line. The French cleat hanging system adds a mating rail on the wall and hood, so the hood can be lifted into place and seated onto the cleat for immediate support. This cleat approach helps with solo or small-crew installations by allowing fine side-to-side adjustments along the cleat before final fastening that locks in the final position.

How This Omega National Hood Works In Kitchens

Where The Alder Omni Wall Mount Hood Fits Best

This Omega National wood range hood fits kitchen projects calling for a 48 inch wide focal point above a cooking zone, particularly where straight, block-style geometry coordinates with slab or simple Shaker doors. The alder construction suits installations where surrounding cabinet components use alder, so finishing teams can stain or clear-finish the hood to visually blend with adjacent cabinetry. As a wall mount model, it installs on the kitchen wall rather than over an island, matching common ranges or cooktops set in perimeter runs. The dimensions referenced as 48x42 position the hood for larger cooking equipment, giving coverage that better matches broader ranges while keeping the enclosure consistent with typical upper cabinet depths.

Why The Broan-Compatible Liner And Cleat Matter

The silver metallic powder-coated liner designed to fit Broan ventilation creates a defined metal chase for the ventilator, which helps shield the alder wood from the ventilator area and establishes a consistent cutout footprint. This liner-to-Broan match reduces layout work when installers repeat Broan ventilator installations across multiple jobs with similar specifications. The French cleat hanging system affects workflow by allowing the cleat to be anchored to studs first, then letting the hood body drop onto the cleat, which aids in leveling and supporting the weight during alignment. Because the hood can be trimmed for height, installers can coordinate the bottom edge with code-driven hood placement ranges and aesthetic sightlines in relation to tile backsplashes and wall cabinets. Together, the Broan-compatible liner and cleat simplify the transition between the wood enclosure, metal ventilator, and finished wall.

Common Questions About The Omega National Range Hood

Choose This Hood For Broan-Based Wood Installations

The Omega National 48 inch Alder Omni Wall Mount Range Hood with Broan-compatible silver metallic powder-coated liner ties a modern, block-style wood exterior to a ventilator-ready interior. For installations using Broan ventilation and alder cabinetry, this model offers a coordinated wood shell, an adjustable trim-to-height body, and a French cleat hanging system that supports straightforward wall mounting on kitchen projects.