Sugatsune Inset Pocket Door Kit, Min. Cab. Depth 16-9/16", Door Height 63" - 78-3/4", 4-Slides, - ALT-ST20-D360L-16

Sugatsune Inset Pocket Door Kit For Cabinetry

Sugatsune inset pocket door kit is a pocket door hardware system designed for inset doors in cabinets with a minimum cabinet depth of 16-9/16 inches. The system supports door heights from 63 inches to 78-3/4 inches, so it covers a common range for tall multimedia, closet, and workspace cabinets where doors need to slide back out of the way. This pocket door hardware uses four slides in the kit, which spreads the movement load over multiple points and helps the door travel smoothly into the cabinet. The product belongs to the pocket door hardware class and fits multimedia and workspace components, giving installers a focused solution for that style of project. The kit uses an ST20 L-type configuration, which identifies the specific layout and movement pattern for planning cabinet interior space. Sold in a single kit, it provides the matched pocket door system under one manufacturer part number ALT-ST20-D360L-16.

Key Pocket Door System Details For Projects

• The inset pocket door system uses 5-speed adjustable soft-closing dampers, which control the door motion and let installers tune closing behavior for smoother operation in regular cabinet use.
• A synchronized board is part of the pocket door system, coordinating movement between components so the door action stays aligned as it travels in and out of the cabinet opening.
• The pocket door kit uses four slides, which distribute travel forces and support the door during extension and retraction in multimedia and workspace cabinets.
• The listed hinges and hinge mounting plates form the pivot connection for the inset door, allowing the door to transition between opening and pocket positions within the frame.
• The system is identified as Sugatsune America pocket door hardware in the pocket door hardware class, providing a defined product type for specifying and reordering on cabinetry projects.

Inset Pocket Door Installation And Movement Setup

This inset pocket door system is designed for cabinets with a minimum cabinet depth of 16-9/16 inches, so the installer plans carcass depth around that dimension to allow the door to retract fully. The supported door height range from 63 inches to 78-3/4 inches means door layout, hinge positions, and slide placement can be planned within those limits for tall cabinet applications. The 5-speed adjustable soft-closing dampers give the installer control over closing motion, so the door movement can be tuned to the specific cabinet height and door weight within the stated range. With four slides driving the pocket action, the system delivers guided travel in and out of the cabinet, helping maintain alignment of an inset door relative to the face frame or front plane.

Using This Pocket Door Hardware In Cabinet Work

Where The Sugatsune Inset Pocket Door Kit Fits

This inset pocket door system fits into shelf, closet, multimedia, and workspace cabinet projects where doors need to retract into the cabinet while remaining flush when closed. The minimum cabinet depth of 16-9/16 inches gives designers and installers a fixed depth parameter when laying out cabinet sides and interior clearances. Within the door height range of 63 inches to 78-3/4 inches, the system can serve tall entertainment centers, storage closets, or workspace cabinets that benefit from doors clearing the opening entirely. The ST20 L-type format identifies the motion style, which helps installers align the cabinet interior, shelves, and equipment so the retracting door path remains unobstructed.

Details That Support Repeatable Pocket Door Results

The 5-speed adjustable soft-closing dampers are central to consistent performance, since they control how the door closes into the cabinet and allow adjustment when conditions change over time. This lets installers fine-tune the closing speed within the system capability to suit door size in the supported height range. The synchronized board links the motion of the pocket door components, helping keep the door tracking evenly as it moves between open and stowed positions. Four slides carry the moving load, which supports straighter travel and can reduce binding when the cabinet is built to the stated depth. The combination of hinges, hinge mounting plates, and slides provides a connected path from the door edge to the cabinet interior, supporting repeatable setups on similar projects. Identifying the product by manufacturer part number ALT-ST20-D360L-16 helps shops standardize on a single configuration across multiple cabinets.

Common Questions About This Pocket Door System

Choose This Kit For Defined Inset Pocket Door Work

The Sugatsune inset pocket door kit with 5-speed adjustable soft-closing dampers, four slides, hinges, hinge mounting plates, synchronized board, and damper gives cabinet shops a defined system for inset pocket door applications. With a minimum cabinet depth of 16-9/16 inches and a door height range from 63 inches to 78-3/4 inches, it fits common tall cabinet layouts in multimedia and workspace projects. Specifying the ALT-ST20-D360L-16 pocket door hardware lets shops and installers repeat the same motion profile and adjustment features across multiple cabinets.