Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Sugatsune inset pocket door kit is a pocket door hardware set designed for inset doors in cabinets where doors need to slide back into the cabinet. The kit is specified as an inset pocket door system, so the door sits flush with the cabinet face when closed, which matters on built-ins and multimedia cabinets where a clean front is important. The system is described as a pocket door kit with four slides, so the slide layout supports smooth movement as the door travels out and then back into the cabinet, useful on tall doors where stability is critical. The product is classified as pocket door hardware, which means it is intended to handle the opening, sliding, and retracting motion of cabinet doors rather than acting as standard hinge-only hardware.
The inset pocket door system is specified for a minimum cabinet depth of 19-1/2 inches, which means the cabinet carcass must provide that depth so the door can retract fully into the opening without projecting into the room. The door height specification of 78-3/4 inches to 94-1/2 inches sets the working range, so the system geometry is laid out for tall cabinet doors within those dimensions, important on entertainment centers and storage wall runs. The four-slide layout in the pocket door slides kit supports both the extension of the door and its travel into the pocket, so alignment of the slides to the cabinet sides and top is central to achieving straight, repeatable motion.
The inset pocket door system is defined by a minimum cabinet depth of 19-1/2 inches, so it fits projects using deeper cabinets such as multimedia, closet, or workspace storage where the door can retract fully into the interior. The specified door height range of 78-3/4 inches to 94-1/2 inches means the system is oriented toward full-height or near full-height doors common in tall storage cabinets and built-in wall units. The product is categorized as pocket door hardware and pocket door slides, so its role is to move the door from a closed, inset position into a retracted position inside the cabinet, useful when doors need to clear the opening completely during use. The Sugatsune America branding and ALT-ST20-D360LL-19 manufacturer part number identify it as part of a defined pocket door line, which helps align hardware selection with other Sugatsune pocket door components in a project plan. The synchronized board mentioned in the web description works with the four slides, coordinating slide movement so that the door motion stays balanced across the hardware set.
The inset pocket door system uses four slides, so the motion of the door is handled by multiple tracks, which helps the door remain stable as it travels out of the cabinet and then back into the pocket path. The presence of a synchronized board in the kit description means slide travel is coordinated, which supports smoother, more even motion between the upper and lower or paired slides, reducing binding as the door moves. The system is described as having 5-speed adjustable soft-closing dampers, so the closing speed can be tuned to match the door size and weight within the stated height range, supporting controlled deceleration at the end of travel to reduce impact on the cabinet. The web description lists hinges and hinge mounting plates as part of the system, indicating the door starts on hinges before engaging the slides, which allows a pivot-and-slide sequence that is typical in pocket door applications for tall cabinets. The product class listed as pocket door hardware confirms that these components are designed to work together as a dedicated pocket door solution rather than as general-purpose slides, which simplifies layout decisions around door motion in a cabinet run.
The inset pocket door system is designed for inset cabinet doors, so the door sits flush with the cabinet face when closed and then retracts fully into the cabinet during use.
The inset pocket door kit is specified for a minimum cabinet depth of 19-1/2 inches, so the cabinet must provide that depth to allow the door to slide fully into the interior space.
The pocket door system is specified for door heights from 78-3/4 inches to 94-1/2 inches, aligning it with tall cabinet or multimedia doors in that height range.
The 5-speed adjustable soft-closing dampers let the installer tune closing speed so the door decelerates smoothly at the end of travel, limiting impact on the cabinet.
The pocket door slides kit uses four slides to support and guide the door as it opens and retracts, helping maintain stable, guided motion on tall doors.
The ALT-ST20-D360LL-19 manufacturer part number identifies this specific Sugatsune inset pocket door system, helping match it to design documents and cabinet layouts.
This Sugatsune inset pocket door kit is defined for cabinets with at least 19-1/2 inches of depth and door heights from 78-3/4 inches to 94-1/2 inches, aligning it with tall, inset cabinet doors that need to retract fully. The combination of four slides, a synchronized board, hinges with hinge mounting plates, and 5-speed adjustable soft-closing dampers gives the hardware set the elements needed to move an inset door from closed position into the cabinet with controlled motion. For projects using tall inset doors on deeper cabinets where clear openings and smooth operation matter, this pocket door hardware configuration provides a dedicated system built around that door size and motion.
