Sugatsune Inset Pocket Door Kit, Min. Cab. Depth 22-1/2", Door Height 63" - 78-3/4", 4-Slides, - ALT-ST20-D360L-22
Description
Inset Pocket Door System For Cabinet Applications
Inset Pocket Door System describes this Sugatsune America pocket door hardware kit designed to move cabinet doors smoothly into a pocket, so a multimedia or workspace cabinet can stay open without doors projecting into the room. This pocket door kit is specified for minimum cabinet depth of 22-1/2 inches, giving installers a clear depth requirement when laying out cabinet sides and interior clearances. The system is designed for door heights from 63 inches to 78-3/4 inches, which defines the vertical range of doors it can carry on an installation. This pocket door hardware uses a total of four slides, so the door action is supported along its travel into and out of the cabinet pocket. The kit is classified as ST20 L-type, which identifies the specific Sugatsune configuration when matching to drawings, past jobs, or additional project specifications.
Pocket Door Hardware Details That Support Workflow
- This Sugatsune inset pocket door kit is classified as pocket door hardware, giving cabinetmakers a defined hardware solution when planning doors that retract fully into cabinets for multimedia or workspace projects.
- The hardware kit uses four slides in the pocket door system, which supports smoother travel of the door into the pocket and helps distribute movement loads during repeated openings on a completed cabinet.
- The minimum cabinet depth rating of 22-1/2 inches ties the hardware choice directly to cabinet case design, allowing the cabinet depth to be coordinated with the required door travel path into the pocket.
- The specified door height range of 63 inches to 78-3/4 inches sets clear limits for door panel sizing, which helps with cutting doors to size and confirming that the slide system will operate within its intended range.
- The pocket door system is sold under manufacturer part number ALT-ST20-D360L-22, which gives shops a precise identifier when matching replacement components or repeating the same design across multiple cabinet runs.
Mounting The Inset Pocket Door System Accurately
This inset pocket door kit is designed around a minimum cabinet depth of 22-1/2 inches, so the cabinet case needs that depth available for the pocket and slide travel path when laying out the interior. The specified door height range of 63 inches to 78-3/4 inches defines where hinges and pocket components are positioned along the stile, supporting consistent hinge spacing from one door to the next. Four slides are used in the pocket door system, so installers align multiple slide members, improving guided motion as the door is moved in and out. The ST20 L-type classification describes the layout style within the Sugatsune system, helping shops keep mounting practices consistent when this hardware is used across a series of similar cabinets in a project.
Using This Sugatsune Inset Pocket Door Kit On Projects
Where This Pocket Door Hardware Fits Best
This Sugatsune America inset pocket door kit is suited for cabinet projects in shelf, closet, multimedia, and workspace applications, because it is categorized under shelf, closet and garage organization and multimedia and workspace components. The pocket door slides are configured for inset doors, so the doors sit flush within the cabinet opening when closed, which keeps the cabinet face clear for surrounding trim or adjacent cabinets. The minimum cabinet depth of 22-1/2 inches aligns with deeper cabinets often used for media components or workspaces, enabling the door to retract fully inside the cabinet without obstructing the front. The door height capacity from 63 inches to 78-3/4 inches supports tall doors commonly found in entertainment centers and storage units, so one hardware standard can serve multiple cabinet heights.
How System Details Help Achieve Repeatable Motion
This inset pocket door system uses 5-speed adjustable soft-closing dampers, which manage the final closing motion of the door and allow adjustment of the damping action to suit the door size or user preference, reducing slamming forces on the cabinet. The pocket door kit relies on four slides and a synchronized board, so the door movement is coordinated between slide members, which helps the door travel evenly when it is pulled out of or pushed into the cabinet. The presence of three hinges and three hinge mounting plates in the kit defines a three-hinge layout, giving the door multiple pivot points that help maintain alignment along the full door height. The kit also includes a damper as part of the 5-speed adjustable soft-closing capability, so the closing stage is controlled every time the door is brought back to the front of the cabinet opening.
Common Questions About This Pocket Door Hardware
What cabinet depth is required for this inset pocket door system?
The inset pocket door system is specified for a minimum cabinet depth of 22-1/2 inches, which provides the travel distance needed for the door to fully retract into the cabinet pocket.
What door height range does the Sugatsune inset pocket door kit support?
The Sugatsune inset pocket door kit is designed for door heights from 63 inches to 78-3/4 inches, allowing it to serve a variety of tall cabinet doors in multimedia or workspace installations.
How do the 5-speed adjustable soft-closing dampers help cabinet doors?
The 5-speed adjustable soft-closing dampers manage the final closing motion of the door, allowing adjustment of the damping action to control speed and reduce impact on the cabinet.
How many slides are used in this pocket door hardware system?
The pocket door hardware system uses four slides, which support and guide the door during its travel into and out of the cabinet pocket for smoother operation.
What is the role of the synchronized board in this pocket door kit?
The synchronized board in this pocket door kit coordinates the motion of the slides, helping the door move more evenly and consistently along its track during opening and closing.
What does the ST20 L-type designation indicate for this hardware?
The ST20 L-type designation identifies the specific layout style in the Sugatsune pocket door system, helping match this hardware to plans or repeat it across similar cabinet runs.
Select This Inset Pocket Door System For Your Build
This Sugatsune America inset pocket door kit combines four pocket door slides with 5-speed adjustable soft-closing dampers, giving cabinet shops a defined motion system for inset doors in deeper cabinets. The minimum cabinet depth requirement of 22-1/2 inches and door height range from 63 inches to 78-3/4 inches provide clear parameters for cabinet design, so doors can be sized and located to work with this hardware. With the ALT-ST20-D360L-22 designation and ST20 L-type classification, this pocket door hardware can be specified consistently from job to job when planning multimedia and workspace cabinets.