Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Inset Pocket Door System describes a complete pocket door kit from Sugatsune America designed for cabinet and multimedia applications where doors need to slide back into the cabinet. This pocket door hardware uses four slides to support smooth movement, which helps larger doors travel in and out of the cabinet opening with better stability under load. The minimum cabinet depth of 28-9/16 inches sets the required case depth so the door can fully retract, which matters when laying out built-ins or workspace cabinetry. A door height range of 78-3/4 inches to 94-1/2 inches defines the usable opening size, giving a clear window for tall cabinet planning. The 5-speed adjustable soft-closing dampers control closing speed, which helps reduce door slam and improves user feel. The system is sold as a kit, identified by manufacturer part ALT-ST20-D360LL-28, which supports consistent specifying and reordering.
This Sugatsune pocket door kit is engineered around a minimum cabinet depth of 28-9/16 inches, which drives overall case dimensioning and internal clearance planning. The defined door height range of 78-3/4 inches to 94-1/2 inches gives a fixed band for layout, which helps align hinge positions and slide locations on tall fronts. The kit uses four slides to guide the door, so both vertical and horizontal mounting locations matter for accurate movement. Because the dampers offer 5-speed adjustable soft-closing, hinge and slide alignment directly affect how the soft-close function engages, so precise layout within these given dimensions supports consistent operation across multiple cabinets.
This Sugatsune America pocket door kit falls under pocket door hardware for multimedia and workspace components, which suits applications like entertainment cabinets or workstations where doors must move completely out of the way. The inset pocket door configuration lets the door sit within the opening rather than overlaying, which aligns well with flush-face cabinetry or built-ins that continue trim lines across multiple cabinets. The door height capability of 78-3/4 inches to 94-1/2 inches supports tall fronts often used on full-height cabinets or large media enclosures. A minimum cabinet depth of 28-9/16 inches works with deeper cases typically found in multimedia or storage runs, which helps integrate this system into standard depth designs for those uses.
The use of four slides in this pocket door slides kit controls door travel on multiple points, which helps reduce racking and twist as tall doors move, leading to more predictable clearances. The synchronized board in the kit coordinates movement between slide actions, which supports smoother transitions as the door shifts from hinged opening into pocketing motion. Three hinges and three hinge mounting plates provide defined pivot points, which help maintain consistent reveals when doors are sized within the 78-3/4 inch to 94-1/2 inch range. The soft-closing damper with 5-speed adjustment lets an installer set the closing rate after the cabinet is assembled, which can reduce rebound or bounce on heavier doors built within the supported height range. Together, these defined components and dimensions give a repeatable framework, which helps produce consistent pocket door function across multiple cabinets using ALT-ST20-D360LL-28.
The inset pocket door system requires a minimum cabinet depth of 28-9/16 inches, which sets the case depth so the door can fully retract into the cabinet without bottoming out.
The kit supports doors from 78-3/4 inches to 94-1/2 inches tall, which defines the suitable door size band for designing tall cabinet or multimedia fronts around this hardware.
The 5-speed adjustable soft-closing dampers in this pocket door system let the installer set closing speed, which helps control door momentum and user feel in different cabinet applications.
The Sugatsune inset pocket door kit uses four slides, which support the door on multiple tracks for smoother travel and better stability along its full movement path.
This system is an inset pocket door kit, which means the door sits within the cabinet opening when closed, supporting flush-face cabinet designs.
The manufacturer part number is ALT-ST20-D360LL-28, which helps with precise specifying, ordering, and reordering of the same Sugatsune pocket door hardware setup.
The Sugatsune inset pocket door kit ALT-ST20-D360LL-28 provides a defined combination of four slides, 5-speed adjustable soft-closing dampers, and an inset layout, which helps streamline design decisions. With a 28-9/16 inch minimum cabinet depth and a door height range from 78-3/4 inches to 94-1/2 inches, the system gives clear boundaries for cabinet and door sizing. For projects needing pocket door hardware that retracts tall doors into deeper cases such as multimedia or workspace cabinets, this pocket door slides kit offers fixed, repeatable parameters that support consistent planning and installation.
Sold In: 1 Kit
