Sugatsune Inset Pocket Door Kit, Min. Cab. Depth 19-1/2", Door Height 31-1/2" - 47-1/4", 2-Slides, - ALT-ST20-D360S-19
Description
Sugatsune Inset Pocket Door Kit For Cabinet Use
Sugatsune inset pocket door kit lets a cabinet door slide back into the cabinet, freeing the opening while keeping the door concealed. This pocket door hardware is an inset system, so the door sits flush with the cabinet face when closed, supporting clean lines in multimedia or workspace installations. The kit is part of the Sugatsune America pocket door hardware range, giving installers a coordinated solution for cabinets in multimedia and workspace components. Minimum cabinet depth of 19-1/2 inches sets the carcass design, so casework can be planned around the slide travel without guesswork. The specified door height range of 31-1/2 to 47-1/4 inches defines the door size that can be used, helping match the system to medium-height cabinet fronts.
Key Pocket Door System Details For Projects
- The inset pocket door system is designed for cabinets, so the door retracts into the cabinet interior and clears the opening for access, useful for multimedia and workspace components where doors need to move fully out of the way.
- Two slides in the pocket door kit control the door travel, providing guided motion along both sides of the door so movement stays aligned with the cabinet opening during repeated use.
- A synchronized board links slide action, helping both sides of the door move together, which supports smoother motion and reduces racking in taller doors within the specified height range.
- Two hinges in the kit allow the door to pivot at the cabinet front before it slides back, so the door can open out and then retract, giving a combined hinge-and-slide movement pattern suited to pocket door cabinets.
- Two hinge mounting plates provide the interface between cabinet and hinges, setting hinge position on the cabinet structure so installers can locate and fasten the hinges consistently from cabinet to cabinet.
- A damper in the inset pocket door system works with the slides to control the soft-closing action, reducing abrupt door movement at the end of travel for quieter cabinet operation.
Cabinet Depth And Door Size Setup Details
The minimum cabinet depth of 19-1/2 inches means the cabinet interior must allow that depth to house the retracting door and slide system, guiding carcass layout in multimedia and workspace cabinetry. Door height compatibility from 31-1/2 to 47-1/4 inches sets a defined window for door sizing, so fabricators can cut doors to known dimensions that align with the pocket door slides and hinge geometry. This inset pocket door system works as part of a pocket door slides category, so it is intended for cabinets where doors need to slide back instead of swinging in front of equipment or work surfaces.
Using This Pocket Door Hardware In Cabinets
Where The Pocket Door System Is Applied
The inset pocket door system is suited to cabinets in multimedia and workspace components, where equipment or work areas sit behind doors that must clear fully when open. As part of the pocket door slides category, it serves installations where a traditional swinging door would interfere with screens, devices, or bench space. The minimum cabinet depth of 19-1/2 inches aligns with deeper cabinet bodies commonly used for electronics or workspace storage, so the retracting door can move fully inside the cabinet envelope. The stated door height range of 31-1/2 to 47-1/4 inches targets medium-height doors found on upper cabinets or tall base cabinets used in multimedia or workspace layouts.
How System Components Support Repeatable Motion
The 5-speed adjustable soft-closing dampers in the inset pocket door system allow the closing action to be tuned, so door motion can match the door size and weight within the stated height range, supporting controlled closing across different cabinet configurations. Two slides in the kit carry the door on each side, which helps maintain alignment during repeated openings and closings and supports stable movement when the door retracts into the cabinet. The synchronized board helps coordinate both slides, so the door tracks evenly and resists twisting as it moves. Two hinges and two hinge mounting plates define the pivot point at the cabinet front, providing a set geometry for how the door swings before sliding back, useful for maintaining consistent reveals from one cabinet to the next. The damper works with the slides to soften the final part of travel, which helps limit impact at the end of the closing stroke and contributes to quieter cabinet operation in multimedia and workspace environments.
Common Questions About This Pocket Door Kit
What type of pocket door system is this?
The inset pocket door system is designed so the door sits flush with the cabinet face when closed and then retracts inside, which suits clean-front multimedia and workspace cabinets.
What cabinet depth does this kit work with?
The kit is specified for a minimum cabinet depth of 19-1/2 inches, so the cabinet body needs that depth to house the retracting door and pocket door slides.
What door height range does the system support?
The pocket door kit supports doors from 31-1/2 to 47-1/4 inches in height, which fits many medium-height cabinet doors in multimedia and workspace installations.
How do the 5-speed adjustable soft-closing dampers help?
The 5-speed adjustable soft-closing dampers allow tuning of the closing speed, so door motion can be matched to the door size within the specified range for controlled closing.
What is the role of the synchronized board?
The synchronized board connects the two slides so both sides of the door move together, which helps keep the door square and reduces racking during travel.
What does manufacturer part ALT-ST20-D360S-19 indicate?
Manufacturer part ALT-ST20-D360S-19 identifies this specific Sugatsune inset pocket door kit, so specifiers can call out the exact pocket door hardware for projects.
Select This Pocket Door Kit For Cabinet Projects
The Sugatsune inset pocket door kit ALT-ST20-D360S-19 provides an inset pocket door system for cabinets built to a minimum depth of 19-1/2 inches and using doors 31-1/2 to 47-1/4 inches high. With two slides, a synchronized board, two hinges, two hinge mounting plates, a damper, and 5-speed adjustable soft-closing dampers, the kit establishes a defined motion path and closing behavior for multimedia and workspace cabinet doors. Selecting this pocket door hardware through Wurth Baer Supply connects projects to a Sugatsune America pocket door system suited to applications where doors need to retract fully inside the cabinet.