Sugatsune CHC-S Series 1" Diameter Cable Grommet, Zinc w/Black Finish, - CHC-S26BL

Sugatsune CHC-S Cable Grommet For Clean Cable Runs

Sugatsune CHC-S Series 1 inch cable grommet gives a defined passthrough point for cables in shelf, closet, garage, multimedia, and workspace projects, so wiring routes stay controlled instead of wandering through rough cutouts. This split cable grommet zinc black version uses a zinc body, which provides a solid-feeling metal edge around the cable opening, helping protect cable jackets from direct contact with raw panel material. The 1 inch diameter identity tells you the overall grommet size in the assembly, which helps when aligning it with other hardware on a panel or desktop. Its black finish visually matches dark surfaces in workspaces and media installations, so the opening blends instead of standing out. The product sits in the grommets class, so it is meant to finish and protect routed holes rather than act as structural support.

Key Details That Support Cable Management Work

• The Sugatsune CHC-S Series 1 inch diameter cable grommet defines a clear 1 inch sized passthrough, which helps installers plan consistent cable points across multiple panels or stations.
• The split cable grommet zinc black construction uses zinc, giving a rigid ring at the cable opening, which resists deformation during use and helps maintain a clean edge around the bore.
• The black finish on this cable grommet visually coordinates with dark furniture, closet systems, or multimedia cabinetry, which keeps the cable opening low profile in finished projects.
• The product is classified under multimedia and workspace components, tying its design to desks, media centers, and workspace furniture where organized cable routing matters for everyday use.
• Its role within shelf, closet, and garage organization connects the grommet to storage panels and organizers, helping route power or low-voltage lines through panels without exposing unfinished edges.

Mounting Fit Based On 7/8 Inch Bore Diameter

The bore diameter 7/8 inch grommet specification means the panel hole is sized at 7/8 inch, while the grommet itself is identified as 1 inch diameter, so the part nests into a tighter cutout and presents a slightly larger finished ring on the surface. This relationship between the 7/8 inch bore and 1 inch diameter grommet lets installers drill with a standard 7/8 inch bit for the opening, then press the grommet into place for a snug fit that covers any minor drilling variation around the edge. Because the product class is grommets, the intent is to sit in that bored opening and provide a finished cable path rather than fasten components together.

Using This Grommet In Storage And Multimedia Projects

Where This CHC-S26BL Grommet Is Typically Applied

This Sugatsune cable grommet zinc black sits in the multimedia and workspace components category, so it fits projects like desks, workbenches, and media cabinets where cables pass through horizontal or vertical panels. In shelf, closet, and garage organization settings, its 1 inch diameter identity suits panels that need a defined opening for charger cords, tool power leads, or network lines running between compartments. The bore diameter of 7/8 inch allows it to be used in relatively compact panel areas, helping keep the cable opening smaller while still providing a metal ring at the surface. As a grommet, its primary role is to finish the edge of that bored hole and guide cables, turning a basic drilled opening into a controlled passthrough point.

Why The Zinc Build And Bore Size Support Reliable Results

The split cable grommet zinc black design relies on zinc as the base material, giving this CHC-S26BL model a firm, stable rim that maintains the 1 inch diameter opening during regular cable movement, which helps keep wires from rubbing directly on panel edges. The specified bore diameter 7/8 inch provides a deliberate clearance relationship between panel hole and grommet body, so the fit is determined by known dimensions instead of trial-and-error drilling. This pairing of 1 inch grommet diameter with 7/8 inch bore simplifies layout when repeating the same cable pass-through across multiple panels in a project. The black finish also supports consistent visual results, because it frames the cable exit point with a dark ring that coordinates with other black workspace or closet components.

Common Questions About The CHC-S26BL Grommet

Select This Grommet For Defined Cable Pass-Throughs

The Sugatsune CHC-S Series 1 inch diameter cable grommet, zinc with black finish, provides a metal-rimmed passthrough sized around a 7/8 inch bore, aligning with shelf, closet, garage, multimedia, and workspace applications. Using the CHC-S26BL part number ties ongoing projects to a consistent opening size and appearance whenever a new cable route is needed.