Sugatsune CHC-S Series cable grommet gives you a dedicated pass-through point for cables, using a split design that lets conductors route through a fixed opening to keep runs organized in use. This Sugatsune America grommet is identified as CHC-S26DN, so matching it across drawings, projects, and reorders stays straightforward on repeat work. The part is classified under grommets in multimedia and workspace components, which aligns it with typical cable management in desks, cabinets, and equipment panels where a clean cable opening is needed. Its role within shelf, closet, and garage organization means it fits well into storage and utility layouts that need a defined cable path instead of rough-cut holes. Because the part is a cable grommet rather than a decorative plug, it is tailored to guiding cables through a controlled opening so edges stay defined around the bore.
The CHC-S26DN split cable grommet is referenced as 1 inch in diameter, so layout work can reference that dimension when marking hole centers on panels or tops. With a bore diameter of 7/8 in, the effective opening where cables pass is slightly smaller than the overall grommet size, which helps define how tightly the part frames the cutout in standard woodworking or panel work. The bore dimension gives installers a clear drilling target, since a 7/8 in opening aligns to the designed pass-through size for this Sugatsune America grommet. Because it belongs to the CHC-S Series, fit and appearance can be kept consistent across multiple openings on the same job by repeating the same series and bore combination wherever a similar cable route is needed.
This product is categorized under shelf, closet, and garage organization, so it suits storage runs, closet organizers, and garage systems that require a controlled cable or wire path through panels. Being also listed under multimedia and workspace components, the CHC-S26DN works naturally in desks, workstations, and media cabinets where equipment cords need to pass through tops or cabinet backs. The 1 inch diameter reference lets planners coordinate with panel layouts on furniture or built-ins, aligning openings across multiple locations. In cabinet or workspace construction that mixes power, data, or low-voltage runs, the grommet acts as the defined entry point, helping separate cable routes from general storage and maintaining a dedicated opening.
The bore diameter of 7/8 in sets a precise clearance for cables, so installers can match drill bits and cutting tools to that dimension for repeatable results from one panel to the next. Because the core material is zinc, the grommet body provides a stable surrounding edge for the bore, which helps the pass-through maintain its geometry during regular cable movement. The nickel finish brings a neutral, metallic appearance that coordinates with many hinge, pull, and frame finishes, allowing the cable opening to visually blend into furniture or organizational hardware runs. Identification as Sugatsune CHC-S Series with manufacturer part number CHC-S26DN gives shops a clear reference when standardizing on a specific cable grommet size across multiple projects or when documenting hardware schedules. Being classified within grommets for multimedia and workspace components clarifies that its role is focused on cable routing, so designers can assign it to openings that specifically handle cords rather than general ventilation or cutouts.
The Sugatsune CHC-S26DN cable grommet has a bore diameter of 7/8 in, so cable clearance is based on that dimension when planning drill sizes and cable bundles.
The CHC-S Series part is described as a 1 inch diameter cable grommet, so layout and spacing can be designed around that overall size on panels or tops.
The CHC-S26DN is specified as zinc, giving the grommet a solid metal body that supports the bore opening in typical furniture and cabinet environments.
This Sugatsune America cable grommet uses a nickel finish, aligning its appearance with common metallic hardware used in cabinetry, desks, and storage systems.
The product is categorized for shelf, closet, and garage organization and for multimedia and workspace components, so it suits storage, media, and workstation cable openings.
This grommet is part of the Sugatsune CHC-S Series and carries manufacturer part number CHC-S26DN, which supports matching and reordering across projects.
The Sugatsune CHC-S Series 1 inch diameter cable grommet in zinc with a nickel finish gives you a defined 7/8 in bore for cable pass-throughs in multimedia and organizational projects. Using the CHC-S26DN part number with Wurth Baer Supply ties your hardware schedule to a consistent, metal-bodied grommet that aligns with shelf, closet, garage, and workspace components. Adding this split cable grommet to your plan helps standardize cable openings across desks, cabinets, and storage systems where a controlled, repeatable cable route is required.