Sugatsune ESR-DC4513 Series 16" Full Extension Ball Bearing Drawer Slides w/Hold-in Detent, Unhanded Side Mount Stainless Steel, Sold in Pairs, - ESR-SC4513-16
Description
Sugatsune 16 Inch Stainless Drawer Slides For Smooth Access
Sugatsune 16 inch stainless drawer slides are side mount, full extension ball bearing drawer slides that let the drawer travel its full length, giving clear access to stored items in cabinets or pull-out components. The slides use ball bearings, which support smooth, consistent motion under load, helping drawers open and close with less effort in repeated-use environments. These slides are part of the ESR-DC4513 Series, so they follow a defined design family that supports consistent selection across related sizes in the same project run. Each slide is unhanded, meaning the same slide design works on either drawer side, which simplifies ordering and layout because there is no left or right version to track. A hold-in detent feature keeps drawers retained at the closed position until pulled open, which helps drawers stay shut in normal use. Construction in 304 stainless steel supports corrosion resistance in typical woodworking, shop, or utility cabinet conditions, which matters where moisture or cleaning cycles are present.
Key Drawer Slide Details That Support Daily Use
- The ESR-DC4513 Series design identifies these as full extension ball bearing drawer slides, which allows drawers to extend completely so contents at the back are reachable during regular operation.
- Side mount configuration places each slide on the drawer sides, which keeps the drawer bottom unobstructed and can simplify cabinet construction where standard side clearances are planned.
- The 16 inch length defines the intended drawer depth these slides support, which helps align cabinet design, runner setback, and carcass depth during layout and construction work.
- Unhanded construction means the same ESR-SC4513-16 slide fits either side of the drawer, which reduces part variety on the job and streamlines installation steps for repeat cabinet builds.
- The hold-in detent feature retains the drawer at the closed position, which helps drawers stay seated when fronts are flush with face frames or panels during normal open-and-shut use.
- Use of ball bearings inside the slides supports smooth linear movement, which is valuable on drawers that see frequent cycling in shop, residential, or commercial cabinetry.
Mounting And Screw Details For Installation Workflow
These ESR-SC4513-16 slides mount with M4 or #8 binding, pan, or truss head screws, giving installers flexibility to match screw type to cabinet material and shop standards while staying within the specified head styles. The side mount, ball bearing slide configuration fits cabinets designed for slides on the drawer sides, which suits many face-frame and frameless layouts that already anticipate this mounting style. Front disconnect capability allows the drawer to separate from the slide at the front, which can simplify installing drawers into cabinets and later removal for service, finishing, or adjustment work. Because the slides are made of 304 stainless steel, they bring corrosion resistance that supports longer service in environments where drawer hardware is exposed to humidity, occasional moisture, or cleaning routines.
How These Sugatsune Slides Fit Real Projects
Where ESR-DC4513 Stainless Slides Are Typically Used
These side mount, ball bearing drawer slides sit in the Side Mount Drawer Slides product class, aligning them with cabinets and casework that use side-mounted hardware for pull-out storage. At 16 inches long, they match drawer boxes and cabinet depths built around that slide length, which is common for many mid-depth base cabinets and utility pull-outs. The use of 304 stainless steel supports applications where hardware may contact moisture, such as work areas that experience regular cleaning or damp shop conditions. Full extension travel allows the drawer to move completely out of the cabinet opening, providing visual access and reach to items stored toward the back of the drawer. The hold-in detent at the closed position helps these drawers stay seated when fronts align flush with surrounding panels, which supports clean front alignment in finished installations. Because the slides are unhanded, the same ESR-SC4513-16 part can serve both left and right drawer sides across a run of cabinets, which can reduce part sorting and help maintain consistent hardware selection on job sites.
Why ESR-SC4513-16 Design Details Support Repeatable Results
The Sugatsune ESR-SC4513-16 uses full extension ball bearing construction, which supports smooth, predictable travel each time the drawer is cycled, helping installers achieve consistent feel across multiple drawers in a bank. Front disconnect design lets drawers be fitted to the slides outside the cabinet, then engaged at the front during installation, which can speed assembly and aid alignment of fronts with surrounding doors or panels. Mounting with M4 or #8 binding, pan, or truss head screws offers defined options, so installers can select from common screw sizes and head types that sit properly in the slide holes while working in hardwood, plywood, or engineered panels. The 304 stainless steel material provides resistance to corrosion, which supports slide function over time in environments where steel hardware might otherwise deteriorate. Being part of the ESR-DC4513 Series supports consistent selection when projects require multiple slide lengths with the same functional features, which can simplify design standards. The hold-in detent at the closed position adds a defined closing feel that keeps drawers resting flush when not in use, which can improve the finished appearance of cabinets and reduce nuisance movement under normal conditions.
Common Questions About ESR-DC4513 Drawer Slides
What type of drawer slide is the ESR-SC4513-16?
The ESR-SC4513-16 is a Sugatsune ESR-DC4513 Series side mount, full extension ball bearing drawer slide, so it supports smooth, full-travel drawer movement along the drawer sides.
What material are these Sugatsune ESR-DC4513 slides made from?
These ESR-DC4513 Series slides are made of 304 stainless steel, which offers corrosion resistance useful in cabinets installed in damp or regularly cleaned environments.
How long are the ESR-SC4513-16 drawer slides?
The ESR-SC4513-16 slides are 16 inches long, aligning with drawer boxes and cabinet depths designed around that slide length for proper extension and support.
How do these drawer slides mount to the cabinet?
These slides are side mount units that attach along the drawer sides and cabinet walls using M4 or #8 binding, pan, or truss head screws specified for the ESR-DC4513 design.
What does the hold-in detent feature do on these slides?
The hold-in detent on these slides retains the drawer at the closed position, helping the front stay seated and visually aligned with surrounding cabinetry until pulled open.
Why is front disconnect useful on ESR-DC4513 Series slides?
Front disconnect on the ESR-DC4513 Series lets installers remove or attach drawers from the front, which supports easier installation and later service or finishing work.
Select ESR-SC4513-16 Slides For Stainless Side Mount Builds
The Sugatsune ESR-SC4513-16 16 inch full extension ball bearing drawer slide offers front disconnect, hold-in detent, and side mount installation in 304 stainless steel, aligning with projects that need smooth, full-travel drawers in demanding cabinet environments. With unhanded construction and mounting that uses M4 or #8 binding, pan, or truss head screws, it supports straightforward hardware standardization across a job. For cabinet, casework, or pull-out storage built around 16 inch side mount slides, this ESR-DC4513 Series model provides a clearly defined option for consistent function and material performance.