Sugatsune ESR-DC4513 Series 18" Full Extension Ball Bearing Drawer Slides w/Hold-in Detent, Unhanded Side Mount Stainless Steel, Sold in Pairs, - ESR-SC4513-18

Sugatsune ESR-DC4513 Drawer Slides For Smooth Travel

Sugatsune ESR-DC4513 drawer slides are 18 inch full extension ball bearing side mount slides that let drawers open their full length so stored items are easy to reach along the entire drawer box. The side mount design positions the slides on the drawer sides, which keeps the cabinet interior clear for straightforward carcass construction. The ball bearing mechanism supports smooth, consistent motion under load, which helps drawers feel precise on repeated openings in daily use. These slides are made of 304 stainless steel, giving the slide members corrosion resistance in normal interior environments where moisture or cleaning is present. A hold-in detent feature resists unintended opening at the closed position, which helps drawers stay shut when fronts are flush with surrounding facades. The slides are unhanded, so the same member works on left and right, which simplifies stocking and layout on the bench.

Key Slide Details That Support Cabinet Builds

• The full extension travel lets the 18 inch drawer slide open to its rated length, which allows installers to access the back of the drawer without redesigning cabinet depth.
• The side mount configuration sets the slides on the cabinet sides, which fits common frameless or face frame drawer layouts where side clearance is planned in the box sizing.
• The ball bearing action provides guided movement along the slide members, which helps drawers operate smoothly when opened and closed multiple times during normal service.
• The hold-in detent engages at the closed position and adds resistance to movement, which helps the drawer front stay seated against the cabinet when at rest.
• The 304 stainless steel construction resists corrosion from normal indoor humidity and cleaning, which supports long-term service where metal parts are exposed inside the cabinet.
• The unhanded design uses the same slide profile on both sides of the drawer, which reduces part complexity and speeds layout during production or retrofit work.

Side Mount Installation And Screw Interface Details

These drawer slides mount on the side of the drawer and cabinet, which lines up with standard side-clearance planning in typical cabinet joinery. The slides fasten using M4 or #8 binding, pan, or truss head screws, so installers can match screw style to their preferred driving tools and substrate while keeping head profiles compatible with the slide holes. That screw flexibility allows the slide to seat properly against wood or composite cabinet sides without distortion of the slide members, which supports consistent movement after installation. The front disconnect feature lets the drawer member release from the cabinet member, which simplifies setting drawer boxes on the slides, adjusting reveals, and removing drawers for service or finishing work.

Using These Slides In Cabinet And Drawer Projects

Where These Stainless Drawer Slides Are Applied

These 18 inch full extension slides fit drawer boxes sized for side mount ball bearing hardware where the cabinet depth matches the slide length. Their side mount design suits standard cabinet construction in shops that build with face frames or frameless carcases using side clearance to size drawer widths. The 304 stainless steel material suits interior locations where metal components may contact moisture during normal cleaning, such as in kitchens or work areas where damp cloths are used. Because the slides are unhanded, they can be used on either side of the drawer with the same part, which is helpful on runs of cabinets where identical slides are installed across multiple drawers.

Details That Support Repeatable Drawer Performance

The full extension ball bearing design lets the drawer travel out to the full 18 inch length, which provides clear access to stored items at the back and reduces the need to oversize cabinet depth for reach. Ball bearings guide the motion of the members, which helps drawers start moving smoothly and track straight through the stroke. The hold-in detent at the closed position adds resistance when the drawer is nearly shut, which helps keep fronts aligned with adjacent doors or fronts once positioned. Mounting with M4 or #8 binding, pan, or truss head screws allows the screw head to seat properly in the slide holes, which supports firm attachment without deforming the slide profile. The front disconnect capability lets installers remove the drawer member from the cabinet member without tools, which speeds finishing operations, adjustments to drawer front alignment, and later access to the cabinet interior when other hardware or electrical work is required.

Common Questions About ESR-SC4513-18 Slide Use

Select Sugatsune ESR-DC4513 Slides For Your Build

The Sugatsune ESR-DC4513 drawer slides combine 18 inch full extension travel, ball bearing motion, and 304 stainless steel construction, giving cabinet makers a side mount option suited to everyday drawer use. The unhanded design and front disconnect feature streamline installation on production runs where multiple drawers are fitted to a single cabinet line. With mounting holes sized for M4 or #8 binding, pan, or truss head screws, these slides integrate easily into common shop workflows. For projects that call for full access drawer travel and corrosion-resistant slide members, this ESR-SC4513-18 model aligns well with professional cabinet and casework builds.