Wood veneer edgebanding pre-glued alder gives cabinet and furniture projects a matching alder edge, so raw panel edges turn into a continuous wood surface that looks finished and ready for use. This FormWood edge banding is made as wood veneer edgebanding, so the visible edge presents real wood rather than a synthetic overlay, which matters when matching alder faces in shops focused on consistent appearance. The strip is 0.034 inch thick, giving a workable balance between flexibility and edge presence, useful when trimming flush on typical woodworking equipment. The 13/16 inch width covers standard board thicknesses with room to trim, helping reduce visible glue lines at the edge. Supplied as a 250 foot roll, this length supports longer production runs or multiple jobs without changing rolls as often.
This FormWood wood veneer edgebanding, pre-glued alder, uses a 13/16 inch width so the strip overhangs both faces of a typical 3/4 inch panel, giving room to trim both sides for a precise edge. The 0.034 inch thickness means the edge conforms readily to straight panel edges, which supports smooth trimming and sanding sequences. The pre-glued backing keeps adhesive consistently applied along the 250 foot roll, so each length of edging presents the same bonding layer, helping maintain uniform results across multiple pieces on a job.
This wood veneer edgebanding, pre-glued, alder, is suited to edging panels where alder is the visible species, so casework, fronts, or shelves present the same wood at the edge as on the face. The 13/16 inch by 250 foot roll format gives enough length for runs of cabinets or furniture components, making it practical for shop environments handling repeated alder work. The wood veneer construction keeps the edge surface consistent with alder parts, which matters when aligning grain direction visually from panel to edge on higher-visibility areas.
The 0.034 inch thick profile of this FormWood alder edgebanding provides enough material to present a solid wood edge while remaining thin enough to trim flush without heavy passes, which helps produce smooth joints at the panel edge. The 13/16 inch width offers coverage beyond the board thickness, allowing both sides to be trimmed back to the panel for a straight, clean line that supports uniform reveals on doors and casework. With 250 feet on a single roll, shops can edge multiple cabinet boxes or sets of fronts from one roll, supporting consistent appearance and workflow on alder-based projects.
The wood veneer edgebanding, pre-glued alder, is 13/16 inch wide and supplied in a 250 foot roll, supporting extended edging runs on alder-based projects.
The FormWood wood veneer edgebanding is 0.034 inch thick, giving a slim wood edge that trims and sands to a smooth transition at the panel face.
This product is wood veneer edgebanding in alder, so the exposed edge shows alder wood, helping match alder cabinet or furniture components.
The pre-glued alder edge banding has adhesive already applied to the back, so the user works with a single material that combines veneer and glue layer.
The manufacturer part number is PGALD13/16, which identifies this specific pre-glued alder wood veneer edgebanding from FormWood.
The 13/16 inch width extends beyond typical 3/4 inch panels, allowing a slight overhang that can be trimmed back for a straight, flush finished edge.
Choose this FormWood wood veneer edgebanding, pre-glued, alder, 0.034 inch thick and 13/16 inch by 250 foot roll, when alder-faced panels need a matching alder edge with enough width to trim cleanly on both sides. The combination of pre-applied adhesive, wood veneer construction, and extended roll length supports steady production work on alder cabinetry or furniture where consistent edges matter.
Sold In: 1 Roll