13/16 Fleece Pre-Glued Cherry describes a FormWood edge banding that combines cherry wood appearance with a pre-applied glue layer, so you can apply it to panel edges in one heating step without handling separate adhesive. The 13/16 inch width gives coverage for typical cabinet and furniture panel edges, helping you hide exposed cores and present a finished cherry look. As a wood edgebanding and surfacing product, it supports projects where raw sheet material needs an applied cherry edge to visually match the face. The fleece backing sits between the cherry surface and the glue, which supports consistent bonding across the length of the edge. The PGCHE13/16 part number identifies this specific cherry, fleece-backed, pre-glued banding, so you can reorder the same material when standardizing across a job.
This 13/16 inch FormWood edge banding is sized so installers can center it on the panel edge, apply heat to activate the pre-glued backing, and then trim the slight overhang. The pre-glued cherry banding design supports a continuous workflow, because the adhesive is part of the product and ready to bond when heated. The fleece layer under the glue helps the banding settle against minor surface variation along the edge, which supports a more consistent bond line. As an edge banding and surfacing component, it is suited to operations where covering raw panel edges with a cherry look is part of the standard build sequence.
As an edgebanding and surfacing product in the wood edgebanding class, this 13/16 Fleece Pre-Glued Cherry banding fits applications where exposed panel edges need a cherry finish to align with the rest of the assembly. On cabinet boxes built from sheet goods, the cherry banding lets you convert raw edges into a cherry-style front that visually ties to cherry fronts and faces. In furniture or casework, the 13/16 inch width gives a working margin on typical thicknesses, so fabricators can run a final trim pass and still keep full coverage. The PGCHE13/16 identifier connects field use back to a defined specification, which helps shops match existing installations on repeat orders or later additions. Within shops that standardize on wood edgebanding, this cherry option aligns with cherry projects in the same workflow.
The pre-glued construction on this FormWood cherry banding concentrates both the wood surface and adhesive into a single step, which can simplify edge application sequences compared to separate glue systems. With the adhesive carried on the back, heating the 13/16 Fleece Pre-Glued Cherry banding activates bonding over its full width at once, supporting even adhesion along long cabinet runs. The fleece backing supports the glue film, which helps the strip maintain contact along minor highs and lows in the panel edge, reducing areas that might otherwise bond unevenly. Because the banding is clearly identified as PGCHE13/16 and categorized under edgebanding and surfacing, it slots logically into material lists where specific edge treatments must be repeatable job to job. For installers and fabricators, these combined details support a more predictable cherry edge finish when applied across multiple cabinets or fixtures.
13/16 Fleece Pre-Glued Cherry describes a FormWood edge banding with a cherry appearance, a fleece backing, and a pre-applied glue layer sized at 13/16 inch width for panel edges.
The pre-glued cherry banding carries its own adhesive on the back, so installation uses heat activation on the banding itself, streamlining edge work into a single material step.
The 13/16 inch width gives coverage beyond common panel thicknesses, allowing installers to center the strip, bond it, and trim flush while fully covering the exposed edge.
The fleece backing supports the glue layer and helps the banding conform to the panel edge, promoting an even bond across the full length of the applied cherry strip.
The FormWood PGCHE13/16 part number identifies this exact 13/16 Fleece Pre-Glued Cherry banding, helping shops reorder the same edge treatment for consistent cherry projects.
This cherry edge banding provides a cherry-looking edge to align with cherry-faced panels, letting fabricators turn raw panel edges into finished cherry fronts on cabinets or furniture.
The 13/16 Fleece Pre-Glued Cherry edge banding from FormWood offers a cherry appearance, fleece backing, and pre-applied adhesive in one defined PGCHE13/16 product. For projects using cherry-faced panels where exposed edges need a matching finish, this edgebanding and surfacing option gives a straightforward way to add a cherry edge treatment while following a repeatable workflow. When a job calls for cherry-style wood edgebanding at 13/16 inch width, this FormWood banding is designed to fill that role along cabinet and casework edges.
Sold In: 1 Roll