Wood veneer edgebanding hickory from FormWood is a pre-glued edge banding designed to finish and protect exposed panel edges with a matching hickory surface. The edgebanding is described as wood veneer, so it provides a real-wood edge that visually ties in with hickory panels or components on cabinets and furniture. The product is identified as 0.034 inch thick, giving a substantial veneer layer that can be worked during trimming and light sanding without cutting straight through to the substrate. The 13/16 inch width covers common panel thicknesses while allowing a bit of overhang for flush trimming along both faces. A 250 foot roll length supports longer production runs or multiple installations from one roll, reducing changeovers during jobs. The pre-glued description indicates adhesive is already applied to the back, streamlining edge application steps where heat-activated adhesive is appropriate.
This FormWood wood veneer edgebanding is specified at 13/16 inch width and 0.034 inch thickness, so it is suited for edging applications where that width slightly exceeds the panel thickness and can be trimmed back for a flush finish. The pre-glued description indicates the adhesive layer is factory-applied to the back of the banding, so installation steps focus on heating and pressing the strip to appropriately prepared panel edges rather than spreading separate glue. The 250 foot roll format feeds consistently through edge-banding setups designed around roll stock, supporting repeatable passes along cabinet sides, shelves, and doors that share the same hickory finish.
This wood veneer edgebanding, identified as hickory and classified as edge banding, is suited for projects that use hickory-faced sheet goods or components in cabinetry, furniture, or other wood assemblies. The hickory designation means the visible edge presents a wood species that coordinates with hickory surfaces in the rest of the build. Because the banding is 13/16 inch wide, it aligns well with panel-based construction where the edge is slightly narrower than the banding and can be trimmed for a precise fit. The 250 foot roll length supports runs of multiple cabinet boxes, shelves, or doors within a single project, helping maintain consistent appearance on all exposed edges that call for a matching hickory veneer.
The 0.034 inch thickness of this FormWood edgebanding provides a veneer layer sized for clean trimming while maintaining a wood surface at the edge. That thickness allows installers to use edge trimmers or flush bits to refine the edge without cutting directly through the veneer on the first pass. The pre-glued design concentrates the adhesive in a uniform layer on the back of the strip, so the bond line is consistent along the length of the 250 foot roll when proper heat and pressure are applied. With its 13/16 inch width, the banding gives a bit of extra material beyond standard panel thicknesses, which supports controlled trimming for square, chip-free edges on cabinet sides, shelves, or doors using hickory veneer faces.
This PGHIC13/16 edgebanding is described as wood veneer hickory, so the exposed edge presents a real-wood hickory surface that visually coordinates with hickory panels.
The FormWood wood veneer edgebanding is 13/16 inch wide, giving coverage for typical panel edges with extra width for trimming to a flush, clean line.
This pre-glued hickory edgebanding is 0.034 inch thick, providing a veneer layer that can be trimmed and lightly finished while maintaining a hickory surface.
The PGHIC13/16 hickory edgebanding is supplied as a 250 foot roll, supporting multiple cabinets or longer runs from a single roll length.
This hickory edge banding is described as pre-glued, meaning the adhesive layer is factory-applied to the back, so application uses that existing glue when heated and pressed.
The wood veneer edgebanding is from FormWood, which identifies the manufacturer behind this hickory PGHIC13/16 edge banding product.
The FormWood wood veneer edgebanding, hickory, 0.034 inch thick and 13/16 inch wide in a 250 foot roll, provides a species-matched edge solution for hickory projects. The pre-glued back simplifies application wherever heat-activated veneer banding fits the workflow. With its defined width, thickness, and hickory veneer face, this PGHIC13/16 roll supports building cabinet and furniture edges that visually align with hickory surfaces across the project. Use this edgebanding when a hickory wood veneer edge and roll format match the job requirements.
Sold In: 1 Roll