Wood veneer edgebanding hickory from FormWood provides a hickory veneer strip designed to finish exposed panel edges so they visually match surrounding hickory surfaces. This edge banding has a 0.034 inch thickness, which gives a substantial wood layer that can be trimmed and flushed for a more solid-feeling edge on cabinets, shelving, or furniture work. The 7/8 inch width covers common panel thicknesses with a bit of overhang, which helps during trimming and reduces the chance of a visible substrate line. The roll length of 250 feet suits production runs or multiple installations, supporting consistent color and grain along all treated edges. A pre-glued construction is built into this edgebanding, so heat-activation can bond it along the panel edge in one pass, supporting steady workflow on site or in the shop.
This FormWood wood veneer edgebanding is pre-glued, so heat activates the adhesive layer on the back of the strip during installation. That pre-applied adhesive turns the edgebanding and bonding step into one operation, which streamlines edge preparation on panel runs. The 7/8 inch width gives extra coverage around typical board thicknesses, allowing the banding to be centered and then trimmed back to the panel faces for an even edge. With a 0.034 inch thickness, the veneer provides enough material for careful trimming and dressing without feeling overly fragile, supporting a smooth finished edge on hickory-faced cabinetry or furniture components.
This wood veneer edgebanding, pre-glued, hickory, 0.034 inch thick, 7/8 inch x 250 foot roll is suited to projects using hickory surfaces where exposed panel edges need a matching wood face. The real hickory veneer allows cabinet boxes, shelving, or furniture carcasses to visually match hickory doors or drawer fronts when applied to raw edges. The 7/8 inch width gives coverage for edges on typical panel constructions, so installers can work confidently across different case parts while keeping the same roll in use. With 250 feet in a roll, production shops can edge multiple cabinet units or longer shelving runs with a single product, helping keep appearance uniform from piece to piece. The FormWood branding signals that this product sits within a dedicated edgebanding and surfacing range, giving shops a repeatable source for hickory veneer edging by the same manufacturer part number, PGHIC7/8.
The 0.034 inch thick hickory veneer layer provides a balance between flexibility and substance, which supports bending around standard straight edges while still leaving enough material for final trimming and minor touch-sanding. That thickness also helps the edge feel more like solid wood when finished, which can be important when matching hickory faces on cabinetry. The 7/8 inch width offers installers room to position the strip with slight overhang on both sides, which simplifies alignment and trimming, especially when running multiple edges in sequence. Because the edgebanding is pre-glued, the adhesive is already applied to the back, so heat fuses the strip directly to the panel and removes a separate gluing step from the workflow. On repeated production or on-site work, that pre-glued approach can shorten each edging cycle and support consistent bond lines along the length. Identifying the product by manufacturer part PGHIC7/8 gives shops a clear reference when standardizing materials for hickory-edged casework.
This FormWood wood veneer edgebanding roll is 7/8 inch wide, 0.034 inch thick, and 250 feet long, which suits edging multiple hickory-faced panels in one project or across several jobs.
This hickory edgebanding is pre-glued, with adhesive already on the back, so heat activates the bond during application, combining placement and gluing into a single step for each edge.
The 0.034 inch thickness provides a workable hickory veneer layer that can be trimmed and dressed after bonding, supporting smooth, solid-feeling edges that align with adjacent hickory surfaces.
This hickory wood veneer edgebanding is suited to finishing exposed edges on hickory cabinetry, shelving, and furniture panels so they visually coordinate with hickory doors and fronts.
The PGHIC7/8 part number identifies this specific FormWood wood veneer edgebanding, pre-glued, hickory, 0.034 inch thick, 7/8 inch x 250 foot roll for ordering and repeat use.
The 7/8 inch width provides overhang on standard panel edges, giving room to center the strip and trim both sides back flush, which supports clean, even hickory edges.
This FormWood wood veneer edgebanding, pre-glued, hickory, 0.034 inch thick, 7/8 inch x 250 foot roll gives installers a defined hickory edging solution that aligns with hickory-faced cabinetry or furniture. The real hickory veneer, set at 0.034 inch thickness, supports trimming and dressing to a smooth finished edge. With a 7/8 inch width and pre-applied adhesive, the strip covers standard panel edges while simplifying the bonding step into one heated pass. For shops and serious DIY users working with hickory surfaces, selecting the PGHIC7/8 edgebanding through Wurth Baer Supply ties edge treatment to a consistent, repeatable material.
Sold In: 1 Roll