Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
solid wood edgebanding hickory from FormWood finishes exposed panel edges in the same species as your hickory surfaces, so cabinet sides, shelves, and door edges present a unified appearance on finished work. This product is described as solid wood edgebanding, meaning the face material is wood rather than a printed or plastic layer, which lets you sand and finish it along with surrounding hickory components. The 15/16 inch width covers standard panel thicknesses stated in the description, giving a slight overhang for trimming and flush finishing on typical cabinet and furniture projects. A 500 foot roll length keeps long runs of casework, shelving, or multiple jobs supplied from a single roll, which reduces time spent changing material during production. The non glued construction noted in the description lets shops use their preferred edgebanding adhesive system for process control.
The 15/16 inch stated width on this hickory solid wood edgebanding gives extra coverage beyond typical 3/4 inch panels, so installers can align the banding and then trim both faces flush for a clean edge line. The non glued construction requires a separate adhesive during installation, which lets shops align glue choice with their existing hot-melt, PVA, or contact-bonding methods. The 500 foot roll format supports continuous feeding through edgebanding equipment or repeated manual applications on smaller jigs, keeping material handling straightforward. Because the description specifies solid wood edgebanding, the applied edge can be sanded and finished along with the main panel surface, aiding in consistent color and sheen across the project perimeter.
This solid wood edgebanding, identified as hickory and classified as edge banding, is suited to closing off exposed substrate edges on cabinets, furniture, and shelving built with hickory faces. The 15/16 inch width noted in the description works with common panel sizes in woodworking, giving enough overhang above and below the face to allow clean trimming on both sides. The 500 foot roll length serves production shops building multiple units in hickory, because one roll can run through many cabinet sides, tops, and shelves before replacement. Since the web description highlights hickory as the face species, the applied strip can be sanded and finished in line with matching hickory doors, face frames, or veneered panels to maintain project consistency.
The manufacturer part number NGHIC15/16 and the SAP description stating 15/16 inch fleece non glued hickory give a precise identifier, helping shops reorder the same species, width, and backing when a particular setup is dialed in. The fleece reference in the description indicates a backed construction designed for bonding, which supports reliable adhesion when paired with a compatible glue system in standard edgebanding processes. The non glued wording means adhesive is added during application, so line settings can be tuned around glue spread, dwell, and temperature without working against a pre-applied layer. The 500 foot roll, as specified, supports extended production runs at fixed feed speeds, which helps maintain consistent trim quality and sanding passes from one cabinet or panel edge to the next.
This FormWood product is described as solid wood edgebanding in hickory, so the face material is wood, allowing sanding and finishing to align with surrounding hickory components.
The NGHIC15/16 hickory edgebanding is specified at 15/16 inch wide, providing coverage past typical 3/4 inch panels for trimming to a flush, clean edge.
The hickory wood edge banding roll is stated at 500 feet long, supporting extended cabinet or casework runs before a roll change is needed.
This hickory edgebanding is described as non glued, so adhesive is applied during installation, aligning the process with the shop's chosen glue system.
The SAP description notes fleece non glued hickory, indicating a fleece-backed construction that supports bonding when used with a suitable edgebanding adhesive.
This 15/16 inch hickory edgebanding is identified under the FormWood brand, tying it to a manufacturer focused on wood surfacing and edgebanding products.
The FormWood solid wood edgebanding, described as hickory in a 15/16 inch by 500 foot roll, aligns with cabinet and woodworking projects that use hickory faces and need matching edges. The non glued, fleece-backed construction referenced in the description supports bonding with a shop-chosen adhesive system and standard edgebanding workflows. When a project calls for hickory edge treatment that sands and finishes like the surrounding wood, this NGHIC15/16 roll from Wurth Baer Supply provides the stated species, width, and length in a single, production-ready format.
Sold In: 1 Roll