FormWood Hickory Wood Veneer Edgebanding 7/8", Unfinished, 500', NGHIC7/8

Wood Veneer Edgebanding Hickory Roll For Clean Edges

Wood veneer edgebanding hickory from FormWood is a hickory edge banding solution that finishes exposed panel edges with matching real wood veneer. The 0.022 inch thick construction creates a substantial face at the edge, which supports consistent trimming and profiling on cabinets, furniture, and panels. The 7/8 inch width covers typical 3/4 inch sheet stock with room for flush-trimming, helping installers run clean lines without revealing core material. A 500 foot roll length supports longer runs and repeat jobs from a single roll, which reduces changeovers on site or in the shop. This NGHIC7/8 hickory edgebanding presents a continuous veneer grain along edges, helping projects maintain a unified appearance from face to edge.

Key Hickory Edgebanding Details For Shop Use

• The FormWood hickory edge banding construction uses wood veneer, which lets edges take stain and clear finishes in line with hickory faces for visual continuity on cabinetry and casework.
• The 0.022 inch thick wood veneer edgebanding profile gives enough material for trimming and light profiling, which supports clean transitions from sheet face to edge after machining.
• The 7/8 inch width is sized for common 3/4 inch panels with overhang, which gives installers working room for flush-trimming without risking exposure of the core at the finished edge.
• The 500 foot roll length supplies extended edging capacity, which helps production shops and serious DIY users handle multiple cabinets or larger projects from one continuous roll.
• The NGHIC7/8 part number identifies this specific 7/8 inch hickory non glued edgebanding, which helps buyers match this roll with drawings, cut lists, or repeat orders.

Non Glued Hickory Edgebanding For Flexible Application

This 7/8 inch FLEECE NON-GLUED HICKORY edgebanding gives installers a non glued back, which allows the use of separate adhesive systems suited to their process. That flexibility helps users align the edgebanding with shop-standard glues or presses. The fleece backing reference in the description indicates a backing preparation on the veneer, which supports bonding when used with appropriate adhesive systems in typical edgebanding setups. Because the product is supplied as a 500 foot roll, it can be fed through standard edgebanders designed for veneer banding in roll form, which supports continuous application across cabinet runs and panel batches.

Using FormWood Hickory Edge Banding In Projects

Where This 7/8 Inch Hickory Roll Fits Best

This wood veneer edgebanding, hickory, 0.022 inch thick 7/8 inch x 500 foot roll, fits edge treatment tasks on cabinets, casework, and furniture built from sheet goods where hickory is the chosen species. The 7/8 inch width works with 3/4 inch substrate edges commonly used in cabinet construction, leaving a small margin for final flush-trimming along the length of the panel. The hickory veneer face lets the installed band resemble solid hickory at the edge, which is useful when matching hickory doors, drawer fronts, and face frames. Because the roll is 500 feet long, it supports multi-cabinet projects and sequences of shelves, gables, and tops without frequent roll changes, which suits production lines and organized home shops.

Details That Support Consistent Edgebanding Results

The 0.022 inch thick FormWood wood veneer edgebanding profile provides a defined edge surface, which helps trimming tools track cleanly and reduces the likelihood of cutting through to the substrate during finishing passes. The non glued configuration lets shops standardize on their preferred glue spreaders, hot-melt systems, or press methods, which can streamline workflow when different materials share the same equipment. The 7/8 inch hickory edge banding roll dimension gives consistent coverage across panels of the same thickness, supporting repeatable setup on edgebanders and trimming stations. With a continuous hickory veneer along 500 feet, installers can keep grain and color character consistent around cabinet boxes and shelves, which matters when visible edges run together in a finished installation.

Common Questions About NGHIC7/8 Hickory Edgebanding

Select This Hickory Edgebanding For Matching Edges

This FormWood wood veneer edgebanding, hickory, 0.022 inch thick 7/8 inch x 500 foot roll, gives cabinet shops and serious DIY builders a hickory solution for finishing exposed panel edges. The 7/8 inch width and 0.022 inch thickness support clean trimming around 3/4 inch substrates, while the non glued hickory veneer construction aligns with adhesive systems already used in many woodworking setups. For projects built around hickory panels or components, this NGHIC7/8 roll from Wurth Baer Supply offers a consistent way to carry the species look across every visible edge.