FormWood Mahogany PSA veneer sheet provides a 48x96 wood veneer surface that lets you apply a mahogany face to panels in the wood veneer sheets category. This PSA back wood veneer sheet uses a pressure-sensitive adhesive backing so you can bond the sheet to properly prepared substrates without separate adhesive application equipment, which can streamline panel surfacing on a job. The mahogany species face aligns with projects that call for this wood appearance in edgebanding and surfacing work. The 4X8 dimension, shown as 48x96, matches common panel sizes, so installers can cover cabinet or fixture components with fewer seams to trim. The A GRD designation in the SAP description identifies a graded face, which supports consistent surface selection where appearance matters. FormWood branding ties this sheet to a manufacturer focused on wood veneer sheets, giving you a clearly identified product line in the shop.
This PSA back wood veneer sheet uses a pressure-sensitive adhesive backing, so installation consists of positioning the 48x96 sheet on the substrate and applying pressure to bond it, rather than spreading separate adhesive, which can tighten shop workflows. The 4X8 format works with standard panel dimensions, so fabricators can size components around the sheet to minimize joints and reduce trimming passes. As part of the edgebanding and surfacing veneer sheets category, this sheet fits directly into panel surfacing steps in cabinetry or woodworking assemblies, providing a defined step in your production sequence.
This FormWood mahogany 48x96 PSA back wood veneer sheet fits applications within edgebanding and surfacing where a wood veneer sheet is required. The 4X8 format supports use on cabinet sides, doors, and casework panels that are sized around standard sheet goods, helping align veneer layout with existing cut plans. As a member of the wood veneer sheets product class, this sheet serves as the primary decorative surfacing layer in assemblies, allowing you to bring a mahogany face to plywood or composite cores. The mahogany veneer surface supports use on furniture components, fixture panels, and architectural millwork where this species is part of the design palette. Within veneer sheets, the PSA backing focuses this product on situations where pressure-sensitive bonding is part of the shop process, aligning with workflows that favor adhesive-backed surfacing rather than traditional glue-spread steps.
The pressure-sensitive adhesive back on this PSA veneer sheet standardizes how the veneer bonds to the substrate, giving installers a consistent bonding method from sheet to sheet, which supports more predictable results across repeated cabinet runs. The 48x96 dimension provides a fixed layout reference, helping drafters and fabricators design panel sizes and cutlists that fall within the sheet footprint, which can reduce field joints and secondary seams. The A GRD mention in the 4X8 PSA 9505 AFR MAHOG F/C A GRD description indicates a graded face, reinforcing selection for visible surfaces where a defined appearance range supports uniform project results. The clearly documented MAAPN38RB4F manufacturer part number connects ordering and shop documentation to the same FormWood mahogany veneer, easing future replacements when an existing installation needs matching surfacing. As a wood veneer sheet from FormWood, this product integrates into established veneer sheet workflows, supporting repeatable handling and processing methods already built around this category.
The FormWood mahogany PSA veneer sheet is 48x96 inches, described as 4X8, so it aligns with common panel dimensions used in cabinet and casework fabrication.
This wood veneer sheet has a PSA back, meaning pressure-sensitive adhesive backing, so it bonds by applying pressure rather than using separate liquid adhesive during installation.
The face of this veneer sheet is mahogany, supporting projects where a mahogany wood appearance is specified for cabinets, furniture, or architectural panels.
This sheet is in the Edgebanding & Surfacing category under Veneer Sheets, within the wood veneer sheets product class, so it is intended for surfacing applications.
The A GRD reference in the 4X8 PSA 9505 AFR MAHOG F/C A GRD description indicates a graded face, supporting selection for visible surfaces needing consistent appearance.
The MAAPN38RB4F manufacturer part number uniquely identifies this FormWood mahogany PSA veneer, helping you reorder the same sheet when matching previous work.
The FormWood Mahogany 48x96 PSA back wood veneer sheet, MAAPN38RB4F, gives you a defined mahogany veneer surface in a standard 4X8 format that aligns with cabinet and casework dimensions, supporting efficient panel layout. Its PSA back wood veneer sheet construction provides a pressure-sensitive adhesive backing that fits workflows built around adhesive-backed veneers. The A GRD reference in the SAP description reinforces its role on visible faces where graded appearance supports consistent project results. For woodworking shops and installers needing a wood veneer sheet for edgebanding and surfacing, this FormWood mahogany option offers a clearly specified choice to standardize future jobs.
Sold In: 1 Each